[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 72.

SamAlackass

newbie

Activity: 27

Merit: 1

Quote from: Rakly3 on June 10, 2019, 09:42:26 PM

Quote from: SamAlackass on June 10, 2019, 04:07:36 PM

What tool are you using to set compute mode?

It's not recent, but still works
https://bitcointalksearch.org/topic/tool-amd-compute-switcher-for-switch-automatically-to-compute-mode-2815803

(this doesn't apply to cards with HBM2)

Thank you for the link! I can't believe it never came up before.

grimskal

newbie

Activity: 6

Merit: 0

Quote from: Ngenah Euy on June 11, 2019, 02:17:42 AM

how to select certain GPUs in rigs? thanks

teamredminer.exe --help

-d, --devices=DEVLIST Sets gpu devices to use from detected list. DEVLIST should be a comma-
separated list of device indices, e.g. -d 0,1,2,4. If not specified, all
devices on the platform(s) will be used. NOTE: if using --bus_reorder, the
indices used are after reordering. Use --list_devices to show indices.

Ngenah Euy

jr. member

Activity: 207

Merit: 5

how to select certain GPUs in rigs? thanks

Rakly3

newbie

Activity: 45

Merit: 0

Quote from: SamAlackass on June 10, 2019, 04:07:36 PM

What tool are you using to set compute mode?

It's not recent, but still works
https://bitcointalksearch.org/topic/tool-amd-compute-switcher-for-switch-automatically-to-compute-mode-2815803

(this doesn't apply to cards with HBM2)

Beruang123

newbie

Activity: 10

Merit: 0

Quote from: kerney666 on June 10, 2019, 12:53:13 PM

Quote from: ggarbi on June 10, 2019, 11:38:56 AM

Quote from: Beruang123 on June 10, 2019, 09:36:39 AM

Quote from: kerney666 on June 10, 2019, 05:06:18 AM

Quote from: ggarbi on June 08, 2019, 10:56:47 AM

Hey all.
I have problem with my 7x xfx vega 64 rig.
Im using 1050 mem 1175 core clocks and registery edited my rig and using 19.4.1 driver.
When i mine one of my gpus going down (lights off but still working but not mining) im using 14*14:aaa
It is happening after a day or two after i run Team red miner (using 0.5.0)

Hi! Is it always the same gpu? Have you tried reducing clocks/increasing voltage just a little for that gpu?

I have the same issue with 2 of my rigs, and always happen with GPU 4. Tried lower the clocks and increase the voltage but same error occured. Cannot mine for 24 hours without error

Yeah its happening to me too. Always one gpu making all rig crashed (rest of gpus working with all lights up but one of them working lights off and ofc,not mining)

Hmm. A little weird this one. Is this for CN/r or some other algo? Or any algo? Does running an older version solve the problem, ie you can run stable for a long time?

We have one small bugfix on the way out, can’t really see that it would be the issue here though, but who knows.

I am mining cn_saber, tried both 5.0 version and 5.1 version, all have the same result.... error with GPU no 4

SamAlackass

newbie

Activity: 27

Merit: 1

What tool are you using to set compute mode?

Rakly3

newbie

Activity: 45

Merit: 0

Quote from: Duck Hellen on June 10, 2019, 01:38:08 PM

I managed to solve today "one card crashing issue" on windows 10 Looks like compute mode switch is broken either by script and by swiching it manually in amd "control center" give me same result. So too gets cards too work i need to be in "graphic mode"... But in registry editor :

Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}

You can see your cards 0001 0002 etc... and there is "blokchain support setting" or something like that " with "0 value" I think that it is Huh

new name of "compute mode" after swichng it to "1 value" everefing still works fine

im on 19.6.1 driver

I just uninstalled all the AMD software and kept the drivers + a tool that can enable/disable compute mode. Card behaves now.
IMO it's wattman causing much of system instabilities. Even if you never 'turned it on', it is still being used.

The "blockchain support" is just the new feature AMD put in to switch memory timings
0 = auto
1 = level 1
2 = level 2
What the timings are, pfft I dunno. I don't see anything different using my tools. But it does affect hashrate a little.

Duck Hellen

newbie

Activity: 1

Merit: 0

I managed to solve today "one card crashing issue" on windows 10 Looks like compute mode switch is broken either : by tool that can enable/disable compute mode , and by swiching it manually in amd "control center" give me same result. So too gets cards too work i need to be in "graphic mode"... But in registry editor :

Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}

You can see your cards 0001 0002 etc... and there is "blokchain support setting" or something like that " with "0 value" I think that it is Huh

new name of "compute mode" after swichng it to "1 value" everefing still works fine

im on 19.6.1 driver

kerney666

member

Activity: 658

Merit: 86

Quote from: ggarbi on June 10, 2019, 11:38:56 AM

Quote from: Beruang123 on June 10, 2019, 09:36:39 AM

Quote from: kerney666 on June 10, 2019, 05:06:18 AM

Quote from: ggarbi on June 08, 2019, 10:56:47 AM

Hey all.
I have problem with my 7x xfx vega 64 rig.
Im using 1050 mem 1175 core clocks and registery edited my rig and using 19.4.1 driver.
When i mine one of my gpus going down (lights off but still working but not mining) im using 14*14:aaa
It is happening after a day or two after i run Team red miner (using 0.5.0)

Hi! Is it always the same gpu? Have you tried reducing clocks/increasing voltage just a little for that gpu?

I have the same issue with 2 of my rigs, and always happen with GPU 4. Tried lower the clocks and increase the voltage but same error occured. Cannot mine for 24 hours without error

Yeah its happening to me too. Always one gpu making all rig crashed (rest of gpus working with all lights up but one of them working lights off and ofc,not mining)

Hmm. A little weird this one. Is this for CN/r or some other algo? Or any algo? Does running an older version solve the problem, ie you can run stable for a long time?

We have one small bugfix on the way out, can’t really see that it would be the issue here though, but who knows.

ggarbi

jr. member

Activity: 43

Merit: 1

Quote from: Beruang123 on June 10, 2019, 09:36:39 AM

Quote from: kerney666 on June 10, 2019, 05:06:18 AM

Quote from: ggarbi on June 08, 2019, 10:56:47 AM

Hey all.
I have problem with my 7x xfx vega 64 rig.
Im using 1050 mem 1175 core clocks and registery edited my rig and using 19.4.1 driver.
When i mine one of my gpus going down (lights off but still working but not mining) im using 14*14:aaa
It is happening after a day or two after i run Team red miner (using 0.5.0)

Hi! Is it always the same gpu? Have you tried reducing clocks/increasing voltage just a little for that gpu?

I have the same issue with 2 of my rigs, and always happen with GPU 4. Tried lower the clocks and increase the voltage but same error occured. Cannot mine for 24 hours without error

Yeah its happening to me too. Always one gpu making all rig crashed (rest of gpus working with all lights up but one of them working lights off and ofc,not mining)

Beruang123

newbie

Activity: 10

Merit: 0

Quote from: kerney666 on June 10, 2019, 05:06:18 AM

Quote from: ggarbi on June 08, 2019, 10:56:47 AM

Hey all.
I have problem with my 7x xfx vega 64 rig.
Im using 1050 mem 1175 core clocks and registery edited my rig and using 19.4.1 driver.
When i mine one of my gpus going down (lights off but still working but not mining) im using 14*14:aaa
It is happening after a day or two after i run Team red miner (using 0.5.0)

Hi! Is it always the same gpu? Have you tried reducing clocks/increasing voltage just a little for that gpu?

I have the same issue with 2 of my rigs, and always happen with GPU 4. Tried lower the clocks and increase the voltage but same error occured. Cannot mine for 24 hours without error

Rakly3

newbie

Activity: 45

Merit: 0

How, if possible, can I run autotune with only X*Y ? (thus no X-Y, X+Y)

thanks!
ilovetrm

Iamtutut

full member

Activity: 1120

Merit: 131

Quote from: kerney666 on June 10, 2019, 05:11:17 AM

Quote from: Vampire_sumy on June 10, 2019, 03:57:03 AM

I am sorry, but i have to ask you again - do you plan to add cn_gpu algo to the trm (ryo coin) ?

Hi! Sorry, forgot to reply the last time! Right now we’ll look at other algos rather than more CN variants. We might return to variants like conceal and cn_gpu after that.

I see argon2id getting more and more interest, I think you really should consider it. There's even a bounty to develop a argon2id GPU miner (TRTL community).

kerney666

member

Activity: 658

Merit: 86

Quote from: Vampire_sumy on June 10, 2019, 03:57:03 AM

I am sorry, but i have to ask you again - do you plan to add cn_gpu algo to the trm (ryo coin) ?

Hi! Sorry, forgot to reply the last time! Right now we’ll look at other algos rather than more CN variants. We might return to variants like conceal and cn_gpu after that.

kerney666

member

Activity: 658

Merit: 86

Quote from: ggarbi on June 08, 2019, 10:56:47 AM

Hey all.
I have problem with my 7x xfx vega 64 rig.
Im using 1050 mem 1175 core clocks and registery edited my rig and using 19.4.1 driver.
When i mine one of my gpus going down (lights off but still working but not mining) im using 14*14:aaa
It is happening after a day or two after i run Team red miner (using 0.5.0)

Hi! Is it always the same gpu? Have you tried reducing clocks/increasing voltage just a little for that gpu?

Vampire_sumy

member

Activity: 110

Merit: 10

I am sorry, but i have to ask you again - do you plan to add cn_gpu algo to the trm (ryo coin) ?

ggarbi

jr. member

Activity: 43

Merit: 1

Hey all.
I have problem with my 7x xfx vega 64 rig.
Im using 1050 mem 1175 core clocks and registery edited my rig and using 19.4.1 driver.
When i mine one of my gpus going down (lights off but still working but not mining) im using 14*14:aaa
It is happening after a day or two after i run Team red miner (using 0.5.0)

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: todxx on June 07, 2019, 03:26:02 PM

Team Red Miner v0.5.1 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.1

Added better support for CN intensities 16*15, use --allow_large_alloc under Linux.
Added --no_ntime_roll for mining x16rt on e.g. bsod.pw.
Added Tonga device recognition.
Better error reporting for pool communication issues.

This release addresses a few minor issues people have reported in the v0.5.0 release.

and just when i was about to post results with my vega VII for cnr for v0.5.0 release
3.33k for cnr with 13*13:AAA per vega VII under win10x64 with 19.5.2 drivers with both air cooled and water cooled cards.

fmz89

legendary

Activity: 1764

Merit: 1002

V0.5 amazing , very stable on poolhash

todxx

member

Activity: 176

Merit: 76

Team Red Miner v0.5.1 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.1

Added better support for CN intensities 16*15, use --allow_large_alloc under Linux.
Added --no_ntime_roll for mining x16rt on e.g. bsod.pw.
Added Tonga device recognition.
Better error reporting for pool communication issues.

This release addresses a few minor issues people have reported in the v0.5.0 release.

Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 72. (Read 211762 times)