[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 18.

bigstinker85

newbie

Activity: 34

Merit: 0

Quote from: The Frisian on August 16, 2019, 07:06:07 AM

It takes 150 confirmations on tradesatoshi to make my XMG available for trading.
That's insane.

But better then Yobit, never trade on Yobit.
Your coins get lost in a forked chain.

Only use tradesatoshi or nova exchange (not for US, i believe)
I don't know other exchanges for XMG.

they both are not for US but i still trade on them. it's not hard to mask your IP to say i live in EUROPE =]

so anybody on here has experience mining magi with raspberry pi??? looking to find out if there any new updated cpuminer for them....

The Frisian

legendary

Activity: 1019

Merit: 1003

Senior Developer and founder of ViMeAv ICT

It takes 150 confirmations on tradesatoshi to make my XMG available for trading.
That's insane.

But better then Yobit, never trade on Yobit.
Your coins get lost in a forked chain.

Only use tradesatoshi or nova exchange (not for US, i believe)
I don't know other exchanges for XMG.

bigstinker85

newbie

Activity: 34

Merit: 0

Quote from: MostlyGhostly on August 14, 2019, 07:18:38 AM

Quote from: bigstinker85 on August 09, 2019, 02:36:10 PM

Quote from: The Frisian on August 09, 2019, 02:01:09 PM

Quote from: bigstinker85 on August 09, 2019, 01:22:31 PM

Quote from: The Frisian on August 09, 2019, 06:00:48 AM

Quote from: Iame3 on August 09, 2019, 05:44:16 AM

50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.

Right, but use coin control to make one block.

so i have one block set with 91 coins and the confirmation is at 701

than i received a transaction in middle of the night at some point from coinmagi pool.... confirmation at 202

and my wallet says not staking still....... is that because of the new incoming transaction from auto payment???

Just wait a little bit longer, I guess.
My blocks start staking from 1500 - 2000 confirmations.

i made a new transaction to myself to put all the coins into one block and test.........

i am curious do i manually have to keep transferring coins to myself after they stake? i want to setup a pi zero to run 24/7 and just have it stake.

my example would be like have a fresh wallet on pi zero w and keep it staking and every week transfer coins to it from my pc when i trade off the BTC to XMG on tradesoatoshi. since it been taking me weeks to trade my BTC to XMG.

been looking at the staking on the https://chainz.cryptoid.info/xmg/address.dws?9MDFWb9rGPaH3ZFR9j9goJHpVFa6ctnGWm.htm to see what people are getting for staking and it seems like a tiny amount but its worth it for having coins sit in my wallet doing nothing any ways.

Try the network, inhale its breath. Give it a shot. Transaction u made was banished from the blockchain, now all validators are advised to add the transcript of the transaction to their black lists as a gesture of organized solidarity against the malevolent action which is flagged by all nodes as a source of peril danger. I came here to testify that this time u succeeded with what u did to compromise the network. This was the first and the last time.

what you talking about being black lists? Huh

??

MostlyGhostly

full member

Activity: 398

Merit: 110

Quote from: bigstinker85 on August 09, 2019, 02:36:10 PM

Quote from: The Frisian on August 09, 2019, 02:01:09 PM

Quote from: bigstinker85 on August 09, 2019, 01:22:31 PM

Quote from: The Frisian on August 09, 2019, 06:00:48 AM

Quote from: Iame3 on August 09, 2019, 05:44:16 AM

50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.

Right, but use coin control to make one block.

so i have one block set with 91 coins and the confirmation is at 701

than i received a transaction in middle of the night at some point from coinmagi pool.... confirmation at 202

and my wallet says not staking still....... is that because of the new incoming transaction from auto payment???

Just wait a little bit longer, I guess.
My blocks start staking from 1500 - 2000 confirmations.

i made a new transaction to myself to put all the coins into one block and test.........

i am curious do i manually have to keep transferring coins to myself after they stake? i want to setup a pi zero to run 24/7 and just have it stake.

my example would be like have a fresh wallet on pi zero w and keep it staking and every week transfer coins to it from my pc when i trade off the BTC to XMG on tradesoatoshi. since it been taking me weeks to trade my BTC to XMG.

been looking at the staking on the https://chainz.cryptoid.info/xmg/address.dws?9MDFWb9rGPaH3ZFR9j9goJHpVFa6ctnGWm.htm to see what people are getting for staking and it seems like a tiny amount but its worth it for having coins sit in my wallet doing nothing any ways.

Try the network, inhale its breath. Give it a shot. Transaction u made was banished from the blockchain, now all validators are advised to add the transcript of the transaction to their black lists as a gesture of organized solidarity against the malevolent action which is flagged by all nodes as a source of peril danger. I came here to testify that this time u succeeded with what u did to compromise the network. This was the first and the last time.

The Frisian

legendary

Activity: 1019

Merit: 1003

Senior Developer and founder of ViMeAv ICT

Quote from: bigstinker85 on August 13, 2019, 07:01:46 PM

so you dump all your coins into a address for staking..... so does it automatically split the coins into blocks on it own or do you have to manually send to yourself??? so the second value put blocks into 250 if if under the "confirmation amount" for the proper weight to start staking?
looks like you have it setup to blocks of 500 if meets threshold and 250 if under threshold..... am i right?

Yes, I dump all my coins into one address and use coin control (settings - options - display , check display coin control features)
to create a few blocks (from 500 til 1000)
stakesplitthreshold=500 means split block after staking when bigger than 500 in two equal parts
stakecombinethreshold=250 means combines two blocks after staking when blocksize smaller than 250
This is just an example.

bigstinker85

newbie

Activity: 34

Merit: 0

Quote from: The Frisian on August 13, 2019, 02:30:53 PM

Quote from: bigstinker85 on August 13, 2019, 02:14:21 PM

is their a setting to change to allow me to split the exact amount of coins to stake???
thanks,
mike

You can use coin control (gui) , or stakesplitthreshold/stakecombinethreshold (magi.conf)

# Transaction under stake with a value greater than the threshold is being splitted (500, 1000, 5000)
stakesplitthreshold=500

# Transactions with values less than the threshold will combine into one (250, 1500)
stakecombinethreshold=250

I use only one address for staking and put all my coins in that address.
Then with coin control i split my coins in blocks.
With your amount of coins i would put them in one block.

so you dump all your coins into a address for staking..... so does it automatically split the coins into blocks on it own or do you have to manually send to yourself??? so the second value put blocks into 250 if if under the "confirmation amount" for the proper weight to start staking?

looks like you have it setup to blocks of 500 if meets threshold and 250 if under threshold..... am i right?

The Frisian

legendary

Activity: 1019

Merit: 1003

Senior Developer and founder of ViMeAv ICT

Quote from: bigstinker85 on August 13, 2019, 02:14:21 PM

is their a setting to change to allow me to split the exact amount of coins to stake???
thanks,
mike

You can use coin control (gui) , or stakesplitthreshold/stakecombinethreshold (magi.conf)

# Transaction under stake with a value greater than the threshold is being splitted (500, 1000, 5000)
stakesplitthreshold=500

# Transactions with values less than the threshold will combine into one (250, 1500)
stakecombinethreshold=250

I use only one address for staking and put all my coins in that address.
Then with coin control i split my coins in blocks.
With your amount of coins i would put them in one block.

bigstinker85

newbie

Activity: 34

Merit: 0

Quote from: bigstinker85 on August 13, 2019, 01:39:00 PM

how can you setup your wallet to have multiple amounts staking at a time?

noticed on https://chainz.cryptoid.info/xmg/#!network some people have their wallet setup at a 15-25min interval of PoS going on like 350+ per stake.

im curious if i can do 175 coins at a time buy have two generating.

for me i keep getting 257 coins only to stake and the 120 coins just sit there collecting weight not staking. got to 2287 confirmations and it never went to the PoS part like the 257 coins did, but on the bottom right of the wallet it kept telling me "staking generate rewards 22hrs
" never changed time and i assume it meant that time for the 257 coin block.

what i did now was transfer all 357 coins to myself into one block in hopes that would stake that entire amount.

is their a setting to change to allow me to split the exact amount of coins to stake???

thanks,
mike

https://chainz.cryptoid.info/xmg/address.dws?829145.htm <----- that's the address i was looking at encase you need to see what i am talking about

bigstinker85

newbie

Activity: 34

Merit: 0

how can you setup your wallet to have multiple amounts staking at a time?

noticed on https://chainz.cryptoid.info/xmg/#!network some people have their wallet setup at a 15-25min interval of PoS going on like 350+ per stake.

im curious if i can do 175 coins at a time buy have two generating.

for me i keep getting 257 coins only to stake and the 120 coins just sit there collecting weight not staking. got to 2287 confirmations and it never went to the PoS part like the 257 coins did, but on the bottom right of the wallet it kept telling me "staking generate rewards 22hrs
" never changed time and i assume it meant that time for the 257 coin block.

what i did now was transfer all 357 coins to myself into one block in hopes that would stake that entire amount.

is their a setting to change to allow me to split the exact amount of coins to stake???

thanks,
mike

bigstinker85

newbie

Activity: 34

Merit: 0

so i have noticed that my staking only works on one block when i have two separate addresses for staking labeled as follows:
staking
staking 2

this is done so i can have coins availlable between staking since i noticed it takes 1800+ confirmation before it goes into staking transaction. but staking 2 never leaves. is it because i am only allowed to stake once at a time? Huh

any information would help due to the fact i always need 100-150 coins available for trading on satoshi trade, its crazy i doubled my magi coin in less than 24hrs due to people trying to quick sell =]

crypto_curious

full member

Activity: 933

Merit: 175

Nevermind, this is sorted. I withdrew another 38 coins from mining pool and I am finally staking!

Conclusion: 54 XMG is not enough weight to start mining nowadays, you need to have more than that.

crypto_curious

full member

Activity: 933

Merit: 175

Hi guys, quick question:

I have 54 XMG, but my wallet says I don't have enough weight to start stake. Few post earlier, I can read that even 20-30 coins is enough to start.

https://imgur.com/a/xHmEj1h

I am using latest wallet version on Linux, v1.4.6.2.

What am I missing?

Also, I noticed this: https://imgur.com/a/NRP7nMV

Current number of blocks is higher than Estimated total blocks.

bigstinker85

newbie

Activity: 34

Merit: 0

Quote from: The Frisian on August 09, 2019, 02:01:09 PM

Quote from: bigstinker85 on August 09, 2019, 01:22:31 PM

Quote from: The Frisian on August 09, 2019, 06:00:48 AM

Quote from: Iame3 on August 09, 2019, 05:44:16 AM

50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.

Right, but use coin control to make one block.

so i have one block set with 91 coins and the confirmation is at 701

than i received a transaction in middle of the night at some point from coinmagi pool.... confirmation at 202

and my wallet says not staking still....... is that because of the new incoming transaction from auto payment???

Just wait a little bit longer, I guess.
My blocks start staking from 1500 - 2000 confirmations.

i made a new transaction to myself to put all the coins into one block and test.........

i am curious do i manually have to keep transferring coins to myself after they stake? i want to setup a pi zero to run 24/7 and just have it stake.

my example would be like have a fresh wallet on pi zero w and keep it staking and every week transfer coins to it from my pc when i trade off the BTC to XMG on tradesoatoshi. since it been taking me weeks to trade my BTC to XMG.

been looking at the staking on the https://chainz.cryptoid.info/xmg/address.dws?9MDFWb9rGPaH3ZFR9j9goJHpVFa6ctnGWm.htm to see what people are getting for staking and it seems like a tiny amount but its worth it for having coins sit in my wallet doing nothing any ways.

The Frisian

legendary

Activity: 1019

Merit: 1003

Senior Developer and founder of ViMeAv ICT

Quote from: bigstinker85 on August 09, 2019, 01:22:31 PM

Quote from: The Frisian on August 09, 2019, 06:00:48 AM

Quote from: Iame3 on August 09, 2019, 05:44:16 AM

50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.

Right, but use coin control to make one block.

so i have one block set with 91 coins and the confirmation is at 701

than i received a transaction in middle of the night at some point from coinmagi pool.... confirmation at 202

and my wallet says not staking still....... is that because of the new incoming transaction from auto payment???

Just wait a little bit longer, I guess.
My blocks start staking from 1500 - 2000 confirmations.

bigstinker85

newbie

Activity: 34

Merit: 0

Quote from: The Frisian on August 09, 2019, 06:00:48 AM

Quote from: Iame3 on August 09, 2019, 05:44:16 AM

50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.

Right, but use coin control to make one block.

so i have one block set with 91 coins and the confirmation is at 701

than i received a transaction in middle of the night at some point from coinmagi pool.... confirmation at 202

and my wallet says not staking still....... is that because of the new incoming transaction from auto payment???

The Frisian

legendary

Activity: 1019

Merit: 1003

Senior Developer and founder of ViMeAv ICT

Quote from: Iame3 on August 09, 2019, 05:44:16 AM

50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.

Right, but use coin control to make one block.

Iame3

newbie

Activity: 102

Merit: 0

Quote from: bigstinker85 on August 09, 2019, 01:19:33 AM

hey i am 3 coins short to making the 50. if anybody like to donate some so i can learn how to stake and see what it's all about my wallet address is:

9FwLwbUYtKUQY86wKQ6gUYByp8yoXTfmzY

waiting on my trades from satoshitrade to go through so i can get more coins to stake but it seems like nobody selling their XMG for my BTC =[ =[ Sad

thanks in advance, this is a learning process for me and im starting to look at other CPU coins but that DOGE is way out of the realm of using a pi cluster. have no idea how these people are mining such high hash rates but going to give a i7 gen 2 a shot and see how much more it is over my pi cluster (currently at 3 and ordered 4 more) Grin

`bigstinker

50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.

bigstinker85

newbie

Activity: 34

Merit: 0

hey i am 3 coins short to making the 50. if anybody like to donate some so i can learn how to stake and see what it's all about my wallet address is:

9FwLwbUYtKUQY86wKQ6gUYByp8yoXTfmzY

waiting on my trades from satoshitrade to go through so i can get more coins to stake but it seems like nobody selling their XMG for my BTC =[ =[ Sad

thanks in advance, this is a learning process for me and im starting to look at other CPU coins but that DOGE is way out of the realm of using a pi cluster. have no idea how these people are mining such high hash rates but going to give a i7 gen 2 a shot and see how much more it is over my pi cluster (currently at 3 and ordered 4 more) Grin

`bigstinker

starmman

legendary

Activity: 1484

Merit: 1029

Quote from: bigstinker85 on August 07, 2019, 06:52:27 PM

having trouble changing my gui setting from mXMG to XMG in the wallet. tried everything in settings on the GUI and it won't keep it at XMG... any suggestions?

Don't have a wallet open right now. so can't directly hepl - but I remember that there was a drop down in the settings to change it

bigstinker85

newbie

Activity: 34

Merit: 0

having trouble changing my gui setting from mXMG to XMG in the wallet. tried everything in settings on the GUI and it won't keep it at XMG... any suggestions?

Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 18. (Read 2375711 times)