Topic: [ANN][CACH] CACHeCoin released based on scrypt-jane - page 90. (Read 224425 times)
For those who want to deploy a p2pool node without any hustle, I've made a vagrant box package. It's based on arch linux and has cachecoin wallet and p2pool software installed and started on bootup. you'll have to edit Vagrant file if you want to point it to public space though
What's a good hashrate for a R9 280X currently? I'm now pushing 611kh/s on one of mine at 1150/1500.
Just to prove I'm not a complete noob like my last post suggested.
I've just copied my tweaked scrypt130111.cl file from my standard cgminer folder and made similar fine tunes to the scrypt-jane.cl file and boosted my hashrate from 546kh/s~ to 586kh/s on both of my R9 280x.
I'm going to test it over night to make sure I'm getting accepts and coins in my wallet and then I can provide the files to anyone else to try. The tweaks assume you only ever use a lookup gap of 2.
I've just copied my tweaked scrypt130111.cl file from my standard cgminer folder and made similar fine tunes to the scrypt-jane.cl file and boosted my hashrate from 546kh/s~ to 586kh/s on both of my R9 280x.
I'm going to test it over night to make sure I'm getting accepts and coins in my wallet and then I can provide the files to anyone else to try. The tweaks assume you only ever use a lookup gap of 2.
Ok, don't worry all. I've sussed it, but I'm not sure why this works. I changed --scrypt-jane to --scrypt and now I don't have HW errors and I am getting plenty of accepts.
Some mining clients take -scrypt as working for CACHe - I've found this also, and have mined since launch quite happily 
Ok, don't worry all. I've sussed it, but I'm not sure why this works. I changed --scrypt-jane to --scrypt and now I don't have HW errors and I am getting plenty of accepts.
I can't for the life of me get mining to work.
I've downloaded the modified cgminer from https://sites.google.com/site/rmdavidson/
Used the suggested settings (cgminer.exe --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388949883) and I just get constant HW errors.
Are there any other settings I should be using like -g 1 -I 13 -w 256 --thread-concurrency 8192 --lookup-gap 2?
Every other type of coin I mine works fine MAX/Vert/Kitteh/PANDA etc.
I'm running on 2x R9 280X.
Cheers
Will
I've downloaded the modified cgminer from https://sites.google.com/site/rmdavidson/
Used the suggested settings (cgminer.exe --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388949883) and I just get constant HW errors.
Are there any other settings I should be using like -g 1 -I 13 -w 256 --thread-concurrency 8192 --lookup-gap 2?
Every other type of coin I mine works fine MAX/Vert/Kitteh/PANDA etc.
I'm running on 2x R9 280X.
Cheers
Will
Geez so much for my 0.0065 buy order, sigh
I will move over to the new pool once my rig has sorted its gremlins out with setting up scrypt jane
I will move over to the new pool once my rig has sorted its gremlins out with setting up scrypt jane
wow 21 btc buy wall just got eaten on poloniex
PLEASE DISTRIBUTE YOUR HASHRATE
Singula has been working hard to set up a second pool so we can make sure that the network is protected against attacks - now even though registrations are closed, people still just make more workers to add to the first pool. Please when you want to mine move some of your miners away from cach.catcoin.cz either to p2p or to the alternative pool at pool.cachecoin.net.
I've set up second traditional pool at http://pool.cachecoin.net
If somebody is reading this and still mining at cach.catcoin.cz consider switching either to the second pool or one of p2pool nodes. As an incentive to switch, the second pool has currently lower fees (half the percentage of first pool fees). Once enough people will switch either to second pool or to p2pool nodes, I'll lower the fee on the first pool, so both pools will have equal, or very close to equal fees (hoping to keep the pool hashrates balanced to be approximately equal on both pools and I hope that by setting the fee slightly above fees in p2pool nodes it will balance the hashrate a bit in favor of p2pool nodes).
Also, new registrations are now closed on first pool, so new users have to mine either at second pool or one of P2pool nodes (or mine solo, but unless they have really good mining rig, I wouldn't recommend that).
Also, someone from USA requested my help with setting up own CACH mining pool, so we may soon have third traditional (mpos) pool for CACH mining (hosted on another continent than first two, so perhaps it will end up as preferred pool for US users, further distributing the hashrate).
If somebody is reading this and still mining at cach.catcoin.cz consider switching either to the second pool or one of p2pool nodes. As an incentive to switch, the second pool has currently lower fees (half the percentage of first pool fees). Once enough people will switch either to second pool or to p2pool nodes, I'll lower the fee on the first pool, so both pools will have equal, or very close to equal fees (hoping to keep the pool hashrates balanced to be approximately equal on both pools and I hope that by setting the fee slightly above fees in p2pool nodes it will balance the hashrate a bit in favor of p2pool nodes).
Also, new registrations are now closed on first pool, so new users have to mine either at second pool or one of P2pool nodes (or mine solo, but unless they have really good mining rig, I wouldn't recommend that).
Also, someone from USA requested my help with setting up own CACH mining pool, so we may soon have third traditional (mpos) pool for CACH mining (hosted on another continent than first two, so perhaps it will end up as preferred pool for US users, further distributing the hashrate).
I'm still getting 0.00 stake with 5.0.0 windows qt wallet
i think thats because of line 1028 of the main.cpp
Code:
if(pindexBest->GetBlockTime() >= 1393140000)
nSubsidy = nCoinAge * 33 * nRewardCoinYear / (365 * 33 + 8);
nSubsidy = nCoinAge * 33 * nRewardCoinYear / (365 * 33 + 8);
The changes in the codes havent yet an influence.
After that specific time, should be the 23 feb, changes will apply.
Sent 0.03
I'm still getting 0.00 stake with 5.0.0 windows qt wallet
Please distribute the hashrate and join P2Pools
Since we still only have on traditional pool I strongly urge you to distribute your hashrate to strenghten the coin!
At the same time I have again good news:
http://cache.cryptoprojects.eu:8336 has been updated to the latest wallet and the pool has been upgraded so on Sunday you can continue mining without any issues!
Happy P2P Mining - and please distribute your hashrate, information on p2pools can be found here:
https://bitcointalksearch.org/topic/m.5187947
Since we still only have on traditional pool I strongly urge you to distribute your hashrate to strenghten the coin!
At the same time I have again good news:
http://cache.cryptoprojects.eu:8336 has been updated to the latest wallet and the pool has been upgraded so on Sunday you can continue mining without any issues!
Happy P2P Mining - and please distribute your hashrate, information on p2pools can be found here:
https://bitcointalksearch.org/topic/m.5187947
damn poloniex seems to have issue with cache deposit, anyone waiting for their coins to appear in balance?
CACHeCoin Windows Wallet Update v5.0.0
Download: https://www.dropbox.com/s/hlda19nza8s6znl/CACHeCoin-Qt-Windows-v5.0.0.zip
zip md5 = 69c3eb81a250f4609e5eccb4ab9675fb
If you appreciate this, please tip me a small sum:
BTC: 1Mv8pfVWnbMWSzSyjA6kZWmPuyka77utg6
CACH: CL7yVncxofHUwY97HpJ4PYT2GHczzwyjvP
Thank you very much.
Download: https://www.dropbox.com/s/hlda19nza8s6znl/CACHeCoin-Qt-Windows-v5.0.0.zip
zip md5 = 69c3eb81a250f4609e5eccb4ab9675fb
If you appreciate this, please tip me a small sum:
BTC: 1Mv8pfVWnbMWSzSyjA6kZWmPuyka77utg6
CACH: CL7yVncxofHUwY97HpJ4PYT2GHczzwyjvP
Thank you very much.
Is there a bounty for building the new Windows wallet? I can build it if required.
ps. Snard, please come online :]
ps. Snard, please come online :]
0.03 btc from me
Is there a bounty for building the new Windows wallet? I can build it if required.
ps. Snard, please come online :]
ps. Snard, please come online :]
Please update OP:
- Hint on Windows QT-Version -> old version!!
- delete OS X Wallet bounty (done!)
- add OS X conf-Folder: /Users/%user%/Library/Application\ Support/CACHeCoin/
- add your CPU-Miner maybe
Thanks!
- Hint on Windows QT-Version -> old version!!
- delete OS X Wallet bounty (done!)
- add OS X conf-Folder: /Users/%user%/Library/Application\ Support/CACHeCoin/
- add your CPU-Miner maybe
Thanks!
Jump to: