Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6913. (Read 9723782 times)

3504.99 DRK received, thanks everyone.

I'm not really against ASICs in the long run, I'm just hoping it takes at least five years for Darkcoin. They'll have to implement the 11 algorithms, which according to my understanding of electrical engineering (minimal), would be really difficult.

I just sent you a payment for 3404.99, thanks!

d98183197bcc047b80a2c0624e0164d868292d4e197362b36570388ddc09e5c8-000

If you really want to see GPU resistant, see XPM and QRK algo, cause they require decision making so a practical GPU miner is not possible.

ASIC is always possible unless the algo is an x86 instruction set.

And that confirms what I just said above.

So this became pointless against scrypt.

But once scrypt has an ASIC, this'll be of some use for some time cause this'll too have an ASIC later on.

lotterymining.com Update:

website with be offline later, but stratum will continue to run for most of the time
only time stratum will be offline is when the server is rebooted

long bearded explaination:

im going to install Engine X instead (nginx) of apache to make the website faster
then reboot

What is the point of having darkcoin on this site if it's already released? I think I'm missing something

Could anyone upload compiled linux GPU minining binaries?

I've been mining on 2 laptops for the past 1 week and barely got 17 coins... need to mine a little bit more.

Thanks!

Ok,
Thank you very much.. For the moment -I'm downloading the 13.12 (I saw that I have 13.1)
If not working I'll try the beta with your parameter.. I'll inform you. May be I'll finish tomorrow ...

Yah, I think it's just time for me to go to bed, it's late!  G'night all!

That pool is taking lightyears to open for me in the browser. DDOSed? Try using another pool.

Well, I noticed my miner wasn't doing anything, like it was stuck, so I rebooted it and now it can't read my url


[23:15:31] Most likely you have input the wrong URL, forgotten to add a port, or
 have not set up workers
[23:15:31] Pool: 0  URL: stratum+tcp://drk.lotterymining.com:4444 User: TanteStefana.2  Pas
sword: P
[23:15:31] Press any key to exit, or sgminer will try again in 15s.
[23:15:32] (null) difficulty changed to 0.007812
[23:15:41] Waiting for work to be available from pools.
[23:15:46] Network diff set to 32
[23:15:46] Work available from pools, resuming.
[23:16:10] Network diff set to 32
[23:16:10] Stratum from (null) detected new block
[23:18:43] Network diff set to 32
[23:18:43] Stratum from (null) detected new block

Or is it really actually connected and just not hashing?  It doesn't get any accepteds??

Lebubar if I remember right you have a 5xxx series radeon. This fixed it for me:

http://www2.ati.com/drivers/beta/amd_catalyst_14.1_betav1.6.exe ---- Beta drivers from AMD cat 14.1

And for your bat file

sgminer --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u username  -p password  -I 16 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 3200

Try this, especially the thread concurrency as that makes or breaks it for me.

EDIT: Set this up on a second PC in the house running crossfire 5770, same settings. Pulling 600 Kh/s per gpu.. Fantastic!

I heard there was at least another 500DRK added. That's what someone posted.

I will say so far it is looking pretty good!

Ok i'll try. I'm downloading version 13.12.

meanwhile here the result with option --debug :
[01:14:33] Started sgminer 4.0.0
[01:14:33] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[01:14:33] CL Platform 0 name: AMD Accelerated Parallel Processing
[01:14:33] CL Platform 0 version: OpenCL 1.2 AMD-APP (1084.4)
[01:14:33] Platform 0 devices: 1
[01:14:33]      0       Juniper
[01:14:33] Number of ADL devices: 1
[01:14:33] ATI ADL Overdrive5 API found.
[01:14:33] ATI ADL Overdrive6 API found.
[01:14:33] Found 3 ADL adapters
[01:14:33] ADL index 0, id 15881728 - BIOS partno.: 113-HD575XZND71_113-C01201-022, version: 012.016.000.000, date: 2009/12/1
4 04:20
[01:14:33] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_68BE&SUBSYS_29821682&REV_00_4&3363D276&0&0008A
 iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0 iVendorID:1002 name:ATI Radeon HD 5700 Series
[01:14:33] ADL index 1, id 15881728 - BIOS partno.: 113-HD575XZND71_113-C01201-022, version: 012.016.000.000, date: 2009/12/1
4 04:20
[01:14:33] ADL index 2, id 15881728 - BIOS partno.: 113-HD575XZND71_113-C01201-022, version: 012.016.000.000, date: 2009/12/1
4 04:20
[01:14:33] GPU 0 ATI Radeon HD 5700 Series hardware monitoring enabled
[01:14:33] ADL GPU 0 is Adapter index 0 and maps to adapter id 15881728
[01:14:33] GPU 0 BIOS partno.: 113-HD575XZND71_113-C01201-022, version: 012.016.000.000, date: 2009/12/14 04:20
[01:14:33] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[01:14:33] Init GPU thread 0 GPU 0 virtual GPU 0
[01:14:33] CL Platform vendor: Advanced Micro Devices, Inc.
[01:14:33] CL Platform name: AMD Accelerated Parallel Processing
[01:14:33] CL Platform version: OpenCL 1.2 AMD-APP (1084.4)
[01:14:33] List of devices:
[01:14:33]      0       Juniper
[01:14:33] Selected 0: Juniper
[01:14:33] Preferred vector width reported 4
[01:14:33] Max work group size reported 256
[01:14:33] Max shaders calculated 576
[01:14:33] Max mem alloc size is 803209216
[01:14:33] GPU 0: selecting lookup gap of 2
[01:14:33] GPU 0: selecting thread concurrency of 6016
[01:14:33] No binary found, generating from source
[01:14:33] Setting worksize to 256
[01:14:33] cl_amd_media_ops found, setting BITALIGN
[01:14:33] BFI_INT patch requiring device not found, will not BFI_INT patch
[01:14:33] CompilerOptions: -Ikernel -D LOOKUP_GAP=2 -D CONCURRENT_THREADS=6016 -D WORKSIZE=256 -D BITALIGN -D GOFFSET
[01:15:31] Error -11: Building Program (clBuildProgram)
[01:15:31] calclCompile failedError: Creating kernel search failed!

[01:15:31] Failed to init GPU thread 0, disabling device 0
[01:15:31] Restarting the GPU from the menu will not fix this.
[01:15:31] Try restarting sgminer.
Press enter to continue:

Hey PHM, this was an issue with 5xxx radeon cards. I updated from cat 12.3? Whichever is the latest to the 14 beta and it started working. Thread concurrency is a big issue here, I can't set it to my usual values. If I run at 3200, it runs -- if i set thread concurrency to 4000 it outputs that same kernel error.

Its running though

DarkCoin was added to AltCoinCalendar.info

Update your Catalyst drivers if you have some old version.
Run sgminer with --debug and show me the console output.

ok working.

But I had to put in --no-adl because my 290x is water blocked.

i don't know sgminer that well, only cgminer.

is there a way to get sgminer to ignore my fanless 290x with out using --no-adl?