Any pools working ?
Some cant connect. others have "We are short of this currency (257.05219000 VIVO). Please STOP your miners and switch to BTC until we find more VIVO blocks.
YOU are responsible if you continue to mine for VIVO dispite this warning."
Topic: [ANN] VIVO - Masternodes, ASIC-Resistant, Secure, High MN Rewards, Decentralized - page 27. (Read 201504 times)
December 13, 2017, 01:22:56 AM
December 13, 2017, 01:09:11 AM
Use "vivo-cli getinfo" command and watch for errors in the bottom line. Should have no errors. On of my MNs showed "seems like cannot agree with peers" - something like this.
Use the above solutions, but also delete peers.dat file and other files, keep wallet.dat, vivo.conf files
Use the above solutions, but also delete peers.dat file and other files, keep wallet.dat, vivo.conf files
December 12, 2017, 11:48:09 PM
How to fix a stuck wallet (this time)
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
I have confirmed that this got me back in sync with the main chain.
I just opened my new wallet and it failed to receive coins. I tried going into the config file like you suggested, and the file appears to be empty. Is there some special program required for opening the file?
Just add the connect addresses to the config file, open in a text editor and save and restart the wallet, this is how i got mine to sync correctly
tried this but it's not working for me
December 12, 2017, 11:28:43 PM
I've send coins between my two wallets (MN deposit), and transaction was showing confirmed (10 confirmations) after ca. 2 hours. Now, i came back home (an hour later), and the status shows unconfirmed and there's nothing in both of my wallets. How to fix it? neither my receiving wallet, nor tx id show in the block explorer. What is going on? Is this a secure coin?
December 12, 2017, 11:19:23 PM
How to fix a stuck wallet (this time)
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
I have confirmed that this got me back in sync with the main chain.
I just opened my new wallet and it failed to receive coins. I tried going into the config file like you suggested, and the file appears to be empty. Is there some special program required for opening the file?
Just add the connect addresses to the config file, open in a text editor and save and restart the wallet, this is how i got mine to sync correctly
December 12, 2017, 10:40:36 PM
Bailed on this one. Miners wouldn't say connected.
December 12, 2017, 10:17:56 PM
How to fix a stuck wallet (this time)
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
I have confirmed that this got me back in sync with the main chain.
I just opened my new wallet and it failed to receive coins. I tried going into the config file like you suggested, and the file appears to be empty. Is there some special program required for opening the file?
December 12, 2017, 09:14:09 PM
it seems lie if you remove the connect= nodes the wallet does a rollback. If you are on the same height like the explorer please post the IP, i will add them to the "guide"
Wow what a shitty coin ...
Update: I'm sorry for what I said when i was hangery
December 12, 2017, 08:57:43 PM
it seems lie if you remove the connect= nodes the wallet does a rollback. If you are on the same height like the explorer please post the IP, i will add them to the "guide"
December 12, 2017, 08:32:59 PM
Any other pools than the list in the first post, all of them seems crap for me.
I got this often very often: Stratum connection failed: Failed to connect to eu1.altminer.net port 4233: Connection refused
I got this often very often: Stratum connection failed: Failed to connect to eu1.altminer.net port 4233: Connection refused
Same for me
December 12, 2017, 08:20:42 PM
How can you check if you are out of chain ?
December 12, 2017, 06:53:32 PM
How to fix a stuck wallet (this time)
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
I have confirmed that this got me back in sync with the main chain.
December 12, 2017, 06:53:05 PM
I'm having the same problem. Sent two transactions from Cryptopia to my Vivo wallet. Nothing. Been over an hour. Triple checked the addresses. Coin seems to be totally messed up.
I was considering a masternode, but now I'm super concerned if coins are disappearing when being sent. Deeply regretting not sending a tiny amount first.
I was considering a masternode, but now I'm super concerned if coins are disappearing when being sent. Deeply regretting not sending a tiny amount first.
December 12, 2017, 05:22:05 PM
How to fix a stuck wallet (this time)
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
IMPORTANT: Once your wallet is moving with the chain remove the connect= lines and uncomment everything else. Dont forget to stop your wallet first.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
this does not work, after full sync there is the same, wallet does not see tx from last several hours although they are in the chain and are visible in the block explorer Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
IMPORTANT: Once your wallet is moving with the chain remove the connect= lines and uncomment everything else. Dont forget to stop your wallet first.
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
currently wallet with 8 connections reports block heigh 73574 and is synchronized and according block explorer current is 73727
moving my mining to other neoscrypt coin until there will be any explanation from devs how is it possible that there is possible split in "asic resistant, secure" coin with masternodes.
December 12, 2017, 05:13:29 PM
Hi guyz I am new to this project and I may be interested in setting up a vivo masternode soon while it is still cheap. But I am kinda confused with the various chain split news I am seeing here.
My question now is that as a complete newbie to this project, how do I setup a working vivo MN on my own PC?? and also on a VPN server ?? Are there any updated videos on this that can guide me fully??
Thanks
My question now is that as a complete newbie to this project, how do I setup a working vivo MN on my own PC?? and also on a VPN server ?? Are there any updated videos on this that can guide me fully??
Thanks
December 12, 2017, 05:12:46 PM
I transfered all my vivo to coniomi. The transfer seems to have gone through according to the vivo core wallet, but nothing shows up in coinomi. It's been more than 24 hours now and I even chose the instant send.
https://i.imgur.com/Dikqwrk.jpg.
I have checked the address is correct. Could it have something to do with the chain split that was talked about? Should I follow the steps in the previous post on how to fix a stucked wallet?
Any help would be much appreciated, thanks!
https://i.imgur.com/Dikqwrk.jpg.
I have checked the address is correct. Could it have something to do with the chain split that was talked about? Should I follow the steps in the previous post on how to fix a stucked wallet?
Any help would be much appreciated, thanks!
December 12, 2017, 04:22:57 PM
How to fix a stuck wallet (this time)
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
IMPORTANT: KEEP THE CONNECT= for now! Once the chain is table remove the connect= lines and uncomment everything else. Dont forget to stop your wallet first. Check discord!
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
Do this on the affected wallet only!
Close your wallet / Stop your deamon
Win Wallets: Go to your %appdata%/VivoCore folder and delete the folders chainstate and blocks
Unix: Go to ~/.vivocore/ and delete the folders chainstate and blocks
Open your vivo.conf and comment EVERYTHING thats in there by putting a # at the beginning of each line
Add:
connect=80.208.225.127
connect=52.178.24.171:12845
connect=13.80.64.100:12845
connect=13.81.203.224:12845
connect=80.208.229.170:12845
connect=188.120.248.128:12845
save and exit.
Upstart your wallet/daemon. The sync will take longer as normal.
IMPORTANT: KEEP THE CONNECT= for now! Once the chain is table remove the connect= lines and uncomment everything else. Dont forget to stop your wallet first. Check discord!
If it works, donations welcome to: VZuH2xGyWNYPz5fvvEMWoEjpvGzSrz9WoG
December 12, 2017, 04:02:48 PM
there is something bad with this coin. I run the latest core wallet 0.12.1.7 and unable to see incoming transactions from the last 4 hours although wallet is reporting that is synchronized. I can see transactions on the chain in the explorer but wallet does not see them. I tried to run the wallet with rescan but still nothing - tx from last 4 hours are missing. Is it normal that several transactions are missing in the core wallet? no it is not
I can see that there was a chainsplit. My wallet reports last block 73571. But I can see the block 73693 in the altminer pool. Unimining pool and several others delisted VIVO for sure after the split. How is it possible with masternodes? Somebody took control over VIVO chain and in fact masternodes were only for a decoartion.
devs?
no it is notI can see that there was a chainsplit. My wallet reports last block 73571. But I can see the block 73693 in the altminer pool. Unimining pool and several others delisted VIVO for sure after the split. How is it possible with masternodes? Somebody took control over VIVO chain and in fact masternodes were only for a decoartion.
devs?
December 12, 2017, 02:56:58 PM
No way! tried a full resynch (wiping all the data with the 0.12.2.1) and all 12 peers show my old (yiimp.eu) height...
So I cant let it on yiimp.eu with current code. I may readd it after christmas... Even tried to set checkpoints of the explorer chain, no success
cryptopia and explorer on the correct chain, please addnode from https://www.cryptopia.co.nz/coininfo/?coin=VIVO , and resync
addnode=79.98.24.202:12845
addnode=80.209.224.186:12845
addnode=80.209.227.183:12845
addnode=80.209.232.208:12845
addnode=80.209.235.133:12845
addnode=31.214.149.159:12845
addnode=80.209.237.206:12845
addnode=98.201.202.45:12845
addnode=13.229.46.243:12845
addnode=45.33.34.72:12845
addnode=45.77.163.48:12845
addnode=80.209.225.201:12845
addnode=104.207.132.224:12845
addnode=138.197.24.167:12845
addnode=192.3.251.220:12845
addnode=198.13.35.37:12845
now I get my 4 mns back to the chain.
It is bad thing that we lack of support and communication here, Dev and us all in discord. LOL....
December 12, 2017, 02:50:30 PM
Can we have an official update from VIVO team about this chain split?
I just checked the MN list and almost 2/3 of them are in some sort of broken state.
Jump to: