[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 73.

SigiSinatra

newbie

Activity: 50

Merit: 0

Quote from: seefatlow on June 07, 2019, 01:39:06 PM

Quote from: todxx on June 05, 2019, 04:08:08 PM

Team Red Miner v0.5.0 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.0

Added cryptonight 4MB variants: heavy, haven and saber.
Added x16 algo suite: x16r, x16s, x16rt (both gin and veil).
Auto-tuning mode for all CN variants, see bundled guide.
Manual key-driven CN tuning mode available inside the miner.
Additional data in miner stats console output.
Watchdog now detecting single stuck thread when mining CN.
Fix: in rare cases, poolside hash for compute algos (lyra2z, phi2, lyra2rev3) only reached ~95% of expected value.

We've added new algos for 4MB/heavy CN variants! Now you can mine haven/bittube with TRM

We've also added more finetuning options, as well as built-in auto-tuning to find the best config!

Kudos Todd and Kerney for releasing not just 1 algo but a whole bunch of them. You guys have truly outdone yourselves this time.

BTW, I am unable to access the Github download site. It says site not found. Any ideas?

Try here : https://github.com/todxx/teamredminer/releases

seefatlow

jr. member

Activity: 80

Merit: 1

Quote from: todxx on June 05, 2019, 04:08:08 PM

Team Red Miner v0.5.0 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.0

Added cryptonight 4MB variants: heavy, haven and saber.
Added x16 algo suite: x16r, x16s, x16rt (both gin and veil).
Auto-tuning mode for all CN variants, see bundled guide.
Manual key-driven CN tuning mode available inside the miner.
Additional data in miner stats console output.
Watchdog now detecting single stuck thread when mining CN.
Fix: in rare cases, poolside hash for compute algos (lyra2z, phi2, lyra2rev3) only reached ~95% of expected value.

We've added new algos for 4MB/heavy CN variants! Now you can mine haven/bittube with TRM

We've also added more finetuning options, as well as built-in auto-tuning to find the best config!

Kudos Todd and Kerney for releasing not just 1 algo but a whole bunch of them. You guys have truly outdone yourselves this time.

BTW, I am unable to access the Github download site. It says site not found. Any ideas?

kerney666

member

Activity: 658

Merit: 86

Quote from: ALEX_RAA on June 07, 2019, 10:36:00 AM

i'm an idiot!
I thought that trm is use timings... but this auto-tune is only trm tuning. All is good for me now, just setup up timings for that rig

Got it. You have my utmost respect for coming clean Grin

.

ALEX_RAA

newbie

Activity: 78

Merit: 0

i'm an idiot!
I thought that trm is use timings... but this auto-tune is only trm tuning. All is good for me now, just setup up timings for that rig

ALEX_RAA

newbie

Activity: 78

Merit: 0

Quote from: kerney666 on June 07, 2019, 09:23:43 AM

Wow, that sounds very strange. Do you have other ref V56s in the other rigs using the same timings? If so, what does the auto-tuning choose for those gpus?

i have other rigs with vega56 ref (sams mem) but different brends, they all use lucky timings from trm help file
on one rig autotune sets 14*13:AAA and on another 14*14:AAA but all of my vegas56 (expect those x3 that i describe before) gives average 2230-2300 h/s on cnr

p.s. may be i don't know it's problem from motherboard?! i have h110 asrock btc pro (13 pci-e) and celeron 2.8ghz, 4gb ram

kerney666

member

Activity: 658

Merit: 86

Quote from: ALEX_RAA on June 07, 2019, 08:33:02 AM

it's strange situation:
- win 10 1709, updates are off
- pagefile 75gb
- mixed rig: 5x-rx570(4gb)+3x-vega56 (ref, not flashed, sams memory)

trm 0.4.5 with my manual timings tuning: cnr 11.77kh/s (vegas gives 2230-2250)
trm 0.5 with auto-tuning gives only 11kh/s (vegas gives only 1980-1950)

autotuning from trm 0.5 set for all vegas 14+14:AAA, but if i manualy change it to 14*14:AAA there is no difference

but my manual timings for vegas is from trm help file so i don't understand =]

p.s. on my other rigs all vegas works even faster with trm 0.5 and autotuning

Wow, that sounds very strange. Do you have other ref V56s in the other rigs using the same timings? If so, what does the auto-tuning choose for those gpus?

ALEX_RAA

newbie

Activity: 78

Merit: 0

it's strange situation:
- win 10 1709, updates are off
- pagefile 75gb
- mixed rig: 5x-rx570(4gb)+3x-vega56 (ref, not flashed, sams memory)

trm 0.4.5 with my manual timings tuning: cnr 11.77kh/s (vegas gives 2230-2250)
trm 0.5 with auto-tuning gives only 11kh/s (vegas gives only 1980-1950)

autotuning from trm 0.5 set for all vegas 14+14:AAA, but if i manualy change it to 14*14:AAA there is no difference

but my manual timings for vegas is from trm help file so i don't understand =]

p.s. on my other rigs all vegas works even faster with trm 0.5 and autotuning

todxx

member

Activity: 176

Merit: 76

Quote from: nordmann666 on June 07, 2019, 03:08:31 AM

great update...but only one rig is working...other one make some trouble

i set different voltages (560-575mv) but TRM shows 875mv on each GPU?! on the other rigs it shows me different voltages (but not the numbers i set in ODNT)

and i tried RVN - the RPC reconnect problem with suprnova - if i set the "--pool_broken_rpc" i dont get shares in tuning mode - only get shares without the "--pool_broken_rpc" (but reconnects sucks)

Suprnova doesn't seem to like extra nonce subscription on its pools. Can you try again with the --pool_no_ensub option?

nordmann666

member

Activity: 363

Merit: 16

great update...but only one rig is working...other one make some trouble

i set different voltages (560-575mv) but TRM shows 875mv on each GPU?! on the other rigs it shows me different voltages (but not the numbers i set in ODNT)

and i tried RVN - the RPC reconnect problem with suprnova - if i set the "--pool_broken_rpc" i dont get shares in tuning mode - only get shares without the "--pool_broken_rpc" (but reconnects sucks)

Vampire_sumy

member

Activity: 110

Merit: 10

Hi, do you have any plans to add cn_gpu algo into trm ?

livada

newbie

Activity: 417

Merit: 0

Quote from: todxx on June 06, 2019, 07:37:16 PM

Quote from: livada on June 06, 2019, 06:09:26 PM

Just one question. Is it better to run the SCAN autotuning with the AMD MEM TWEAK turned off? Does auto tuning eliminate AMD MEM TWEAK or is it better to use the well-known AMD mem tweak setting with autotuning?

You'll want to apply your memory timing adjustments (and voltage/clock settings) before doing the auto-tune.

The auto-tune tests a number of different TRM settings, it does not change any timings/clocks/voltages on the GPUs.
It's also probably a good idea to re-run the auto-tune after changing clocks or timings to make sure that the best config didn't change.

thx.

i test 1 rig(6*hynix CNR). before i use 15*15=11880HR 994W(11.94h/w) now quick test say 13*13:AAA=12050HR 1040W(11.58h/w).
Hr is better but HR per Wat is lower

Haven is GREAT. Before (srb) i have 10900HR 960W or 11300HR 1010W
now TRM 12100Hr 920W

todxx

member

Activity: 176

Merit: 76

Quote from: livada on June 06, 2019, 06:09:26 PM

Just one question. Is it better to run the SCAN autotuning with the AMD MEM TWEAK turned off? Does auto tuning eliminate AMD MEM TWEAK or is it better to use the well-known AMD mem tweak setting with autotuning?

You'll want to apply your memory timing adjustments (and voltage/clock settings) before doing the auto-tune.

The auto-tune tests a number of different TRM settings, it does not change any timings/clocks/voltages on the GPUs.
It's also probably a good idea to re-run the auto-tune after changing clocks or timings to make sure that the best config didn't change.

livada

newbie

Activity: 417

Merit: 0

Just one question. Is it better to run the SCAN autotuning with the AMD MEM TWEAK turned off? Does auto tuning eliminate AMD MEM TWEAK or is it better to use the well-known AMD mem tweak setting with autotuning?

kerney666

member

Activity: 658

Merit: 86

Quote from: SigiSinatra on June 06, 2019, 11:30:29 AM

Quote from: kerney666 on June 06, 2019, 10:49:26 AM

Quote from: SigiSinatra on June 06, 2019, 10:03:58 AM

Can you please add timerolling on/off option ?
I can't use miner on some pools because off timerolling.
Thank You.

Interesting, can you PM an example? I’m guessing this might be x16rt?

Yes, I was trying to mine Veil (x16rt) on bsod pool.

Some pool owners suggested to set timerolling off by default. So far, I can mine Veil only on one "small" pool with teamredminer. All other pools reject shares.

We’ll fix it shortly, I would guess an update is out by tomorrow, if not sooner.

ku4eto

jr. member

Activity: 194

Merit: 4

Kerney, the issue with the GPU dying, because of reaching 81*C continues. Miner API becomes unresponsive, and i gotta do hard reset, otherwise with a "emergency" reset, the GPU does not boot.
This kind of GPU dying is new to me, usually the miner detects it as DEAD somehow, or the OS crashes.

SigiSinatra

newbie

Activity: 50

Merit: 0

Quote from: kerney666 on June 06, 2019, 10:49:26 AM

Quote from: SigiSinatra on June 06, 2019, 10:03:58 AM

Can you please add timerolling on/off option ?
I can't use miner on some pools because off timerolling.
Thank You.

Interesting, can you PM an example? I’m guessing this might be x16rt?

Yes, I was trying to mine Veil (x16rt) on bsod pool.
https://i.imgur.com/accBnkP.png

Some pool owners suggested to set timerolling off by default. So far, I can mine Veil only on one "small" pool with teamredminer. All other pools reject shares.

kerney666

member

Activity: 658

Merit: 86

Quote from: SigiSinatra on June 06, 2019, 10:03:58 AM

Can you please add timerolling on/off option ?
I can't use miner on some pools because off timerolling.
Thank You.

Interesting, can you PM an example? I’m guessing this might be x16rt?

SigiSinatra

newbie

Activity: 50

Merit: 0

Can you please add timerolling on/off option ?
I can't use miner on some pools because off timerolling.
Thank You.

Iamtutut

full member

Activity: 1120

Merit: 131

Very impressive upgrade, a few extra hundred hashes with Turtlecoin and very good implementation of CN Heavy algos.

Excellent work, kudos to the devs.

Mashy81

jr. member

Activity: 225

Merit: 1

Great update. Auto tune works great.
Pickedup an extra 400hs on 4xvega rig and only an extra 20watts.
Have only tried cnr so far

Vega 56 1407/930/875mv 2240hs 13*13:AAA

Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More - page 73. (Read 211762 times)