[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1005.

TheIcky

newbie

Activity: 39

Merit: 0

Quote from: mmmaybe on September 04, 2014, 03:50:15 PM

Quote from: TheIcky on September 04, 2014, 03:37:06 PM

Hey everyone, been freeing up some space over the last few days and I'm ready for some mining. However, I'm in need of some coin. Anyone mind throwing some coin my way?

BURST-GP7L-5K58-DANT-DJJTE

Thanks in advance for helping me become a part of this new community.

Sent

Thank you very much

hodlgasm

newbie

Activity: 6

Merit: 0

Quote from: burstcoin on September 04, 2014, 08:45:37 PM

Quote from: hodlgasm on September 04, 2014, 08:40:11 PM

Attempting to install miner on osx through terminal, after running sh run_dump_address.sh I get the following error:

MacBook-Pro:pocminer_v1 K$ sh run_dump_address.sh
Exception in thread "main" java.lang.UnsupportedClassVersionError: pocminer/POCMiner : Unsupported major.minor version 51.0

Could you explain what I need to do to get around this?

You need java 7.

Thanks but I already have the latest version installed, (Version 7 Update 67) so I'm still confused as to why I get this error.

Chairs

newbie

Activity: 14

Merit: 0

Quote from: burstcoin on September 04, 2014, 08:59:21 PM

Quote from: Chairs on September 04, 2014, 08:53:54 PM

Quote from: burstcoin on September 04, 2014, 08:37:02 PM

Quote from: Chairs on September 04, 2014, 08:27:47 PM

Quote from: burstcoin on September 04, 2014, 08:20:54 PM

Quote from: cad_cdn on September 04, 2014, 08:17:21 PM

anyone have a problem with a previously good working wallet and solo miner, now saying 'password does not match recipient'...nothing was changed. only 1 password ever on the pc.

If you were using a v2 pool, and want to switch back to solo, you need to set reward recip back to yourself.

Quote from: Chairs on September 04, 2014, 08:16:41 PM

Quote from: burstcoin on September 04, 2014, 08:14:21 PM

Quote from: Chairs on September 04, 2014, 07:58:56 PM

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

Follow one of the guides linked in the first post about how to generate plots, but then choose either my v2 pool or uray's pool, and follow the instructions. uray's is probably a little easier to get started at, and he has better instructions posted here. http://burst-pool.cryptoport.io/howto.html

Sent 10 coins.

Thank you, I saw that it came in. I can't even get SOLO to run correctly right now. Everything is formatted the correct files are in, but when I edit run_generate and run it, it clearly doesn't run where as the guide says that it will take a while. There is something wrong in my configuration I guess.

I have wallet up and a server running, any suggestions?

run it from a command prompt or add pause to the next line so you can see the error.

I ran it from command and the error is:

"Error ocurred during initialization of VM
Could not reserve enough space for object heap"

Is that the allocation for the blocks?

Edit -

I'm creating this on a new partitioned drive.

A - Do I need to have windows installed on this drive?

B - Do I need to change the directory of the run_generate bat file or is it just pulling files from that location?

You need to either increase the number after -Xmx or decrease your stagger size.

A: no
B: it always uses the plots folder in the miner's folder.

I'm getting so frustrated. I normally don't have problems like this.

I dropped my stagger down to 1000 and my memory stayed at 4000. Now it's saying:

"The size of the object heap + perm gen exceeds the maximum representable size."

I followed the guide to a T. It says for every 200gb = 800000 plots.

I don't get what I'm doing wrong. Someone please help. I will repay you when I actually earn some coin.

Try -Xmx1000m

Awesome! It's doing something now!

What is a good plot number for a 2.7TB drive? I want to maximize my space!

mirny

legendary

Activity: 1108

Merit: 1005

can I assign two pools to one burst address?

ltcnim

legendary

Activity: 914

Merit: 1001

Quote from: uray on September 04, 2014, 07:45:48 PM

Quote from: ltcnim on September 04, 2014, 07:40:09 PM

Quote from: uray on September 04, 2014, 07:32:41 PM

here is update for http://burst-pool.cryptoport.io

i changed minimum payout to 250 BURST since we found blocks more often right now, and to reduce tx-fee
until i can provide miners program with ability to set user minimum payout preference

and also please change your port from 80 to 8124 if you have no firewall issue

actually that port 80 is redirected to internal port 8124, so having you connect directly to 8124 will reduce server network load
only use port 80 if you can't connect to port 8124

how can I see my personal mining details on the site? I just started mining there, but it's a bit confusing (even tho it looks really cool ^^)

edit:

Code:

Submitting share
{"result":"Passphrase does not match reward recipient"}

is that because of the wallet setup (set recipient to the number from your site)? or is something wrong?

you need to wait for 4 blocks after you did reward recipient before network accept that you indeed set my pool as your payment address if you found a block

or

you are using wrong miner, are you sure you are using pool miner from my site ?

as for personal mining details, ee... ummm... what you want to see ?

ouch, I was really using the wrong miner. I compiled the one from your site and now it runs since several blocks, but nothing has been submitted so far.

crowetic

legendary

Activity: 2282

Merit: 1072

https://crowetic.com | https://qortal.org

Quote from: hodlgasm on September 04, 2014, 08:40:11 PM

Attempting to install miner on osx through terminal, after running sh run_dump_address.sh I get the following error:

MacBook-Pro:pocminer_v1 K$ sh run_dump_address.sh
Exception in thread "main" java.lang.UnsupportedClassVersionError: pocminer/POCMiner : Unsupported major.minor version 51.0

Could you explain what I need to do to get around this?

Just a guess here, but try updating your java, install the JRE. just search JRE download in google, first result.

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: Chairs on September 04, 2014, 08:53:54 PM

Quote from: burstcoin on September 04, 2014, 08:37:02 PM

Quote from: Chairs on September 04, 2014, 08:27:47 PM

Quote from: burstcoin on September 04, 2014, 08:20:54 PM

Quote from: cad_cdn on September 04, 2014, 08:17:21 PM

anyone have a problem with a previously good working wallet and solo miner, now saying 'password does not match recipient'...nothing was changed. only 1 password ever on the pc.

If you were using a v2 pool, and want to switch back to solo, you need to set reward recip back to yourself.

Quote from: Chairs on September 04, 2014, 08:16:41 PM

Quote from: burstcoin on September 04, 2014, 08:14:21 PM

Quote from: Chairs on September 04, 2014, 07:58:56 PM

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

Follow one of the guides linked in the first post about how to generate plots, but then choose either my v2 pool or uray's pool, and follow the instructions. uray's is probably a little easier to get started at, and he has better instructions posted here. http://burst-pool.cryptoport.io/howto.html

Sent 10 coins.

Thank you, I saw that it came in. I can't even get SOLO to run correctly right now. Everything is formatted the correct files are in, but when I edit run_generate and run it, it clearly doesn't run where as the guide says that it will take a while. There is something wrong in my configuration I guess.

I have wallet up and a server running, any suggestions?

run it from a command prompt or add pause to the next line so you can see the error.

I ran it from command and the error is:

"Error ocurred during initialization of VM
Could not reserve enough space for object heap"

Is that the allocation for the blocks?

Edit -

I'm creating this on a new partitioned drive.

A - Do I need to have windows installed on this drive?

B - Do I need to change the directory of the run_generate bat file or is it just pulling files from that location?

You need to either increase the number after -Xmx or decrease your stagger size.

A: no
B: it always uses the plots folder in the miner's folder.

I'm getting so frustrated. I normally don't have problems like this.

I dropped my stagger down to 1000 and my memory stayed at 4000. Now it's saying:

"The size of the object heap + perm gen exceeds the maximum representable size."

I followed the guide to a T. It says for every 200gb = 800000 plots.

I don't get what I'm doing wrong. Someone please help. I will repay you when I actually earn some coin.

Try -Xmx1000m

Chairs

newbie

Activity: 14

Merit: 0

Quote from: burstcoin on September 04, 2014, 08:37:02 PM

Quote from: Chairs on September 04, 2014, 08:27:47 PM

Quote from: burstcoin on September 04, 2014, 08:20:54 PM

Quote from: cad_cdn on September 04, 2014, 08:17:21 PM

anyone have a problem with a previously good working wallet and solo miner, now saying 'password does not match recipient'...nothing was changed. only 1 password ever on the pc.

If you were using a v2 pool, and want to switch back to solo, you need to set reward recip back to yourself.

Quote from: Chairs on September 04, 2014, 08:16:41 PM

Quote from: burstcoin on September 04, 2014, 08:14:21 PM

Quote from: Chairs on September 04, 2014, 07:58:56 PM

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

Follow one of the guides linked in the first post about how to generate plots, but then choose either my v2 pool or uray's pool, and follow the instructions. uray's is probably a little easier to get started at, and he has better instructions posted here. http://burst-pool.cryptoport.io/howto.html

Sent 10 coins.

Thank you, I saw that it came in. I can't even get SOLO to run correctly right now. Everything is formatted the correct files are in, but when I edit run_generate and run it, it clearly doesn't run where as the guide says that it will take a while. There is something wrong in my configuration I guess.

I have wallet up and a server running, any suggestions?

run it from a command prompt or add pause to the next line so you can see the error.

I ran it from command and the error is:

"Error ocurred during initialization of VM
Could not reserve enough space for object heap"

Is that the allocation for the blocks?

Edit -

I'm creating this on a new partitioned drive.

A - Do I need to have windows installed on this drive?

B - Do I need to change the directory of the run_generate bat file or is it just pulling files from that location?

You need to either increase the number after -Xmx or decrease your stagger size.

A: no
B: it always uses the plots folder in the miner's folder.

I'm getting so frustrated. I normally don't have problems like this.

I dropped my stagger down to 1000 and my memory stayed at 4000. Now it's saying:

"The size of the object heap + perm gen exceeds the maximum representable size."

I followed the guide to a T. It says for every 200gb = 800000 plots.

I don't get what I'm doing wrong. Someone please help. I will repay you when I actually earn some coin.

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: hodlgasm on September 04, 2014, 08:40:11 PM

Attempting to install miner on osx through terminal, after running sh run_dump_address.sh I get the following error:

MacBook-Pro:pocminer_v1 K$ sh run_dump_address.sh
Exception in thread "main" java.lang.UnsupportedClassVersionError: pocminer/POCMiner : Unsupported major.minor version 51.0

Could you explain what I need to do to get around this?

You need java 7.

hodlgasm

newbie

Activity: 6

Merit: 0

Attempting to install miner on osx through terminal, after running sh run_dump_address.sh I get the following error:

MacBook-Pro:pocminer_v1 K$ sh run_dump_address.sh
Exception in thread "main" java.lang.UnsupportedClassVersionError: pocminer/POCMiner : Unsupported major.minor version 51.0

Could you explain what I need to do to get around this?

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: Chairs on September 04, 2014, 08:27:47 PM

Quote from: burstcoin on September 04, 2014, 08:20:54 PM

Quote from: cad_cdn on September 04, 2014, 08:17:21 PM

anyone have a problem with a previously good working wallet and solo miner, now saying 'password does not match recipient'...nothing was changed. only 1 password ever on the pc.

If you were using a v2 pool, and want to switch back to solo, you need to set reward recip back to yourself.

Quote from: Chairs on September 04, 2014, 08:16:41 PM

Quote from: burstcoin on September 04, 2014, 08:14:21 PM

Quote from: Chairs on September 04, 2014, 07:58:56 PM

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

Follow one of the guides linked in the first post about how to generate plots, but then choose either my v2 pool or uray's pool, and follow the instructions. uray's is probably a little easier to get started at, and he has better instructions posted here. http://burst-pool.cryptoport.io/howto.html

Sent 10 coins.

Thank you, I saw that it came in. I can't even get SOLO to run correctly right now. Everything is formatted the correct files are in, but when I edit run_generate and run it, it clearly doesn't run where as the guide says that it will take a while. There is something wrong in my configuration I guess.

I have wallet up and a server running, any suggestions?

run it from a command prompt or add pause to the next line so you can see the error.

I ran it from command and the error is:

"Error ocurred during initialization of VM
Could not reserve enough space for object heap"

Is that the allocation for the blocks?

Edit -

I'm creating this on a new partitioned drive.

A - Do I need to have windows installed on this drive?

B - Do I need to change the directory of the run_generate bat file or is it just pulling files from that location?

You need to either increase the number after -Xmx or decrease your stagger size.

A: no
B: it always uses the plots folder in the miner's folder.

Chairs

newbie

Activity: 14

Merit: 0

Quote from: burstcoin on September 04, 2014, 08:20:54 PM

Quote from: cad_cdn on September 04, 2014, 08:17:21 PM

anyone have a problem with a previously good working wallet and solo miner, now saying 'password does not match recipient'...nothing was changed. only 1 password ever on the pc.

If you were using a v2 pool, and want to switch back to solo, you need to set reward recip back to yourself.

Quote from: Chairs on September 04, 2014, 08:16:41 PM

Quote from: burstcoin on September 04, 2014, 08:14:21 PM

Quote from: Chairs on September 04, 2014, 07:58:56 PM

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

Follow one of the guides linked in the first post about how to generate plots, but then choose either my v2 pool or uray's pool, and follow the instructions. uray's is probably a little easier to get started at, and he has better instructions posted here. http://burst-pool.cryptoport.io/howto.html

Sent 10 coins.

Thank you, I saw that it came in. I can't even get SOLO to run correctly right now. Everything is formatted the correct files are in, but when I edit run_generate and run it, it clearly doesn't run where as the guide says that it will take a while. There is something wrong in my configuration I guess.

I have wallet up and a server running, any suggestions?

run it from a command prompt or add pause to the next line so you can see the error.

I ran it from command and the error is:

"Error ocurred during initialization of VM
Could not reserve enough space for object heap"

Is that the allocation for the blocks?

Edit -

I'm creating this on a new partitioned drive.

A - Do I need to have windows installed on this drive?

B - Do I need to change the directory of the run_generate bat file or is it just pulling files from that location?

cad_cdn

hero member

Activity: 560

Merit: 500

thx

me thinks we need a troubleshooting\quirks page...

Quote from: burstcoin on September 04, 2014, 08:20:54 PM

Quote from: cad_cdn on September 04, 2014, 08:17:21 PM

anyone have a problem with a previously good working wallet and solo miner, now saying 'password does not match recipient'...nothing was changed. only 1 password ever on the pc.

If you were using a v2 pool, and want to switch back to solo, you need to set reward recip back to yourself.

Quote from: Chairs on September 04, 2014, 08:16:41 PM

Quote from: burstcoin on September 04, 2014, 08:14:21 PM

Quote from: Chairs on September 04, 2014, 07:58:56 PM

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

Follow one of the guides linked in the first post about how to generate plots, but then choose either my v2 pool or uray's pool, and follow the instructions. uray's is probably a little easier to get started at, and he has better instructions posted here. http://burst-pool.cryptoport.io/howto.html

Sent 10 coins.

Thank you, I saw that it came in. I can't even get SOLO to run correctly right now. Everything is formatted the correct files are in, but when I edit run_generate and run it, it clearly doesn't run where as the guide says that it will take a while. There is something wrong in my configuration I guess.

I have wallet up and a server running, any suggestions?

run it from a command prompt or add pause to the next line so you can see the error.

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: cad_cdn on September 04, 2014, 08:17:21 PM

anyone have a problem with a previously good working wallet and solo miner, now saying 'password does not match recipient'...nothing was changed. only 1 password ever on the pc.

If you were using a v2 pool, and want to switch back to solo, you need to set reward recip back to yourself.

Quote from: Chairs on September 04, 2014, 08:16:41 PM

Quote from: burstcoin on September 04, 2014, 08:14:21 PM

Quote from: Chairs on September 04, 2014, 07:58:56 PM

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

Follow one of the guides linked in the first post about how to generate plots, but then choose either my v2 pool or uray's pool, and follow the instructions. uray's is probably a little easier to get started at, and he has better instructions posted here. http://burst-pool.cryptoport.io/howto.html

Sent 10 coins.

Thank you, I saw that it came in. I can't even get SOLO to run correctly right now. Everything is formatted the correct files are in, but when I edit run_generate and run it, it clearly doesn't run where as the guide says that it will take a while. There is something wrong in my configuration I guess.

I have wallet up and a server running, any suggestions?

run it from a command prompt or add pause to the next line so you can see the error.

cad_cdn

hero member

Activity: 560

Merit: 500

anyone have a problem with a previously good working wallet and solo miner, now saying 'password does not match recipient'...nothing was changed. only 1 password ever on the pc.

hodlgasm

newbie

Activity: 6

Merit: 0

So I found my answer that this will work on osx as it is Java based, but could you clarify how to set up the miner? The windows/linux instructions don't particularly help as I'm a noob to mining. Would be greatly appreciated, even a very brief rundown. Thanks

Chairs

newbie

Activity: 14

Merit: 0

Quote from: burstcoin on September 04, 2014, 08:14:21 PM

Quote from: Chairs on September 04, 2014, 07:58:56 PM

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

Follow one of the guides linked in the first post about how to generate plots, but then choose either my v2 pool or uray's pool, and follow the instructions. uray's is probably a little easier to get started at, and he has better instructions posted here. http://burst-pool.cryptoport.io/howto.html

Sent 10 coins.

Thank you, I saw that it came in. I can't even get SOLO to run correctly right now. Everything is formatted the correct files are in, but when I edit run_generate and run it, it clearly doesn't run where as the guide says that it will take a while. There is something wrong in my configuration I guess.

I have wallet up and a server running, any suggestions?

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: Chairs on September 04, 2014, 07:58:56 PM

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

Follow one of the guides linked in the first post about how to generate plots, but then choose either my v2 pool or uray's pool, and follow the instructions. uray's is probably a little easier to get started at, and he has better instructions posted here. http://burst-pool.cryptoport.io/howto.html

Sent 10 coins.

Chairs

newbie

Activity: 14

Merit: 0

New to this whole cryptocurrency thing and I want to get in. I have 3TB free on my computer. Anyone mind explaining how to get into a pool? Please PM me with any information if you don't mind helping a newbie out.

Also, here is my ID since I see new people posting them - BURST-756S-GA2X-6E2N-6SXT9

Thank you guys.

uray

hero member

Activity: 1400

Merit: 505

Quote from: CHMinePeerz on September 04, 2014, 07:56:18 PM

is there an index of all usefull guides?

what are the minimum requirement of space to be able to mine a reasonable amount?

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1005. (Read 2170893 times)