[ANN] The First Litecoin PPS Pool (litecoinpool.org) - page 25.

Carlo73

newbie

Activity: 2

Merit: 0

Quote from: lennyNO on January 02, 2018, 06:57:47 PM

Quote from: Carlo73 on January 02, 2018, 05:15:37 AM

I am thinking about purchasing one more AntMiner L3+ but I am afraid of earning decrease once the March batch will be released of L3's by Bitmain.
Can you please share your opinion/vision/experience on how big is the decrease in the earning (lets say of one L3 miner) once the batch has been released and the miners come online?
Or the decrease is not that significant that you could sense it?

This question doesn't really belong here, but it is a telling sign that since the last 4 weeks alone the difficulty has jumped a factor 2.5 (!) (https://bitinfocharts.com/comparison/litecoin-difficulty.html#3m) Right now you would earn 2LTC/mo or ca 500$/mo. That's still not bad (before december, if you held on to the coins, would have earned 1250$/mo!, that's why it is so important to come in as early as possible). But by end march that could easily have dropped to halve or less, and then it depends on where LTC goes, it if halves too, then go figure, it may take a loooong time to recoup the cost. Of course, if LTC goes to 1000$ then that would help a lot. Note that difficulty also swings with the price as some big miners move in/out depending on profitability.

Thanks very much for the opinion.
The charts are really helpfull in order to make my decision, I wasn't aware of this site.

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Just an aside.....www.litecoinpool.org...is run out of the United Kingdom correct? I mean the owner pooler

and if there is a 'source of operations' outside of various server locations, that would be it?

Curious. (Likely, I'm completely off on this)

Brad

lennyNO

newbie

Activity: 76

Merit: 0

Quote from: Carlo73 on January 02, 2018, 05:15:37 AM

I am thinking about purchasing one more AntMiner L3+ but I am afraid of earning decrease once the March batch will be released of L3's by Bitmain.
Can you please share your opinion/vision/experience on how big is the decrease in the earning (lets say of one L3 miner) once the batch has been released and the miners come online?
Or the decrease is not that significant that you could sense it?

This question doesn't really belong here, but it is a telling sign that since the last 4 weeks alone the difficulty has jumped a factor 2.5 (!) (https://bitinfocharts.com/comparison/litecoin-difficulty.html#3m) Right now you would earn 2LTC/mo or ca 500$/mo. That's still not bad (before december, if you held on to the coins, would have earned 1250$/mo!, that's why it is so important to come in as early as possible). But by end march that could easily have dropped to halve or less, and then it depends on where LTC goes, it if halves too, then go figure, it may take a loooong time to recoup the cost. Of course, if LTC goes to 1000$ then that would help a lot. Note that difficulty also swings with the price as some big miners move in/out depending on profitability.

Carlo73

newbie

Activity: 2

Merit: 0

Hi Guys,
I would like to have a question.
I am thinking about purchasing one more AntMiner L3+ but I am afraid of earning decrease once the March batch will be released of L3's by Bitmain.
Can you please share your opinion/vision/experience on how big is the decrease in the earning (lets say of one L3 miner) once the batch has been released and the miners come online?
Or the decrease is not that significant that you could sense it?
Many thanks in advance for your feedback.

pooler

hero member

Activity: 848

Merit: 507

Quote from: smilinj on December 28, 2017, 04:08:04 PM

Antminer L3+ unable to establish Support for Stratum over SSL/TLS.

As far as I know, the stock firmware of Antminers does not support Stratum over TLS.

smilinj

newbie

Activity: 2

Merit: 0

Antminer L3+ unable to establish Support for Stratum over SSL/TLS.

My kernel log reports unable to resolve host on 3443 when configured like this stratum+tcp://us2.litecoinpool.org:3443

When configured like this stratum+tcp://us2.litecoinpool.org:3333 it connects no problem.

Any help is much appreciated!

Jacktgns

newbie

Activity: 11

Merit: 0

hi, after the previous post I must say that my luck has changed at this time my miners are showing higher value, values that are now more congruent.
532.8 MH/s / 558.2 MH/s
https://prnt.sc/htfql9

I hope they stay, I will continue monitoring...

Jacktgns

newbie

Activity: 11

Merit: 0

Quote from: pooler on December 28, 2017, 11:27:04 AM

The 24-hour average is low because, as you can see in the screenshot I posted above, your miners were inactive for some time during the last 24 hours.

ok, thanks for the clarification, there are about 2 or 3 hours where I change to prohashing because I wanted to test the effectiveness of my miners and compare with litecoinpool

pooler

hero member

Activity: 848

Merit: 507

Quote from: Jacktgns on December 28, 2017, 11:11:10 AM

Quote from: pooler on December 28, 2017, 04:00:42 AM

Quote from: Jacktgns on December 27, 2017, 08:35:39 PM

Hi, I've also seen slow hashrate in my 2 miners, always below 500 and before they were always above 500, something change?

Jacktgns, I just had a look at your worker charts, and I see no difference in hash rate between now and two weeks ago. If you're talking about the "current" speed, it is always subject to fluctuations, as explained in the FAQ.

I can't see the data you are referring to

Sure you can, just click on Charts in the top menu. Here's a screenshot: https://prnt.sc/htf5sv

Quote from: Jacktgns on December 28, 2017, 11:11:10 AM

but I can say that I don't think the information that is now showing is correct.

current speed: 507.2 MH/s / 519.4 MH/s
24-Hours: 326.3 MH/s / 321.9 MH/s
https://prnt.sc/htf26b

my boards work without problems.
at this moment I am lucky that it exceeds 500 MH/s

The 24-hour average is low because, as you can see in the screenshot I posted above, your miners were inactive for some time during the last 24 hours.

Jacktgns

newbie

Activity: 11

Merit: 0

Hi, I've also seen slow hashrate in my 2 miners, always below 500 and before they were always above 500, something change?
[/quote]
Jacktgns, I just had a look at your worker charts, and I see no difference in hash rate between now and two weeks ago. If you're talking about the "current" speed, it is always subject to fluctuations, as explained in the FAQ.
[/quote]
I can't see the data you are referring to but I can say that I don't think the information that is now showing is correct.

current speed: 507.2 MH/s / 519.4 MH/s
24-Hours: 326.3 MH/s / 321.9 MH/s
https://prnt.sc/htf26b

my boards work without problems.
at this moment I am lucky that it exceeds 500 MH/s

Jacktgns

newbie

Activity: 11

Merit: 0

Quote from: Faeleaf on December 28, 2017, 07:03:20 AM

Quote from: pooler on December 28, 2017, 04:00:42 AM

Quote from: Jacktgns on December 27, 2017, 07:48:04 PM

Hi, I have a confusion or doubt with the statistics, I have 2 l3+ mining with litecoinpool, in theory my contribution is 1000MH/s. in statistics I always see what I should do 0.1 LTC/d, of course I can not see the next number, it would be clearer if the statistics showed me 0.1x for example, Is there any way to see more accurately the projected earnings per day?

The number on the Stats page is just for rough comparison with the Top 30. If you want to know how much you've made in the last 24 hours, see the "Past 24 hours Rewards" on your account page. If you want to estimate your earnings for the future, use the Calc.

I think he's asking for something like 'Projected Rewards':

right, it's just what I mean

Faeleaf

newbie

Activity: 1

Merit: 0

Quote from: pooler on December 28, 2017, 04:00:42 AM

Quote from: Jacktgns on December 27, 2017, 07:48:04 PM

Hi, I have a confusion or doubt with the statistics, I have 2 l3+ mining with litecoinpool, in theory my contribution is 1000MH/s. in statistics I always see what I should do 0.1 LTC/d, of course I can not see the next number, it would be clearer if the statistics showed me 0.1x for example, Is there any way to see more accurately the projected earnings per day?

The number on the Stats page is just for rough comparison with the Top 30. If you want to know how much you've made in the last 24 hours, see the "Past 24 hours Rewards" on your account page. If you want to estimate your earnings for the future, use the Calc.

I think he's asking for something like 'Projected Rewards':
https://i.imgur.com/ycjsjhV.png
(excuse the green on black, I prefer a dark colour scheme).
Projected Rewards is what the expected payout will be at the end of 24 hours, using the average since last paid out (and payout set to 24 hours, not in multiples of the payout threshold). I have a greasemonkey script that updates the value for me, but it requires knowing the payout time (hardcoded in at the moment, 22:05 for me). Past 24 hours Rewards is a pretty close indicator, though.

.. I should probably switch it over to keeping track of shares per hour, and then multiply that by the PPS, so it will track over difficulty changes...

flammeur

newbie

Activity: 19

Merit: 0

Hello folks ,

I recentyly restart my asic gridseed and everything work but for a short period of time.

I use bfminer 3.99 i setup the miner, start mining but after few minute my hasrate on the litecoinpool appear to 0 however on bfminer i can see it's still working

Did anyone got this issue of could recommand a good miner (i tryed few but could not manage to make them work) ?

i also tryed the last version bfminer but never manage to make it work if you have some tips appreciate ...

pooler

hero member

Activity: 848

Merit: 507

Quote from: Jacktgns on December 27, 2017, 07:48:04 PM

Hi, I have a confusion or doubt with the statistics, I have 2 l3+ mining with litecoinpool, in theory my contribution is 1000MH/s. in statistics I always see what I should do 0.1 LTC/d, of course I can not see the next number, it would be clearer if the statistics showed me 0.1x for example, Is there any way to see more accurately the projected earnings per day?

The number on the Stats page is just for rough comparison with the Top 30. If you want to know how much you've made in the last 24 hours, see the "Past 24 hours Rewards" on your account page. If you want to estimate your earnings for the future, use the Calc.

Quote from: smilinj on December 27, 2017, 07:49:53 PM

L3+ will not connect to litecoinpool 3443
stratum+tcp://us2.litecoinpool.org:3443
I receive the following kernel log error:
unable to resolve host. But it connects no problem to 3333 Any ideas?

Port 3443 is for Stratum over TLS. As far as I know, Antminers do not support this.

Quote from: Jacktgns on December 27, 2017, 08:35:39 PM

Quote from: tommy1033 on December 19, 2017, 05:48:17 PM

is anyone else getting slow hashrate on this pool ? my BFGminer shows 290 but im only getting around 250, been like that the last 2-3 days , had a steady 288-290 avareage before that

Hi, I've also seen slow hashrate in my 2 miners, always below 500 and before they were always above 500, something change?

Jacktgns, I just had a look at your worker charts, and I see no difference in hash rate between now and two weeks ago. If you're talking about the "current" speed, it is always subject to fluctuations, as explained in the FAQ.
I cannot check tommy1033's account because I do not know his username.

Jacktgns

newbie

Activity: 11

Merit: 0

Quote from: tommy1033 on December 27, 2017, 08:55:59 PM

Quote from: Jacktgns on December 27, 2017, 08:35:39 PM

Quote from: tommy1033 on December 19, 2017, 05:48:17 PM

is anyone else getting slow hashrate on this pool ? my BFGminer shows 290 but im only getting around 250, been like that the last 2-3 days , had a steady 288-290 avareage before that

Hi, I've also seen slow hashrate in my 2 miners, always below 500 and before they were always above 500, something change?

gotta be a change in the last week or so , i had a 290 mhs/24 hour and not im lucky if i go above 240
and nothing have changed , no burnt boards , no change in settings.

yeap same Issue.

tommy1033

newbie

Activity: 14

Merit: 0

Quote from: Jacktgns on December 27, 2017, 08:35:39 PM

Quote from: tommy1033 on December 19, 2017, 05:48:17 PM

is anyone else getting slow hashrate on this pool ? my BFGminer shows 290 but im only getting around 250, been like that the last 2-3 days , had a steady 288-290 avareage before that

Hi, I've also seen slow hashrate in my 2 miners, always below 500 and before they were always above 500, something change?

gotta be a change in the last week or so , i had a 290 mhs/24 hour and not im lucky if i go above 240
and nothing have changed , no burnt boards , no change in settings.

Jacktgns

newbie

Activity: 11

Merit: 0

Quote from: tommy1033 on December 19, 2017, 05:48:17 PM

is anyone else getting slow hashrate on this pool ? my BFGminer shows 290 but im only getting around 250, been like that the last 2-3 days , had a steady 288-290 avareage before that

Hi, I've also seen slow hashrate in my 2 miners, always below 500 and before they were always above 500, something change?

tommy1033

newbie

Activity: 14

Merit: 0

i think the only reason for having different ports is just if you got that port blocked by your internet provider you can swap port and continue mining

Jacktgns

newbie

Activity: 11

Merit: 0

Quote from: smilinj on December 27, 2017, 07:49:53 PM

L3+ will not connect to litecoinpool 3443
stratum+tcp://us2.litecoinpool.org:3443

I receive the following kernel log error:
unable to resolve host. But it connects no problem to 3333 Any ideas?

hi, my 2 l3+ are configured on port 3333 and work without problem
(stratum+tcp://us.litecoinpool.org:3333)
Do you have any reason to use port 3443?

smilinj

newbie

Activity: 2

Merit: 0

L3+ will not connect to litecoinpool 3443
stratum+tcp://us2.litecoinpool.org:3443

I receive the following kernel log error:
unable to resolve host. But it connects no problem to 3333 Any ideas?

Topic: [ANN] The First Litecoin PPS Pool (litecoinpool.org) - page 25. (Read 228113 times)