Author

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 574. (Read 2171057 times)

member
Activity: 120
Merit: 73
Hi,

I know it's probably somewhere in the 700+ pages but can any tell me an easy way to send Burst to my wallet with the public key that's required for first time deposits?  I just stupidly transferred a fair amount from Poloniex and lost it!  I've looked around but can't seem to find any exchanges that allow you to include the public key for first transfers.

Also, just plotting 6TB at the moment with plenty of room for expansion.  What is the minimum TB suggested at present to give a good chance of finding blocks?

Come join us at http://burst.ga ! Smiley

I've setup for your site and I think it's working but where your instructions say wait for 4 blocks to confirm I have a webpage up http://localhost:8125/burst with a long line of text and that's it.  Will more lines appear with each block or have I done something wrong?

That's correct, it means your submission went through, now just wait for the four confirms and you're good to go! Send me your burst address and I will give you the 1500 burst I was giving to newcomers a while back Smiley

Thanks! BURST-JKNG-PNZA-SSTY-46H3B . It seems to be working the same signature as shown on your site so I guess all good.

Any way of checking my setup now it's been connected for some time?  Seems every time it submits shares I get an error submitting nonce or the standard error reading file which I would expect as I'm still plotting.  Are there any shares that have been submitted at all yet?  I can't see my address on burst.ga
Assuming you're trying to mine with that same address( BURST-JKNG-PNZA-SSTY-46H3B ) your reward recipient is not set. That's why you're getting the submitting nonce errors. The reward assignment will show up in your wallet as a transaction for 0 burst with a 1 burst fee after it has been set.

This is the two lines that appeared in my wallet when I set the reward assignment as per the site instructions :-


I'd also like to add that I can't seem to obtain a public key for my wallet.  I've tried sending messages, buying an alias and sending money but everything seems to take 1 burst and sits there with no confirms.  Also when I buy an alias it appears for a couple of seconds and then goes back to 'No aliases yet, register one!'

Did I need to start re-plotting again once I joined the pool as I was already plotting for my wallet?

The / at the end indicates that it hasn't been included in a block yet. Does the peers tab show you are connected to the network? What is the most recent block you see, and what wallet version are you using?

Lots of peers, Block 33217 and version 1.1.5
The only thing I can think of is if there is some transaction your client has which isn't validating for other users, so when you try to broadcast it, all your transactions are getting rejected, and your client temporarily blacklisted. First check if your clock is set correctly. If it is set too far in the future, it could cause this situation. If your clock is fine, try clearing unconfirmed transactions. There are 2 ways of doing this. The easy way is close the client, delete the burst_db folder, reopen it, and by the time it finishes syncing again the blacklisting will have worn off and you can try it again. The harder(but faster) way is to edit the .conf file in the /conf folder, setting "nxt.enableDebugAPI=true", restart the client, go to http://127.0.0.1:8125/test?requestTag=DEBUG in your web browser, click clearUnconfirmedTransactions, then submit. Wait at least 10 minute(for blacklisting to expire), then try the reward assignment again. Alternatively, this might fix itself if you wait long enough since the transactions will expire and disappear if they don't get into a block.

Awesome! I got blacklisted Smiley  OK, I've gone the easy way and it's all fired up again and downloading the blockchain.  Fingers crossed.  I'll report back.

OK, blockchain downloaded again and my coins are back Smiley  Problem though... I've set the reward recipient again to BURST-7CPJ-BW8N-U4XF-CWW3U and it's just sitting there with a '/' under confirms again.  Could I still be blacklisted?  Should I give up on this wallet and start another, possibly loosing my coins because I can't get them out?  I'd have to delete my plot files and start again but good opportunity to use a faster plotter.



This is really looking like a clock issue then. Check to make sure your clock is set up with the correct time zone. If you are in an area that does DST, make sure that is set correctly. Manually force your computer to sync the time from the internet. On windows this is change time and date settings-> internet time -> change settings -> update now

OMG you are right!  It was set for USA PST and I'm in Australia and the time was 1 hour out.  After setting the time and zone correctly it all works but unfortunately I find that someone has stolen my coin from the wallet!!
I really don't know why the wallet doesn't have better security like Google Authenticator or something. I'm not the only one I've heard about having coins stolen.  I'm gonna start a new wallet with 256+ character passphrase now cos it's my best bet to ensure it's secure.  Great coin but it needs better security!  If you actually look at the account that took my coins there are many payments to it that I can guarantee are all stolen coins so it's pretty wide spread.

Thanks for your help though.  Much appreciated and I'm excited about the potential.

full member
Activity: 168
Merit: 100
i will give the pool from cryptomining now a try.

My Stats at the moment

30TB Plots, all Optimized.

24h on Uray US pool: 7800 Burst
24h on Urays SG poll: 6200 Burst

now just switched to cryptomining. more tomorrow.

in the last few days profits are falling on uray SG ..
i do not know why...
sr. member
Activity: 355
Merit: 250
uray can you do something with EU pool? Is unreachable another time today.
hero member
Activity: 868
Merit: 1000
it seems like burst price movement is following bitcoin price movement.

If bitcoin goes to 600 i am sure burst will follow.

Or perhaps burst developer announce a new killer feature for burst before bitcoin reaches 600 ?
sr. member
Activity: 280
Merit: 250
Hi,

I know it's probably somewhere in the 700+ pages but can any tell me an easy way to send Burst to my wallet with the public key that's required for first time deposits?  I just stupidly transferred a fair amount from Poloniex and lost it!  I've looked around but can't seem to find any exchanges that allow you to include the public key for first transfers.

Also, just plotting 6TB at the moment with plenty of room for expansion.  What is the minimum TB suggested at present to give a good chance of finding blocks?

Come join us at http://burst.ga ! Smiley

I've setup for your site and I think it's working but where your instructions say wait for 4 blocks to confirm I have a webpage up http://localhost:8125/burst with a long line of text and that's it.  Will more lines appear with each block or have I done something wrong?

That's correct, it means your submission went through, now just wait for the four confirms and you're good to go! Send me your burst address and I will give you the 1500 burst I was giving to newcomers a while back Smiley

Thanks! BURST-JKNG-PNZA-SSTY-46H3B . It seems to be working the same signature as shown on your site so I guess all good.

Any way of checking my setup now it's been connected for some time?  Seems every time it submits shares I get an error submitting nonce or the standard error reading file which I would expect as I'm still plotting.  Are there any shares that have been submitted at all yet?  I can't see my address on burst.ga
Assuming you're trying to mine with that same address( BURST-JKNG-PNZA-SSTY-46H3B ) your reward recipient is not set. That's why you're getting the submitting nonce errors. The reward assignment will show up in your wallet as a transaction for 0 burst with a 1 burst fee after it has been set.

This is the two lines that appeared in my wallet when I set the reward assignment as per the site instructions :-


I'd also like to add that I can't seem to obtain a public key for my wallet.  I've tried sending messages, buying an alias and sending money but everything seems to take 1 burst and sits there with no confirms.  Also when I buy an alias it appears for a couple of seconds and then goes back to 'No aliases yet, register one!'

Did I need to start re-plotting again once I joined the pool as I was already plotting for my wallet?

The / at the end indicates that it hasn't been included in a block yet. Does the peers tab show you are connected to the network? What is the most recent block you see, and what wallet version are you using?

Lots of peers, Block 33217 and version 1.1.5
The only thing I can think of is if there is some transaction your client has which isn't validating for other users, so when you try to broadcast it, all your transactions are getting rejected, and your client temporarily blacklisted. First check if your clock is set correctly. If it is set too far in the future, it could cause this situation. If your clock is fine, try clearing unconfirmed transactions. There are 2 ways of doing this. The easy way is close the client, delete the burst_db folder, reopen it, and by the time it finishes syncing again the blacklisting will have worn off and you can try it again. The harder(but faster) way is to edit the .conf file in the /conf folder, setting "nxt.enableDebugAPI=true", restart the client, go to http://127.0.0.1:8125/test?requestTag=DEBUG in your web browser, click clearUnconfirmedTransactions, then submit. Wait at least 10 minute(for blacklisting to expire), then try the reward assignment again. Alternatively, this might fix itself if you wait long enough since the transactions will expire and disappear if they don't get into a block.

Awesome! I got blacklisted Smiley  OK, I've gone the easy way and it's all fired up again and downloading the blockchain.  Fingers crossed.  I'll report back.

OK, blockchain downloaded again and my coins are back Smiley  Problem though... I've set the reward recipient again to BURST-7CPJ-BW8N-U4XF-CWW3U and it's just sitting there with a '/' under confirms again.  Could I still be blacklisted?  Should I give up on this wallet and start another, possibly loosing my coins because I can't get them out?  I'd have to delete my plot files and start again but good opportunity to use a faster plotter.



This is really looking like a clock issue then. Check to make sure your clock is set up with the correct time zone. If you are in an area that does DST, make sure that is set correctly. Manually force your computer to sync the time from the internet. On windows this is change time and date settings-> internet time -> change settings -> update now
hero member
Activity: 619
Merit: 500
i will give the pool from cryptomining now a try.

My Stats at the moment

30TB Plots, all Optimized.

24h on Uray US pool: 7800 Burst
24h on Urays SG poll: 6200 Burst

now just switched to cryptomining. more tomorrow.
hero member
Activity: 868
Merit: 1000
I don't support a pool with that kind of asset. Gives burst a bad name.

Well, I am not as noble as you. I am just a miner and i look for best profit. So far , http://cryptomining.farm is giving me good payout. I was previously mining @ Uray pool and it was very good until he make some changes many weeks back and the payout suck big time , forces me to change pool. That's the good thing about mining, I don't own any asset and i can move anywhere i want anytime and i don't lose any money moving from pool to pool. In fact, i make more by moving because i only move if current pool is not good.
hero member
Activity: 588
Merit: 500
getting very good payout @ http://cryptomining.farm i suggest u guys check it out. I have been mining there for many weeks.

OR,

500 miners and he bribes people with his hash assets money....the asset without buy support, and a rip off price... there will never be roi.

Then when all investors find out they *try* to sell, but can't, cause the money diappeared, and the pool dies.

Sorry, but i feel sorry for investors

I am talking about the pool. Not asset.

I don't support a pool with that kind of asset. Gives burst a bad name.
hero member
Activity: 868
Merit: 1000
getting very good payout @ http://cryptomining.farm i suggest u guys check it out. I have been mining there for many weeks.

OR,

500 miners and he bribes people with his hash assets money....the asset without buy support, and a rip off price... there will never be roi.

Then when all investors find out they *try* to sell, but can't, cause the money diappeared, and the pool dies.

Sorry, but i feel sorry for investors

I am talking about the pool. Not asset.
sr. member
Activity: 355
Merit: 250
Whats wrong again with uray burst-pool3? It does not respond.
hero member
Activity: 588
Merit: 500
getting very good payout @ http://cryptomining.farm i suggest u guys check it out. I have been mining there for many weeks.

OR,

500 miners and he bribes people with his hash assets money....the asset without buy support, and a rip off price... there will never be roi.

Then when all investors find out they *try* to sell, but can't, cause the money diappeared, and the pool dies.

Sorry, but i feel sorry for investors
hero member
Activity: 868
Merit: 1000
getting very good payout @ http://cryptomining.farm i suggest u guys check it out. I have been mining there for many weeks.
legendary
Activity: 910
Merit: 1000
PHS 50% PoS - Stop mining start minting
Oh yea, and I hit 4 blocks today solo-mining with around 30TB.  Equivalent of .06BTC or $26 at current prices. That makes me very happy...

Profitable at 60 satoshi. We really need to up the net diff!!!

hmmm  As much as I would love to be able to justify buying a gross of 6 tb drives... Cheesy
hero member
Activity: 588
Merit: 500
Oh yea, and I hit 4 blocks today solo-mining with around 30TB.  Equivalent of .06BTC or $26 at current prices. That makes me very happy...

Profitable at 60 satoshi. We really need to up the net diff!!!
member
Activity: 111
Merit: 10
Oh yea, and I hit 4 blocks today solo-mining with around 30TB.  Equivalent of .06BTC or $26 at current prices. That makes me very happy...
member
Activity: 111
Merit: 10
Wow, BURST is doing amazing.  We are up big time in the last week, while most other alt coins are dropping ( https://www.cryptocoinsnews.com/bitcoin-price-explosion-leads-altcoin-price-drop/ ).  You have to consider that not only has BURST nearly doubled in value, we are holding tight against a major Bitcoin upswing.  I am definitely glad I have been in to this awesome coin since almost the beginning. Great dev(s), excellent community, solid technology - this has been a lot of fun!

Oh yea, BURST is still the only coin that allows you to enter the crypto market with HDD space.  WINNING!
hero member
Activity: 588
Merit: 500
one feature that has some long term implications for burst is dynamic plots.  lets say I have a 1TB HDD.  i'd like to be able to say use 90% of available space for a plot file, so that as I use up my disk for personal needs, the plot dynamically backs off.  the disk space will never be "wasted" and it can mine it a little bit against a pool.  this would put burst on most disks out there.  there's far more unused storage on people's C drive than on extra purchased disks.  then as crypto currencies become common place, it's not far fetched to imagine burst shipping pre-installed on consumer PCs, laptops and other devices etc.

I agree this is an excellent idea.

Couple issues, would the company selling the hard drive have to know the private key, in order to generate the public key used for generating the plot file?

Something I'd like to see is what percentage of the CPU would Burst be using to process transactions and check blocks and that kind of thing?

For that matter, maybe there could even be a specific chip in a computer dedicate to processing the blockchain, separate from the CPU and graphics card.  Would only really work in non-ASIC cryptos in my opinion.. which makes Burst perfect, especially with a dynamic plot as you are suggesting.

No, a plot is linked to your numeric account id. The pass phrase is only required to sign nonces while mining. It would be cool to buy hdd's pre plotted with the hdd manufacturers great miner Cheesy
hero member
Activity: 527
Merit: 503
one feature that has some long term implications for burst is dynamic plots.  lets say I have a 1TB HDD.  i'd like to be able to say use 90% of available space for a plot file, so that as I use up my disk for personal needs, the plot dynamically backs off.  the disk space will never be "wasted" and it can mine it a little bit against a pool.  this would put burst on most disks out there.  there's far more unused storage on people's C drive than on extra purchased disks.  then as crypto currencies become common place, it's not far fetched to imagine burst shipping pre-installed on consumer PCs, laptops and other devices etc.

I agree this is an excellent idea.

Couple issues, would the company selling the hard drive have to know the private key, in order to generate the public key used for generating the plot file?

Something I'd like to see is what percentage of the CPU would Burst be using to process transactions and check blocks and that kind of thing?

For that matter, maybe there could even be a specific chip in a computer dedicate to processing the blockchain, separate from the CPU and graphics card.  Would only really work in non-ASIC cryptos in my opinion.. which makes Burst perfect, especially with a dynamic plot as you are suggesting.
full member
Activity: 153
Merit: 100
A quick update to investors & not

Burst Long Term Price Support project

You may wonder if Nevril (myself) is so idiot to spend your invested Bitcoins in qASICs now that its value is raising like a rocket...
The answer is no. Don't worry, I'm going to squeeze the highest hashing power possible out of them!

Good move!
full member
Activity: 248
Merit: 100
I'm not real
one feature that has some long term implications for burst is dynamic plots.  lets say I have a 1TB HDD.  i'd like to be able to say use 90% of available space for a plot file, so that as I use up my disk for personal needs, the plot dynamically backs off.  the disk space will never be "wasted" and it can mine it a little bit against a pool.  this would put burst on most disks out there.  there's far more unused storage on people's C drive than on extra purchased disks.  then as crypto currencies become common place, it's not far fetched to imagine burst shipping pre-installed on consumer PCs, laptops and other devices etc.
Jump to: