Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6917. (Read 9723475 times)

What is the efficiency? Have you mesaured watts?

Just an update:

2Mh/s on 280X
1.7Mh/s on 7950.

Less than 1% rejected.  My power draw at the wall is only 450W, when litecoin mining it 800W.  So I can probably optimize it a fair bit via thread settings etc.  I have no idea what will work well.

1,500DRK to someone that will help me get a windows environment setup to compile darkcoin-qt.exe, darkcoind.exe, minerd and sgminer.exe.

I can setup remote access to the PC for you.

WE NEED WINDOWS SGMINER !!!!!!!!!!!!!!!!!!

I can do this on Linux but haven't a clue for windows. I'm reading up on it, and if by some miracle I compile something that can be shared...I'll certainly post it, but don't hold your breath!  LOL  Sorry!

Works for me. 2MH on a 280X, 1.2MH on a 6950.

Efficiency is better than I was expecting (based on load). Only slightly below that of the Maxcoin keccak kernel, which is also SHA-3, but considering there's 11 SHA-3 kernels here, I think that's pretty good going. Good job phm!

Yes please, windows!

Thank you!

Seems to be working fine for me right now.  I think it's just that we're small, and we can go through dry spells.  Also, the website being a little laggy doesn't equate to less coin per hour?? 

Can someone please compile a windows exe?

It just compiled it, and it looks to be working!

I'm not sure if the feedback im getting from sgminer is correct, but the pool is saying that my working is going at 5,400 kh/s Thats with two 7950's and one R280.  I'm sure my setting, threads etc are far from optimal.

sgminer version 4.0.0 - Started: [2014-02-15 02:39:43]
--------------------------------------------------------------------------------
(5s):5.488M (avg):5.414Mh/s | A:0  R:0  HW:0  WU:0.0/m
ST: 2  SS: 0  NB: 5  LW: 151  GF: 0  RF: 0
Connected to (null) (stratum) diff 0 as user xxxx
Block: 835147cb...  Diff:23  Started: [02:45:08]  Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:                | 2.028M/2.053Mh/s | R:  0.0% HW:0 WU:0.0/m I:13
 GPU 1:                | 1.672M/1.689Mh/s | R:  0.0% HW:0 WU:0.0/m I:20
 GPU 2:                | 1.715M/1.733Mh/s | R:  2.9% HW:0 WU:0.0/m I:20
--------------------------------------------------------------------------------

[02:43:32] Accepted 0e000000 Diff 0/0 GPU 1 at (null)
[02:43:42] Accepted 6a000000 Diff 0/0 GPU 0 at (null)
[02:43:51] Network diff set to 23
[02:43:51] Stratum from (null) detected new block
[02:44:07] Network diff set to 23
[02:44:07] Stratum from (null) detected new block
[02:44:10] Accepted 35000000 Diff 0/0 GPU 2 at (null)
[02:44:18] Accepted 3e000000 Diff 0/0 GPU 2 at (null)
[02:44:21] Accepted 4a000000 Diff 0/0 GPU 1 at (null)
[02:44:25] Accepted 39000000 Diff 0/0 GPU 1 at (null)
[02:44:28] Accepted 57000000 Diff 0/0 GPU 1 at (null)
[02:44:28] Accepted 22000000 Diff 0/0 GPU 0 at (null)
[02:44:30] Accepted 09000000 Diff 0/0 GPU 0 at (null)
[02:44:34] Accepted 6a000000 Diff 0/0 GPU 1 at (null)
[02:44:41] Accepted 1a000000 Diff 0/0 GPU 0 at (null)
[02:44:50] Accepted 5f000000 Diff 0/0 GPU 0 at (null)
[02:44:50] Accepted 67000000 Diff 0/0 GPU 0 at (null)
[02:44:53] Accepted 27000000 Diff 0/0 GPU 0 at (null)

Thanks to all involed, I'll be sending some coins!

Edit: Yeah, getting about 5.5Mh/s right now with my three cards.  But I noticed I'm only pulling about 450W at the wall, where as I normally pull about 800W, so I'm sure it can go even faster.

No support for Nvidia, I guess?

+1

Now if I only had coins to send ...

Holy crap time to go!  I'll see if I can get this running on my unix / BAMT rig with three Radeon GPUs.  I'll give it a shot, but I might need some step by steps!

Thanks.

Any solution for this yet?

Phm gave us his GPU miner code, and I merged in his changes into my project at https://github.com/evan82/darkcoin-sgminer

I got it to compile and it seems to work for me, although I have a terrible GPU so I'm not positive.

Try to compile it and let me know if it works so I can pay the man.

Thanks!

Wow, that would be VERY awesome!

Any news on windows version of this new miner?

Allright, some stats on CPU performance.

Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz: 419.57 khash/s
Intel(R) Xeon(R) CPU E3-1270 V2 @ 3.50GHz: 489.20 khash/s
Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz: 572.52 khash/s

Invalid shares <<1%

Nice work everyone! This coin is going places!

I'll have to try the new miner on my VPS!... Hopefully it works!

Any work on a windows one yet? I

CPU: Atom C2758
AES-NI: Yes
AVX: No

Generic kernel?
Not sure what that means. I'm using a standard Ubuntu 13.10:

$ uname -a
Linux d510 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

[/quote]

Ok, this is right. I tried before to compile with AES-NI without AVX, and I had a 14% improvement. Adding AVX I achieved 21%.
[/quote]

For me on ubuntu, on AWS instance from :  
311.87 khash/s (yay!!!) (1.2c)
to
[2014-02-15 00:03:03] accepted: 8/8 (100.00%), 375.04 khash/s (yay!!!)

Nice work ) (~ 20%)

Can make a script inst13.sh : vi inst13.sh
sudo apt-get update

sudo apt-get install -y build-essential m4 libssl-dev libdb++-dev libboost-all-dev libminiupnpc-dev git automake libcurl4-openssl-dev

git clone https://github.com/elmad/darkcoin-cpuminer-1.3-avx-aes

cd darkcoin-cpuminer-1.3-avx-aes

chmod a+x autogen.sh

./autogen.sh

./configure CFLAGS="-O3 -march=native"

make
____________
chmod u+x inst13.sh
./inst13.sh


EDIT :
Not working on the Azure free trial ubuntu :
error: incompatible types when assigning to type ‘__m128i’ from type ‘int’