marto, did the unit use 4800 rpm SUNON?
yes but also We have a few thousand FINGER GUARD; For Use With:92mm Axialon the way to us
Nice, i am prefer 4800 rpm SUNON
, the performance is remarkable.
Topic: [ANN] Technobit HEX8A1 -240 GHs Coincraft A1 board- Finished production - page 41. (Read 72425 times)
February 05, 2014, 07:52:57 PM
on the way to us
Nice, i am prefer 4800 rpm SUNON
, the performance is remarkable.
February 05, 2014, 07:50:39 PM
marto, did the unit use 4800 rpm SUNON?
yes but also We have a few thousand FINGER GUARD; For Use With:92mm Axialon the way to us
February 05, 2014, 07:35:12 PM
marto, did the unit use 4800 rpm SUNON?
February 05, 2014, 07:20:38 PM
still not measured with correct gear
February 05, 2014, 07:17:11 PM
Gratz on making it to your advertised GH! How much power is it pulling? Still 1GH/1W?
February 05, 2014, 06:47:38 PM
February 05, 2014, 06:12:27 PM
February 04, 2014, 10:06:18 AM
Hello Martin,
Is is possible to change the delivery address for order EJYKOZQDX ?
I have already added the new address on technobit.eu, I just want to change the address reference (from "ST CANNAT" to "DIGI").
Note that this is only for delivery, not the billing address.
Thanks a lot.
Is is possible to change the delivery address for order EJYKOZQDX ?
I have already added the new address on technobit.eu, I just want to change the address reference (from "ST CANNAT" to "DIGI").
Note that this is only for delivery, not the billing address.
Thanks a lot.
Done, thanks martin.
February 04, 2014, 04:25:42 AM
Hello Martin,
Is is possible to change the delivery address for order EJYKOZQDX ?
I have already added the new address on technobit.eu, I just want to change the address reference (from "ST CANNAT" to "DIGI").
Note that this is only for delivery, not the billing address.
Thanks a lot.
Is is possible to change the delivery address for order EJYKOZQDX ?
I have already added the new address on technobit.eu, I just want to change the address reference (from "ST CANNAT" to "DIGI").
Note that this is only for delivery, not the billing address.
Thanks a lot.
February 03, 2014, 05:28:50 PM
only end of FEB batch is available now
February 03, 2014, 04:41:25 PM
What's the eta on the HEX8A1 next shipments?
The website says no longer in stock.
The website says no longer in stock.
February 03, 2014, 09:37:15 AM
Sorry to post here, but how often are customer service messages read? I have not got any answers since 15th january (AGMBGDVYG)
He reads them and ignores them all the time.
I hope that is irony
I ordered hex16B but wanting to refund then pay more and order hex8A1, but I already missed feb 10th batch.. If nobody deals with https://technobit.eu/index.php?controller=contact that link, simply remove it or say that this is oneway communication only It's just getting hilarious...
EDIT: just came in: Your order with the reference AGMBGDVYG from TechnoBit has been cancelled.
Thank you TechnoBit!
EDIT2: Even changed to hex8A1. Again thank you! It's very pleasing to get things moving
February 03, 2014, 08:03:57 AM
Sorry to post here, but how often are customer service messages read? I have not got any answers since 15th january (AGMBGDVYG)
He reads them and ignores them all the time.
February 03, 2014, 05:47:26 AM
Sorry to post here, but how often are customer service messages read? I have not got any answers since 15th january (AGMBGDVYG)
February 02, 2014, 05:43:33 AM
After 12 hours 250 Ghs
....
Nice low HW rate too.....
What is the power consumption at 250GH/s ?
that is one of the main reasons for low hw. Good hw deserves good software. And we have them all.And reject ratio 0.14% only insane!!! This is one of the most strict pools where rejected shares are common.
What makes something perfect are the small details which are not noticed by most of the guys
February 02, 2014, 05:39:53 AM
Nice low HW rate too.
What is the power consumption at 250GH/s ?
What is the power consumption at 250GH/s ?
February 02, 2014, 05:34:19 AM
You are pros guys!
That is what I call perfect. Congrats for the results!,,
February 02, 2014, 03:28:13 AM
February 01, 2014, 04:05:48 PM
Gratz Marto! Can't wait to get my hands on them. You make all the other A1 board makers jealous!
February 01, 2014, 04:04:12 PM
Awesome work Marto!
I understand and high price, its kind of ptototype stage and pcb manufacture in low amounts cost a lot.
I hope when you confirmed design and spec can work on a pricing.
Once again, good job.
I understand and high price, its kind of ptototype stage and pcb manufacture in low amounts cost a lot.
I hope when you confirmed design and spec can work on a pricing.
Once again, good job.
Jump to: