more details of TreeChains?
here is a article by peter todd:
http://www.mail-archive.com/[email protected]/msg04388.htmlTree-chains preliminary summaryPeter Todd Tue, 25 Mar 2014 05:39:15 -0700
On Sat, Mar 22, 2014 at 12:43:34PM -0700, Mark Friedenbach wrote:
> Btw, any chance we could get a summary description of tree-chains
> posted to bitcoin-development?
sure1
Introduction
============Bitcoin doesn't scale. There's a lot of issues at hand here, but the
most fundemental of them is that to create a block you need to update
the state of the UTXO set, and the way Bitcoin is designed means that
updating that state requires bandwidth equal to all the transaction
volume to keep up with the changes to what set. Long story short, we get
O(n^2) scaling, which is just plain infeasible.
So let's split up the transaction volume so every individual miner only
needs to keep up with some portion. In a rough sense that's what
alt-coins do - all the tipping microtransactions on Doge never have to
hit the Bitcoin blockchain for instance, reducing pressure on the
latter. But moving value between chains is inconvenient; right now
moving value requires trusted third parties. Two-way atomic chain
transfers does help here, but as recent discussions on the topic showed
there's all sorts of edge cases with reorganizations that are tricky to
handle; at worst they could lead to inflation.
So what's the underlying issue there? The chains are too independent.
Even with merge-mining there's no real link between one chain and
another with regard to the order of transactions. Secondly merge-mining
suffers from 51% attacks if the chain being merge-mined doesn't have a
majority of total hashing power... which kinda defeats the point if
we're worried about miner scalability.
2 Blocks and the TXO set as a binary radix tree
=============================================So how can we do better? Start with the "big picture" idea and take the
linear blockchain and turn it into a tree:
Obviously if we could somehow split up the UTXO set such that individual
miners/full nodes only had to deal with subsets of this tree we could
significantly reduce the bandwidth that any one miner would need to
process. Every transaction output would get a unique identifier, say
txoutid=H(txout) and we put those outputs in blocks appropriately.
We can't just wave a magic wand and say that every block has the above
structure and all miners co-ordinate to generate all blocks in one go.
Instead we'll do something akin to merge mining. Start with a linear
blockchain with ten blocks. Arrows indicate hashing:
a0 ⇽ a1 ⇽ a2 ⇽ a3 ⇽ a4 ⇽ a5 ⇽ a6 ⇽ a7 ⇽ a8 ⇽ a9
The following data structure could be the block header in this scheme.
We'll simplify things a bit and make up our own; obviously with some
more effort the standard Satoshi structures can be used too:
struct BlockHeader:
uint256 prevBlockHash
uint256 blockContentsHash
uint256 target
uint256 nonce
uint time
For now we'll say this is a pure-proof-of-publication chain, so our
block contents are very simple:
struct BlockContents:
uint256 merkleRoot
As usual the PoW is valid if H(blockHeader) < blockHeader.target. Every
block creates new txouts, and the union of all such txouts is the txout
set. As shown previously(1) this basic proof-of-publication
functionality is sufficient to build a crypto-currency even without
actually validating the contents of the so-called transaction outputs.
The scalability of this sucks, so let's add two more chains below the
root to start forming a tree. For fairness we'll only allow miners to
either mine a, a+b, or a+c; attempting to mine a block with both the b
and c chains simultaneously is not allowed.
struct BlockContents:
uint256 childBlockHash # may be null
bool childSide # left or right
uint256 merkleRoot
Furthermore we shard the TXO space by defining txoid = H(txout) and
allowing any txout in chain a, and only txouts with LSB=0 in b, LSB=1 in
c; the beginning of a binary radix tree. With some variance thrown in we
get the following:
We now have three different versions of the TXO set: ∑a, ∑a + ∑b, and
∑a+∑c. Each of these versions is consistent in that for a given txoutid
prefix we can achieve consensus over the contents of the TXO set. Of
course, this definition is recursive:
Unicode unfortunately lacks 3D box drawing at present, so I've only
shown left-sided child chains.
3 Herding the child-chains
========================
If all we were doing was publishing data, this would suffice. But what
if we want to syncronize our actions? For instance, we may want a new
txout to only be published in one chain if the corresponding txout in
another is marked spent. What we want is a reasonable rule for
child-chains to be invalidated when their parents are invalidated so as
to co-ordinate actions across distant child chains by relying on the
existance of their parents.
We start by removing the per-chain difficulties, leaving only a single
master proof-of-work target. Solutions less than target itself are
considered valid in the root chain, less than the target << 1 in the
root's children, << 2 in the children's children etc. In children that
means the header no longer contains a time, nonce, or target; the values
in the root block header are used instead:
struct ChildBlockHeader:
uint256 prevChildBlockHash
uint256 blockContentsHash
For a given chain we always choose the one with the most total work. But
to get our ordering primitive we'll add a second, somewhat brutal, rule:
Parent always wins.
We achieve this moving the child block header into the parent block
itself:
struct BlockContents:
ChildBlockHeader childHeader # may be null (zeroed out)
bool childSide # left or right
bytes txout
Let's look at how this works. We start with a parent and a child chain:
to
This behavior is easier to understand if you say instead that the node
learned about block b2', which had more total work than b2 as the sum
total of work done in the parent chain in blocks specifying the that
particular child chain is considered before comparing the total work
done in only the child chain.
It's important to remember that the parent blockchain has and validates
both childrens' block headers; it is not possible to mine a block with
an invalid secret of child headers. For instance with the following:
I can't mine block a5 that says following b2 is b2' in an attempt to
kill off b2 through b7.
4 Token transfer with tree-chains
===============================How can we make use of this? Lets start with a simple discrete token
transfer system. Transactions are simply:
struct Transaction:
uint256 prevTxHash
script prevPubKey
script scriptSig
uint256 scriptPubKeyHash
We'll say transactions go in the tree-chain according to their
prevTxHash, with the depth in the tree equal to the depth of the
previous output. This means that you can prove an output was created by
the existance of that transaction in the block with prefix matching
H(tx.prevTxHash), and you can prove the transaction output is unspent by
the non-existance of a transaction in the block with prefix matching
H(tx).
With our above re-organization rule everything is consistent too: if
block b_i contains tx1, then the corresponding block c_j can contain a
valid tx2 spending tx1 provided that c_j depends on a_p and there is a
path from a_p to b_(i+k). Here's an example, starting with tx1 in c2:
Now that a3 exists, block c2 can only be killed if a3 is, which would
also kill b3 and thus destroy tx2.
5 Proving transaction output validity in a token transfer system
==============================================================How cheap is it to prove the entire history of a token is valid from
genesis? Perhaps surprisingly, without any cryptographic moon-math the
cost is only linear!
Remember that a transaction in a given chain has committed to the chain
that it can be spent in. If Alice is to prove to Bob that the output she
gave him is valid, she simply needs to prove that for every transaction
in the histroy of the token the token was created, remained unspent,
then finally was spent. Proving a token remained unspent between blocks
b_n and b_m is trivially possible in linear size. Once the token is
spent nothing about blocks beyond b_m is required. Even if miners do not
validate transactions at all the proof size remains linear provided
blocks themselves have a maximum size - at worst the proof contains some
invalid transactions that can be shown to be false spends.
While certainly inconvenient, it is interesting how such a simple system
appears to in theory scale to unlimited numbers of transactions and with
an appropriate exchange rate move unlimited amounts of value. A possible
model would be for the the tokens themselves to have power of two
values, and be split and combined as required.
6 The lost data problem
=====================There is however a catch: What happens when blocks get lost? Parent
blocks only contain their childrens' headers, not the block contents.
At some point the difficulty of producing a block will drop sufficiently
for malicious or accidental data loss to be possible. With the "parent
chain wins" rule it must be possible to recover from that event for
mining on the child to continue.
Concretely, suppose you have tx1 in block c2, which can be spent on
chain b. The contents of chain a is known to you, but the full contents
of chain b are unavailable:
The proof of now shows that while a3 and a4 has b-side blocks, by the
time you reach b6 those two lost blocks were in the minority. Of course
a real system needs to be careful that mining blocks and then discarding
them isn't a profitably way to create coins out of thin air - ratios
well in excess of 1:1 are likely to be required.
7 Challenge-response resolution
=============================Another idea is to say if the parent blockchain's contents are known we
can insert a challenge into it specifying that a particular child block
be published verbatim in the parent. Once the challenge is published
further parent blocks may not reference that children on that side until
either the desired block is re-republished or some timeout is reached.
If the timeout is reached, mining backtracks to some previously known
child specified in the challenge. In the typical case the block is known
to a majority of miners, and is published, essentially allowing new
miners to force the existing ones to "cough up" blocks they aren't
publishing and allow the new ones to continue mining. (obviously some
care needs to be taken with regard to incentives here)
While an attractive idea, this is our first foray into moon math.
Suppose such a challenge was issued in block a2, asking for the contents
of b1 to be published. Meanwhile tx1 is created in block c3, and can
only be spent on a b-side chain:
A proof of tx2 as valid payment would entirely miss fact that the
challenge was published and thus not know that b1' was invalid. While
I'm sure the reader can come up with all kinds of complex and fragile
way of proving fraud to cause chain a to be somehow re-organized, what
we really want is some sub-linear proof of honest computation. Without
getting into details, this is probably possible via some flavor of
sub-linear moon-math proof-of-execution. But this paper is too long
already to start getting snarky.
8 Beyond token transfer systems
=============================We can extend our simple one txin, one txout token transfer transactions
with merkle (sum) trees. Here's a rough sketch of the concept:
Where previously a transaction committed to a specific transaction
output, we can make our transactions commit to a merkle-sum-tree of
transaction outputs. To then redeem a transaction output you prove that
enough prior outputs were spend to add up to the new output's value. The
entire process can happen incrementally without any specific
co-operation between miners on different parts of the chain, and inputs
and outputs can come from any depth in the tree provided that care is
taken to ensure that reorganization is not profitable.
Like the token transfer system proving a given output is valid has cost
linear with history. However we can improve on that using
non-interactive proof techniques. For instance in the linear token
transfer example the history only needs to be proven to a point where
the transaction fees are higher than the value of the output. (easiest
where the work required to spend a txout of a given value is well
defined) A similar approach can be easily taken with the
directed-acyclic-graph of mutliple-input-output transactions. Secondly
non-interactive proof techniques can also be used, again out of the
scope of this already long preliminary paper.
1) "Disentangling Crypto-Coin Mining: Timestamping,
Proof-of-Publication, and Validation",http://www.mail-archive.com/bitcoin-development%40lists.sourceforge.net/msg03307.html 
