Topic: [ANN] YupCoin [YUP] Pos with Masternodes and Decentralized Governance - page 12. (Read 41347 times)
December 09, 2017, 07:05:57 PM
Where is a dev? Something wrong with blockchain from yesterday. And now website and explorer is down.
December 08, 2017, 08:30:45 AM
So needless to say my question is this: What is the way to setup the masternode in the wallet on windows sytem, and I am not talking about VPS, I don't want to use a VPS or anything else thats remote. I just want to know how I can set the masternode up on my own windows system.
Please show your config files yup.conf and masternode.conf (without privkey of course). I did not have such problems with Windows wallet, but I think that something with configs.Both my conf files are now empty but before it was like this with **.. ** as blanked out info:
Also I had left it running with the empty conf files and it seems to have given me payouts of 4.49 yup a few times, so this seems to be also a POS wallet. Do I need to now send away the extras to make it exactly 10000 as before to try again for masternode?
See your inputs or just type masternode outputs command in wallet console. If you have output with 10K, you can use it. Else send this sum again.
For prevent splittings again set staking=0 for the time of setup.
December 08, 2017, 08:07:33 AM
So needless to say my question is this: What is the way to setup the masternode in the wallet on windows sytem, and I am not talking about VPS, I don't want to use a VPS or anything else thats remote. I just want to know how I can set the masternode up on my own windows system.
Please show your config files yup.conf and masternode.conf (without privkey of course). I did not have such problems with Windows wallet, but I think that something with configs.Both my conf files are now empty but before it was like this with **.. ** as blanked out info:
wallet conf file:
#----
rpcuser=**my user name**
rpcpassword=**my password**
rpcallowip=127.0.0.1
#----
listen=1
server=1
daemon=1
maxconnections=256
#--------------------
masternode=1
masternodeprivkey=**my masternode privkey gotten from masternode genkey**
externalip=**my ip address**:1237
addnode=69.180.58.29
addnode=128.68.210.180
addnode=31.132.225.0
addnode=77.2.30.196
addnode=14.164.203.3
addnode=104.229.188.243
addnode=162.211.173.18
addnode=213.55.176.212
addnode=31.148.219.41
addnode=188.113.136.160
addnode=98.234.11.108
addnode=162.211.173.18
addnode=189.75.112.86
addnode=97.98.56.138
addnode=77.2.18.205
addnode=219.111.162.87
and for the master conf file it was:
# Masternode config file
# Format: alias your_vps_IP:port masternodeprivkey collateral_output_txid collateral_output_index
# Example: mn1 127.0.0.2:1237 93HaYBVUCYjEMeeH1Y4sBGLALQZE1Yc1K64xiqgX37tGBDQL8Xg 2bcd3c84c84f87eaa86e4e56834c92927a07f9e18718810b92e0d0324456a67c 0
# mn1 **my ip address**:1237 **my masternode privkey gotten from masternode genkey** **transaction id which is also my masternode outputs** 1
Also I had left it running with the empty conf files and it seems to have given me payouts of 4.49 yup a few times, so this seems to be also a POS wallet. Do I need to now send away the extras to make it exactly 10000 as before to try again for masternode?
December 08, 2017, 05:16:52 AM
So needless to say my question is this: What is the way to setup the masternode in the wallet on windows sytem, and I am not talking about VPS, I don't want to use a VPS or anything else thats remote. I just want to know how I can set the masternode up on my own windows system.
Please show your config files yup.conf and masternode.conf (without privkey of course). I did not have such problems with Windows wallet, but I think that something with configs. December 07, 2017, 08:43:51 PM
So I bought a bit over 10000 coins at coinsmarkets to be able to setup a masternode, installed the wallet, send exactly 10000 coins to the wallet.
Tried to setup the wallet with the conf files etc
Restarted the wallet and I get an error notice:
If I chose Retry, it's second option, my system is in Dutch, I get this:
And it shuts down.
If I chose ignore then the wallet starts but stays stuck in synchronising sporks with no incoming connections:
after deleting all the info in the conf files, I ignored it and got only one connection which is the core connection. Waited it out and then re indexed all the blocks and manage to get a bugfree wallet again.
So needless to say my question is this: What is the way to setup the masternode in the wallet on windows sytem, and I am not talking about VPS, I don't want to use a VPS or anything else thats remote. I just want to know how I can set the masternode up on my own windows system.
Tried to setup the wallet with the conf files etc
Restarted the wallet and I get an error notice:
If I chose Retry, it's second option, my system is in Dutch, I get this:
And it shuts down.
If I chose ignore then the wallet starts but stays stuck in synchronising sporks with no incoming connections:
after deleting all the info in the conf files, I ignored it and got only one connection which is the core connection. Waited it out and then re indexed all the blocks and manage to get a bugfree wallet again.
So needless to say my question is this: What is the way to setup the masternode in the wallet on windows sytem, and I am not talking about VPS, I don't want to use a VPS or anything else thats remote. I just want to know how I can set the masternode up on my own windows system.
December 07, 2017, 07:42:38 PM
I think, that Dev must be more active. The community is at a loss, price fell below 100 satoshi, volume is close to zero.
What with development plans?
yes, community need DEV more active here What with development plans?
December 07, 2017, 06:33:56 PM
I think, that Dev must be more active. The community is at a loss, price fell below 100 satoshi, volume is close to zero.
What with development plans?
What with development plans?
December 07, 2017, 11:31:17 AM
I still have the greatest enthusiasm for this coin, and I'm still running my 3 masternodes. 
December 07, 2017, 04:17:39 AM
Dev keeps quiet for over a week. The coin has a future?
stun, wait for DEV please December 05, 2017, 03:44:56 AM
Dev keeps quiet for over a week. The coin has a future?
stun, wait for DEV please December 05, 2017, 01:29:38 AM
Dev keeps quiet for over a week. The coin has a future?
December 04, 2017, 09:20:53 PM
DEV ,we need new exchange market for trading , do you have any plan right now ?
December 04, 2017, 01:20:53 AM
Why do I some times stake 9.99998520 YUP? I am confused as the MN reward is 5.4 and I normally see stakes of 4.59998520 or similar.
Because you receive Stake + MN reward at the same time December 04, 2017, 12:04:02 AM
did YUP hit other exchanges right now ? there is no by wall in coinsmarkets.
I think this should require the community to push it, or who can accept this project. December 03, 2017, 10:58:34 PM
Hey Guys, just built my masternode and got to work (using the console debug, not wallet UI - mac).
But now every time I get a payout, the masternode stop working completely and I need to resend 10.000 YUP to myself and start the node again.
Any help?
Thanks.
But now every time I get a payout, the masternode stop working completely and I need to resend 10.000 YUP to myself and start the node again.
Any help?
Thanks.
December 03, 2017, 10:02:13 PM
now yup only on coinsmarket 
wait for DEV
i hope Yup can list on Coinexchange. wait for DEV
December 03, 2017, 09:53:07 PM
now yup only on coinsmarket wait for DEV
wait for DEV 
December 03, 2017, 08:19:56 AM
did YUP hit other exchanges right now ? there is no by wall in coinsmarkets.
December 03, 2017, 08:14:01 AM
Hello everyone,
My wallet does not sync itself, I just want to wallet POS, I do not want MN wallet.
where can I find the connection nodes that are posted here in Talk do not work when they are installed in config.dat.
Ask for briefing for simple POS wallet
Thank you in advance
My wallet does not sync itself, I just want to wallet POS, I do not want MN wallet.
where can I find the connection nodes that are posted here in Talk do not work when they are installed in config.dat.
Ask for briefing for simple POS wallet
Thank you in advance
you should add node to config file. and keep wallet open. maybe 2hour. i will complete sync.
December 03, 2017, 07:13:17 AM
Hello everyone,
My wallet does not sync itself, I just want to wallet POS, I do not want MN wallet.
where can I find the connection nodes that are posted here in Talk do not work when they are installed in config.dat.
Ask for briefing for simple POS wallet
Thank you in advance
My wallet does not sync itself, I just want to wallet POS, I do not want MN wallet.
where can I find the connection nodes that are posted here in Talk do not work when they are installed in config.dat.
Ask for briefing for simple POS wallet
Thank you in advance
there is no problem of my wallet , you should check your network and firewall ,also you can add node in conf file.
Jump to: