[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 584.

jediwashuu

newbie

Activity: 20

Merit: 0

its immediate. I type in the command listed, and that is the response.

Quote from: joelao95 on February 05, 2017, 12:21:19 AM

Quote from: jediwashuu on February 03, 2017, 09:43:48 PM

i run ./magidstart, the error i get is just: "error: couldn't connect to server"
i tried adding some of the network addresses, but that didnt help.

Quote

What exact error? Let it run for a while, it should find some nodes after a minute or two.

You can also add some nodes from here: https://chainz.cryptoid.info/xmg/#!network

Did the error immediately come up after launching, or after issuing a command like getinfo?

starmman

legendary

Activity: 1484

Merit: 1029

Quote from: dbstmddhks on February 05, 2017, 11:27:14 PM

Is there any white papers about magi?

The pages of official sites about resource - documention didn't work.

Could you help me?

From wan.

I had a copy downloaded on my PC I've taken a look but can't find it any more - I'll have a deeper look when I get home - Otherwise, I'm sure Joe will have a link.

dbstmddhks

sr. member

Activity: 523

Merit: 250

Is there any white papers about magi?

The pages of official sites about resource - documention didn't work.

Could you help me?

From wan.

joelao95

legendary

Activity: 1190

Merit: 1009

Coin of the Magi!

I have been finishing up all of the stuffs, and settled down Qt and daemon compiling across a couple of OSs. I should be able to get them out by tomorrow. I'm quite satisfied with how the Qt looks like and behaves in general at this moment, though this won't be the most important feature we might talk about. The v1.3.1 would run quite smoothly compared to any prior versions; I've let it staying on my Mac all day long. On top of this release, we'll get back to the to-do-list. That was talked long time ago if one can recall, but definitely a solid plan we'll proceed with. This coming release is just a part of the list...

Vin

legendary

Activity: 1166

Merit: 1015

Quote from: ?? on ??

having trouble staking currently says dont have enough weight , does tis have to do with coinage?

Exactly.
Just wait (and unlock wallet for staking).

starmman

legendary

Activity: 1484

Merit: 1029

Quote from: ?? on ??

i been in ioc since 20k market cap now 7mil and its small so hodl dev n market away. good times ahead

Indeed, 200k is a good milestone for Magi if it can hold 200k for a few weeks, then its another step forward. For comparison, in Feb 2016 the market cap of Magi was 28k, so its done pretty well in the last 12 months - if that performance keeps up and we get a bit more press we could be looking at a cap of $1m+ by next year - but I don't like to speculate too much Wink

111magic

legendary

Activity: 1750

Merit: 1005

Quote from: starmman on February 05, 2017, 06:51:09 AM

Quote from: 111magic on February 05, 2017, 05:09:32 AM

Looks like a good day for Magi!

Yes, I've been on the exchanges this morning - its been quite a busy one, market cap and price are rising very nicely - the market cap has hit $200k again (for only the 3rd time) today

Wow really. I did not checked that one.
Do you use this one also?
https://www.coingecko.com/en/coins/magi

Its a nice infopage. But think its not current

starmman

legendary

Activity: 1484

Merit: 1029

Quote from: 111magic on February 05, 2017, 05:09:32 AM

Looks like a good day for Magi!

Yes, I've been on the exchanges this morning - its been quite a busy one, market cap and price are rising very nicely - the market cap has hit $200k again (for only the 3rd time) today

111magic

legendary

Activity: 1750

Merit: 1005

Looks like a good day for Magi!

joelao95

legendary

Activity: 1190

Merit: 1009

Coin of the Magi!

Quote from: jediwashuu on February 03, 2017, 09:43:48 PM

i run ./magidstart, the error i get is just: "error: couldn't connect to server"
i tried adding some of the network addresses, but that didnt help.

Quote

What exact error? Let it run for a while, it should find some nodes after a minute or two.

You can also add some nodes from here: https://chainz.cryptoid.info/xmg/#!network

Did the error immediately come up after launching, or after issuing a command like getinfo?

starmman

legendary

Activity: 1484

Merit: 1029

Quote from: goldlabel on February 04, 2017, 12:25:56 PM

Quote from: starmman on February 04, 2017, 12:01:01 PM

Quote from: ?? on ??

Oke then i will say it, DONT do it its just another SCAM.

For some reason, not sure why, I never like to say that directly =) Think I got accused of FUD once or twice LOL

They can try Grin

This person has been spamming so many coins on this forum that I doubt they would even notice.

goldlabel

hero member

Activity: 575

Merit: 502

Quote from: starmman on February 04, 2017, 12:01:01 PM

Quote from: ?? on ??

Oke then i will say it, DONT do it its just another SCAM.

For some reason, not sure why, I never like to say that directly =) Think I got accused of FUD once or twice LOL

They can try Grin

starmman

legendary

Activity: 1484

Merit: 1029

Quote from: ?? on ??

Oke then i will say it, DONT do it its just another SCAM.

For some reason, not sure why, I never like to say that directly =) Think I got accused of FUD once or twice LOL

starmman

legendary

Activity: 1484

Merit: 1029

Quote from: ?? on ??

im starting love magi, still syncing the chain

Try the following link - you can download the entire chain (or at least a very good chunk of it) and get a head start =)

http://coinmagi.org/bin/block-chain/

Also, check the OP for nodes to add to your magi.conf to help sync to more nodes on the network if you don't have enough...

111magic

legendary

Activity: 1750

Merit: 1005

Quote from: Vin on February 03, 2017, 10:40:50 PM

I ~~like~~ love MAGI

I also love Magi!

Vin

legendary

Activity: 1166

Merit: 1015

I ~~like~~ love MAGI

jediwashuu

newbie

Activity: 20

Merit: 0

i run ./magidstart, the error i get is just: "error: couldn't connect to server"
i tried adding some of the network addresses, but that didnt help.

Quote

What exact error? Let it run for a while, it should find some nodes after a minute or two.

You can also add some nodes from here: https://chainz.cryptoid.info/xmg/#!network

eule

hero member

Activity: 756

Merit: 501

Quote from: jediwashuu on February 03, 2017, 05:54:47 PM

slowly i think i get closer... linux is not my area Cheesy

running the start command as listed gives me an error to set the rpcpassword in the magi.conf file. that file did not exist where it said, so i created it and set that field. now i get "couldn't connect to server". i did some digging, and turned up a magi.conf file with additional settings
rpcport=8232
server=1
listen=1

rpcuser=rpcuser
rpcpassword=rpcpass
rpcallowip=127.0.0.1
addnode=104.128.225.215
addnode=104.131.42.100

but that did not fix my couldnt connect error.

again, slowly but surely...

What exact error? Let it run for a while, it should find some nodes after a minute or two.

You can also add some nodes from here: https://chainz.cryptoid.info/xmg/#!network

starmman

legendary

Activity: 1484

Merit: 1029

Quote from: joelao95 on February 02, 2017, 11:33:40 PM

Quote from: Abiky on February 01, 2017, 11:34:53 AM

The logo looks simple, yet gives a cleaner image of Coin Magi itself. I like it due to the simplicity of the same, while at the same time delivering a colorful appearance, that it is sort of eye catching.

If I were to vote for a new logo for Coin Magi, that would be the blue one. I kinda of miss the II symbol which appeared on the original logo, which helped reflect Coin Magi's unique PoS II, but even still, it looks nice.

Nevertheless, I'm looking forward for the new release of the Magi wallet, as well as more exciting stuff like the logo, to help increase Coin Magi's popularity and value. Grin

Thanks for the feedback; I'll see how it looks like by squeezing in a II.

It'll be good to see a II in there (but also fine without one) =)

Thanks for all your hard work Joe =)

jediwashuu

newbie

Activity: 20

Merit: 0

slowly i think i get closer... linux is not my area Cheesy

running the start command as listed gives me an error to set the rpcpassword in the magi.conf file. that file did not exist where it said, so i created it and set that field. now i get "couldn't connect to server". i did some digging, and turned up a magi.conf file with additional settings
rpcport=8232
server=1
listen=1

rpcuser=rpcuser
rpcpassword=rpcpass
rpcallowip=127.0.0.1
addnode=104.128.225.215
addnode=104.131.42.100

but that did not fix my couldnt connect error.

again, slowly but surely...

Quote from: eule on February 03, 2017, 08:50:23 AM

Quote from: jediwashuu on February 02, 2017, 10:31:52 PM

ok, i ran that code trying it for the Pine64. I still got the -msse2 error, so i commented that line out. the project built (it did take a while, it was running before i posted the last comment).

My problem is that nothing happens when i try to run the magid executable. no error, the program does seem to open, its not listed in task manager, etc. oh well. i may have to wait for the "official" pine64/arm build

You need to tell it to start... Wink

IIRC it should be

Code:

./magid start

Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 584. (Read 2376034 times)