That's hanging on the block and that's it! -> http://prntscr.com/gcrpq3
Try restarting the wallet.
Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 413. (Read 2375972 times)
Try restarting the wallet.
I've resynced https://poolinfo.systms.org and it's now up to date with the official chain.
Hi.
When i try to enable "Mint" in the m-wallet, the app get a windows error and get closed. i want to solo mining, so when i delete "daemon=1" in magi.conf, the m-wallet do not get any errors when enabling "Mint".
Can i do solo mining without "daemon=1" in magi.conf?
Sorry about my english.
What does the error message say?
"The program has a problem and is goin to close" look´s like a windows problem. I tested in other version of windows, and is working fine so far. The problem is in windows 10 64bits.
I couldn't get the staking to work on 64 bit until I reloaded the with the magic.conf
Code:
rpcuser=rpcuser
rpcpassword=rpcpass
rpcport=8232
rpcallowip=127.0.0.1
listen=0
connect=104.128.225.215
staking=1
posii=1
All seems to be working now, but it seems that coin age was reset. I have 3 stakes so far with 1829.5 XMG being currently staked for a total reward of 0.0023 XMG. I hope this version and the chain are stable now.
Should be ok now.
Have changed pool from NOMP to MPOS... as people didn't like NOMP's look.
Shares and blocks will be paid out as they're still accepted.
If people want, it's changed to http://h2701744.stratoserver.net/
Will need to setup rest, but will be done once chain is up.
Once again, feel free to use, but no hard guarantees mining will work at this point due to chain issues.
Edward
Shares and blocks will be paid out as they're still accepted.
If people want, it's changed to http://h2701744.stratoserver.net/
Will need to setup rest, but will be done once chain is up.
Once again, feel free to use, but no hard guarantees mining will work at this point due to chain issues.
Edward
Nice work man!
I'd be interested in using your pool. Won't mine until we get more information from dev.
Have decided to move it back to NOMP, and adjust layout to show work done by miner etc.
link is still: http://h2701744.stratoserver.net:85
Pool is up and running on main chain as per Joe's posts.
Feel free to use, and allow some time to adjust layout.
Thanks,
Edward
Great!
I do get the following message though (appears after +/- 12 shares)
[2017-08-25 09:18:47] stratum_recv_line failed
[2017-08-25 09:18:47] Stratum connection interrupted
And about 40% of those that do succeed give me (booooo)
Wallet v1.4.3:
Windows: http://coinmagi.org/bin/m-wallet-1.4.3/m-wallet-1.4.3-win.zip
Linux (32 & 64): http://coinmagi.org/bin/m-wallet-1.4.3/m-wallet-1.4.3-linux.tar.gz
OS X: http://coinmagi.org/bin/m-wallet-1.4.3/m-wallet-1.4.3-osx.zip
Github: https://github.com/magi-project/magi
magi.conf:
Blockchain download (#1451225):
http://coinmagi.org/bin/block-chain/
Solo mining:
http://m-core.org/solo-mine-magi/
[Edit]
PoW Block reward: 30% of normal value for temporary and back to normal after the fix is fully done
PoS rewards: 20% more also temporarily and back to normal after the fix is fully done
This is the latest version. Well done JoeWindows: http://coinmagi.org/bin/m-wallet-1.4.3/m-wallet-1.4.3-win.zip
Linux (32 & 64): http://coinmagi.org/bin/m-wallet-1.4.3/m-wallet-1.4.3-linux.tar.gz
OS X: http://coinmagi.org/bin/m-wallet-1.4.3/m-wallet-1.4.3-osx.zip
Github: https://github.com/magi-project/magi
magi.conf:
Code:
rpcuser=rpcuser
rpcpassword=rpcpass
rpcport=8232
rpcallowip=127.0.0.1
listen=0
connect=104.128.225.215
Blockchain download (#1451225):
http://coinmagi.org/bin/block-chain/
Solo mining:
http://m-core.org/solo-mine-magi/
[Edit]
PoW Block reward: 30% of normal value for temporary and back to normal after the fix is fully done
PoS rewards: 20% more also temporarily and back to normal after the fix is fully done
Have changed pool from NOMP to MPOS... as people didn't like NOMP's look.
Shares and blocks will be paid out as they're still accepted.
If people want, it's changed to http://h2701744.stratoserver.net/
Will need to setup rest, but will be done once chain is up.
Once again, feel free to use, but no hard guarantees mining will work at this point due to chain issues.
Edward
Shares and blocks will be paid out as they're still accepted.
If people want, it's changed to http://h2701744.stratoserver.net/
Will need to setup rest, but will be done once chain is up.
Once again, feel free to use, but no hard guarantees mining will work at this point due to chain issues.
Edward
Nice work man!
I'd be interested in using your pool. Won't mine until we get more information from dev.
Have decided to move it back to NOMP, and adjust layout to show work done by miner etc.
link is still: http://h2701744.stratoserver.net:85
Pool is up and running on main chain as per Joe's posts.
Feel free to use, and allow some time to adjust layout.
Thanks,
Edward
is there a Magi Blockchain Explorer?
still cant get the wallet connected with listen disabled. But oh well everyone is opening pools when Joe specifically asked just to solo mine...
go to the console and type in checkwallet. if errors appear then hit repairwallet. Mine didnt start staking until I did that.
The Wallet 1.4.3.0 works perfectly for me.
Everything is again up-to-date and mining is running again.
Everything seems fine
Very good work joe
Everything is again up-to-date and mining is running again.
Everything seems fine
Very good work joe
"The program has a problem and is goin to close" look´s like a windows problem. I tested in other version of windows, and is working fine so far. The problem is in windows 10 64bits.
Windows 10 64bit here. Works perfectly. Just followed the instructions provided step by step before starting the wallet. Minting also works. Checking to see if I'm synchronized with the main chain and no issues so far.
Good job, Magi is back!
i found the problem. I just have to run the m-wallet as Administrator.
Thank you all!!!
i found the problem. I just have to run the m-wallet as Administrator.
Thank you all!!!
Good to hear you fixed it - win10 security is much tighter than previous versions of windows, so makes sense Thank you all!!!
I've resynced https://poolinfo.systms.org and it's now up to date with the official chain.
Hi.
When i try to enable "Mint" in the m-wallet, the app get a windows error and get closed. i want to solo mining, so when i delete "daemon=1" in magi.conf, the m-wallet do not get any errors when enabling "Mint".
Can i do solo mining without "daemon=1" in magi.conf?
Sorry about my english.
What does the error message say?
"The program has a problem and is goin to close" look´s like a windows problem. I tested in other version of windows, and is working fine so far. The problem is in windows 10 64bits.
i found the problem. I just have to run the m-wallet as Administrator.
Thank you all!!!
"The program has a problem and is goin to close" look´s like a windows problem. I tested in other version of windows, and is working fine so far. The problem is in windows 10 64bits.
Windows 10 64bit here. Works perfectly. Just followed the instructions provided step by step before starting the wallet. Minting also works. Checking to see if I'm synchronized with the main chain and no issues so far.
Good job, Magi is back!
I've resynced https://poolinfo.systms.org and it's now up to date with the official chain.
Hi.
When i try to enable "Mint" in the m-wallet, the app get a windows error and get closed. i want to solo mining, so when i delete "daemon=1" in magi.conf, the m-wallet do not get any errors when enabling "Mint".
Can i do solo mining without "daemon=1" in magi.conf?
Sorry about my english.
What does the error message say?
"The program has a problem and is goin to close" look´s like a windows problem. I tested in other version of windows, and is working fine so far. The problem is in windows 10 64bits.
I've resynced https://poolinfo.systms.org and it's now up to date with the official chain.
Hi.
When i try to enable "Mint" in the m-wallet, the app get a windows error and get closed. i want to solo mining, so when i delete "daemon=1" in magi.conf, the m-wallet do not get any errors when enabling "Mint".
Can i do solo mining without "daemon=1" in magi.conf?
Sorry about my english.
What does the error message say?
"The program has a problem and is goin to close" look´s like a windows problem. I tested in other version of windows, and is working fine so far. The problem is in windows 10 64bits.
still cant get the wallet connected with listen disabled. But oh well everyone is opening pools when Joe specifically asked just to solo mine...
I've resynced https://poolinfo.systms.org and it's now up to date with the official chain.
Hi.
When i try to enable "Mint" in the m-wallet, the app get a windows error and get closed. i want to solo mining, so when i delete "daemon=1" in magi.conf, the m-wallet do not get any errors when enabling "Mint".
Can i do solo mining without "daemon=1" in magi.conf?
Sorry about my english.
What does the error message say?
I've resynced https://poolinfo.systms.org and it's now up to date with the official chain.
Hi.
When i try to enable "Mint" in the m-wallet, the app get a windows error and get closed. i want to solo mining, so when i delete "daemon=1" in magi.conf, the m-wallet do not get any errors when enabling "Mint".
Can i do solo mining without "daemon=1" in magi.conf?
Sorry about my english.
I had a question! Why is the purse on the block 1451235! And do not sync?
I've resynced https://poolinfo.systms.org and it's now up to date with the official chain.
Jump to: