hello... i m plotting a 34 tb raid 0 drive... it takes around 6 -7 min to write 2gbyte .... is it normal it takes so much time ?
cpu? 
Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1145. (Read 2170889 times)
August 25, 2014, 01:05:28 PM
August 25, 2014, 01:00:26 PM
hello... i m plotting a 34 tb raid 0 drive... it takes around 6 -7 min to write 2gbyte .... is it normal it takes so much time ?
August 25, 2014, 12:52:06 PM
hello to all
problem with wallet
I just started
found block)
morning sent a burst on 1000BURST Asset - all ok!
but the evening was the send button is not active (
while messages are sent
java, generation and mining work
??
problem with wallet
I just started
found block)
morning sent a burst on 1000BURST Asset - all ok!
but the evening was the send button is not active (
while messages are sent
java, generation and mining work
??
August 25, 2014, 12:34:34 PM
3 blocks in 33 mins nice 
August 25, 2014, 12:29:49 PM
this is called software raid 
and i need faster plotter like 10x
and i need faster plotter like 10xI was messing around with one of my GPU miners last night, and decided to try combining drives.
I took out all but one GPU. I ran SATA cables and power plugs to 4 2.5" laptop hard drives. An 80, 160, 160, and 250.
I restarted the computer and let Windows find them all and gave them quick formats to reset them.
Then in disk management, I went through the proceedure to clear them and span the 4 drives into one unit.
Now that it is all done, I have a 605 GB drive to plot and mine on. It shows in My Computer as a single 605 GB drive.
The AMD FX 4130 quad core is plotting it now.
Damn, I'm good!
I took out all but one GPU. I ran SATA cables and power plugs to 4 2.5" laptop hard drives. An 80, 160, 160, and 250.
I restarted the computer and let Windows find them all and gave them quick formats to reset them.
Then in disk management, I went through the proceedure to clear them and span the 4 drives into one unit.
Now that it is all done, I have a 605 GB drive to plot and mine on. It shows in My Computer as a single 605 GB drive.
The AMD FX 4130 quad core is plotting it now.
Damn, I'm good!
August 25, 2014, 12:06:12 PM
I was messing around with one of my GPU miners last night, and decided to try combining drives.
I took out all but one GPU. I ran SATA cables and power plugs to 4 2.5" laptop hard drives. An 80, 160, 160, and 250.
I restarted the computer and let Windows find them all and gave them quick formats to reset them.
Then in disk management, I went through the proceedure to clear them and span the 4 drives into one unit.
Now that it is all done, I have a 605 GB drive to plot and mine on. It shows in My Computer as a single 605 GB drive.
The AMD FX 4130 quad core is plotting it now.
Damn, I'm good!
I took out all but one GPU. I ran SATA cables and power plugs to 4 2.5" laptop hard drives. An 80, 160, 160, and 250.
I restarted the computer and let Windows find them all and gave them quick formats to reset them.
Then in disk management, I went through the proceedure to clear them and span the 4 drives into one unit.
Now that it is all done, I have a 605 GB drive to plot and mine on. It shows in My Computer as a single 605 GB drive.
The AMD FX 4130 quad core is plotting it now.
Damn, I'm good!
August 25, 2014, 11:40:10 AM
BURST-XHQ2-VKF8-X82E-BN3DM
11073283704811863744
4.19M
Unconfirmed 4186902.03
Mined Balance 0.00
it seems this guy has bought 4.19Million of burst..just occasionally saw it, never mind
11073283704811863744
4.19M
Unconfirmed 4186902.03
Mined Balance 0.00
it seems this guy has bought 4.19Million of burst..just occasionally saw it, never mind
August 25, 2014, 11:29:58 AM
August 25, 2014, 11:27:26 AM
No, not all peolple here is mining tonight. From 2.00 to 5.00 AM networkspeed is low.
I think people is west south europe is wanna sleep and power off you computer
approximate speed of a gain of speed is 200TB per day
I think people is west south europe is wanna sleep and power off you computer
approximate speed of a gain of speed is 200TB per day
August 25, 2014, 11:17:54 AM
I noticed a decrease in share in pool, is increasing the difficulty? 
Just seems like more people are mining on it.
Date Block Difficulty # Accounts
height in GB
25/8/2014 10:25 4915 1.311.919
25/8/2014 10:31 4917 1.313.320
25/8/2014 10:37 4918 1.314.001 737
25/8/2014 10:51 4921 1.316.102 738
25/8/2014 11:02 4922 1.316.765 738
25/8/2014 11:06 4923 1.317.437 738
25/8/2014 11:19 4924 1.318.022 739
25/8/2014 11:27 4925 1.318.586 739
25/8/2014 11:30 4927 1.319.671 739
25/8/2014 11:45 4933 1.323.220 740
25/8/2014 11:57 4936 1.324.928 740
25/8/2014 11:58 4937 1.325.489 740
25/8/2014 11:59 4938 1.326.039 740
25/8/2014 15:05 4983 1.354.765 748
25/8/2014 15:22 4984 1.355.351 749
25/8/2014 16:56 5014 1.372.915 750
25/8/2014 17:32 5023 1.379.447 753
25/8/2014 17:50 5026 1.381.814 753
25/8/2014 18:07 5027 1.382.509 753
25/8/2014 18:26 5030 1.384.347 754
25/8/2014 18:42 5036 1.387.852 754
Nice stat iscal. How TO do this report?
754 users are too low. Message via twitter/facebook to your friends about burst POC
NRS Version ----> More info ----> and manual feed EXCEL file.
BTW i think is +10 TB/hour
August 25, 2014, 11:03:06 AM
I noticed a decrease in share in pool, is increasing the difficulty?
Just seems like more people are mining on it.
Date Block Difficulty # Accounts
height in GB
25/8/2014 10:25 4915 1.311.919
25/8/2014 10:31 4917 1.313.320
25/8/2014 10:37 4918 1.314.001 737
25/8/2014 10:51 4921 1.316.102 738
25/8/2014 11:02 4922 1.316.765 738
25/8/2014 11:06 4923 1.317.437 738
25/8/2014 11:19 4924 1.318.022 739
25/8/2014 11:27 4925 1.318.586 739
25/8/2014 11:30 4927 1.319.671 739
25/8/2014 11:45 4933 1.323.220 740
25/8/2014 11:57 4936 1.324.928 740
25/8/2014 11:58 4937 1.325.489 740
25/8/2014 11:59 4938 1.326.039 740
25/8/2014 15:05 4983 1.354.765 748
25/8/2014 15:22 4984 1.355.351 749
25/8/2014 16:56 5014 1.372.915 750
25/8/2014 17:32 5023 1.379.447 753
25/8/2014 17:50 5026 1.381.814 753
25/8/2014 18:07 5027 1.382.509 753
25/8/2014 18:26 5030 1.384.347 754
25/8/2014 18:42 5036 1.387.852 754
Nice stat iscal. How TO do this report?
754 users are too low. Message via twitter/facebook to your friends about burst POC
August 25, 2014, 10:56:01 AM
I noticed a decrease in share in pool, is increasing the difficulty?
Just seems like more people are mining on it.
Date Block Difficulty # Accounts
height in GB
25/8/2014 10:25 4915 1.311.919
25/8/2014 10:31 4917 1.313.320
25/8/2014 10:37 4918 1.314.001 737
25/8/2014 10:51 4921 1.316.102 738
25/8/2014 11:02 4922 1.316.765 738
25/8/2014 11:06 4923 1.317.437 738
25/8/2014 11:19 4924 1.318.022 739
25/8/2014 11:27 4925 1.318.586 739
25/8/2014 11:30 4927 1.319.671 739
25/8/2014 11:45 4933 1.323.220 740
25/8/2014 11:57 4936 1.324.928 740
25/8/2014 11:58 4937 1.325.489 740
25/8/2014 11:59 4938 1.326.039 740
25/8/2014 15:05 4983 1.354.765 748
25/8/2014 15:22 4984 1.355.351 749
25/8/2014 16:56 5014 1.372.915 750
25/8/2014 17:32 5023 1.379.447 753
25/8/2014 17:50 5026 1.381.814 753
25/8/2014 18:07 5027 1.382.509 753
25/8/2014 18:26 5030 1.384.347 754
25/8/2014 18:42 5036 1.387.852 754
August 25, 2014, 10:43:40 AM
I noticed a decrease in share in pool, is increasing the difficulty?
The pool share difficulty hasn't changed, but it does not require more work to find a share. You're finding less shares because the overall Burst network difficulty is rising. Remember to find a share, the pool miner hashes all the applicable scoops then divides by the scaling factor (inverse of the difficulty) to get the deadline. If the deadline is below 50k, you have a share! This is different from POW mining because each share becomes harder to find as the difficulty increases, which is what is happening now. Also because the scaling factor (difficulty) variable comes into play for finding a share: the amount of shares required to find a block on average should be constant.
For POW: Amount of work to find a share is constant, amount of shares to find a block depends on difficulty
For POC: Amount of work to find a share depends on difficulty, amount of shares to find a block is constant
August 25, 2014, 10:28:16 AM
I noticed a decrease in share in pool, is increasing the difficulty?
Just seems like more people are mining on it.
August 25, 2014, 10:17:09 AM
dcct, did you get my last message?
Quote
I have a dedicated miner here at work that runs 24/7 and was gonna move the drive to it. I did the plotting on the computer at home because it has a LOT faster CPU in it and got the 2tb done probably days before the computer here would've. So i would like to move the drive to there but am having issues with moving the drive to other computers because the wallet will not open unless i copy over it.
This one?
You just need a client running there. You could as well install a new one and use it just for mining. Moving the plots over should be no problem.
Yes, but will this affect my blocks in my current wallet? Everytime before, when i would try to run the .bat file in the wallet it would open an close immediately. I found that if you just re copt the burst folder back in and overwrite the old wallet it would work and still allow you to use your plots. Just curious if i can do this now or if it will mess things up. Taken me quite a few days to find 1 block and if i read the wallet correctly i have 2 now lol dont wanna lose them!
August 25, 2014, 10:14:51 AM
I noticed a decrease in share in pool, is increasing the difficulty?
August 25, 2014, 10:13:46 AM
dcct, did you get my last message?
Quote
I have a dedicated miner here at work that runs 24/7 and was gonna move the drive to it. I did the plotting on the computer at home because it has a LOT faster CPU in it and got the 2tb done probably days before the computer here would've. So i would like to move the drive to there but am having issues with moving the drive to other computers because the wallet will not open unless i copy over it.
This one?
You just need a client running there. You could as well install a new one and use it just for mining. Moving the plots over should be no problem.
August 25, 2014, 10:09:17 AM
dcct, did you get my last message?
August 25, 2014, 10:08:22 AM
I like to announce:
The Plot-generator rewritten in C!
It has several advantages over the one written in Java:
- About twice as fast
- Support for larger stagger sizes, only limited by system memory
- More efficient memory handling. With just 3GB you can use Stagger size 8191, with 8GB 24000 is possible. Plots with larger stagger sizes are better, as they require less disk seeks to be read.
You need a 64bit Linux environment to run this. Maybe someone can port it to Windows?
How to run it:
Download, unpack (tar -xzf plotgenerator.tgz), compile (make)
Then use the same command line options as with the Java-generator:
You can download it here:
https://bchain.info/plotgenerator.tgz
The Plot-generator rewritten in C!
It has several advantages over the one written in Java:
- About twice as fast
- Support for larger stagger sizes, only limited by system memory
- More efficient memory handling. With just 3GB you can use Stagger size 8191, with 8GB 24000 is possible. Plots with larger stagger sizes are better, as they require less disk seeks to be read.
You need a 64bit Linux environment to run this. Maybe someone can port it to Windows?
How to run it:
Download, unpack (tar -xzf plotgenerator.tgz), compile (make)
Then use the same command line options as with the Java-generator:
Code:
./plot
You can download it here:
https://bchain.info/plotgenerator.tgz
Cool...Maybe I'll setup an Ubuntu setup to try this out....It would be nice if this was ported to Windows...
August 25, 2014, 10:07:46 AM
I don't know Cloakcoin wasn't a scam ?
Go and do you own research... 
Quote
Kids/Scamers like you can keep arguing with me i like these nonsense talk as you just said nothing in both of your posts.
Kids/Scammers like you, can keep arguing with me. But I don't like these foolish talk, as you just continuously posting nonsence in all of your posts 
Yep as a scam hunter since 2013 i always get accused to be a scammer. If you don't like how i talk there is always a ignore button just for your information.
lol How many scammer's head do you have?
Ok. Please,just never put a presumptuous words about restarting something that doesn't belongs to you. And everything will be Ok.
ScamBUSTER lol
Jump to: