Topic: [ANN][DCR] Decred - Community Governance | Bitcoin Devs | Lightning Network - page 492. (Read 1201380 times)
February 03, 2016, 07:18:44 AM
interessting project - but why so many forks on github?
February 03, 2016, 07:12:06 AM
Looking forward to the start. Have registerd at the airdrop and got confirmation. 
We just have to wait until 8th of Feb. I hope till then there will be no errors in testnet 
February 03, 2016, 07:06:55 AM
Not forget that 24 hours before all the software will be made public.
And at the moment is already possible to testnet the wallet, the miner and the daemon!
https://forum.decred.org/threads/guide-how-i-got-my-daemon-wallet-and-miner-running-on-testnet-also-started-solo-stake-mining.352/page-10#post-6133
On this step-by-step guide you will find all you need to setup in order to be ready at launch day
February 02, 2016, 11:16:20 PM
What's a normal hashrate for one 280x? I keep getting 1.4/1.5, but according to dr. Google i could get ~2-2.5?
Core 1100 Mem 1500
Intensity at 14
I don't get it.
Core 1100 Mem 1500
Intensity at 14
I don't get it.
I get 1.4-1.5 too . This is 14 round blake, not 8 round, don't forget that
Ocminer, as soon as you have a windows.exe miner let us know and post link. I can test with AMD 280x or Nvidia 980M if a miner is available.
Here, I made binaries of OCMiner's git. My signature on these certifies that they are compiled from the same code on his git - I made no mods except what I needed to in order to make it cross-build for Win64. It does NOT certify that I vouch for the code, as I've not gone over it. Anyways, yeah, have some:
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip.sig
Now I have to go diff the bugfixes done by ocminer and the bugfixes done by one of the Decred devs against my own private copy of cgminer that's been heavily edited and merge in the bug fixes, so I'll be busy for a bit.
linux please wolf? ...
#crysx
Thanks a lot Wolf, my changes are only in "cgminer.c" - the endianness of "roll_work" was switched, so it isn't too much, but I've noticed a few other places in the code where the endianness *SHOULD* be obviously wrong too but I did not change it (for now) as the miner is working and I'm by far no expert with miner coding
IMHO the code needs a major cleanup, I like ccminer/cpuminer much more for coding such things, it's much easier to understand (for me).
@crysx you need a compiled linux version ? It's as easy as "sh autogen.sh" then "./configure" and "make"
no - i never need the compiled version guys ...
im looking for the git ...
ocminer - yours in cloned and setup - but refuses to compile ...
wolf - i was asking for the git for your version so that i can compile ...
one of the two of your should work ...
and im looking for a ccminer version - as thefarm will be sitting there idly by if i dont get a nvidia version compiled ...
#crysx
Mine's not on git... also, there's not a ccminer version, but you know CGMiner runs on Nvidia, too.
February 03, 2016, 05:31:42 AM
Not forget that 24 hours before all the software will be made public.
February 03, 2016, 05:15:44 AM
So today we have the 3rd of February. It would be good to have further information from the devs regarding the launch of the main net.
Looking forward to the start. Missed the airdrop but there will be some dumpers that will wipe out there coins at the very beginning, if this goes to an exchange.
Looking forward to the start. Missed the airdrop but there will be some dumpers that will wipe out there coins at the very beginning, if this goes to an exchange.
just read one post before yours...
February 03, 2016, 05:09:45 AM
Looking forward to the start. Have registerd at the airdrop and got confirmation.
February 02, 2016, 11:04:54 PM
What's a normal hashrate for one 280x? I keep getting 1.4/1.5, but according to dr. Google i could get ~2-2.5?
Core 1100 Mem 1500
Intensity at 14
I don't get it.
Core 1100 Mem 1500
Intensity at 14
I don't get it.
I get 1.4-1.5 too . This is 14 round blake, not 8 round, don't forget that
Ocminer, as soon as you have a windows.exe miner let us know and post link. I can test with AMD 280x or Nvidia 980M if a miner is available.
Here, I made binaries of OCMiner's git. My signature on these certifies that they are compiled from the same code on his git - I made no mods except what I needed to in order to make it cross-build for Win64. It does NOT certify that I vouch for the code, as I've not gone over it. Anyways, yeah, have some:
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip.sig
Now I have to go diff the bugfixes done by ocminer and the bugfixes done by one of the Decred devs against my own private copy of cgminer that's been heavily edited and merge in the bug fixes, so I'll be busy for a bit.
linux please wolf? ...
#crysx
Thanks a lot Wolf, my changes are only in "cgminer.c" - the endianness of "roll_work" was switched, so it isn't too much, but I've noticed a few other places in the code where the endianness *SHOULD* be obviously wrong too but I did not change it (for now) as the miner is working and I'm by far no expert with miner coding
IMHO the code needs a major cleanup, I like ccminer/cpuminer much more for coding such things, it's much easier to understand (for me).
@crysx you need a compiled linux version ? It's as easy as "sh autogen.sh" then "./configure" and "make"
Mine were in ocl.c, ocl.h, driver-opencl.c, miner.h, findnonce.c, findnonce.h, and, of course, blake256.cl. Anyways, as you no doubt can tell - the rebasing of all of my modifications and replacements on top of your new cgminer base is done, then I pulled in this commit here from one of the Decred devs: https://github.com/cjepson/cgminer/commit/2aca43073f92992703d8d6cc8631c348a0ad7d40 - Freya's hashing on your pool now.
February 03, 2016, 05:02:54 AM
So today we have the 3rd of February. It would be good to have further information from the devs regarding the launch of the main net.
Looking forward to the start. Missed the airdrop but there will be some dumpers that will wipe out there coins at the very beginning, if this goes to an exchange.
Looking forward to the start. Missed the airdrop but there will be some dumpers that will wipe out there coins at the very beginning, if this goes to an exchange.
I don't know if someone will dump his coins, but for sure at the launch will be chepaer than later, the project looks solid and tey are building a strong community.
Looks like the first exchange where Decred will land is Bleutrade...probably no hig volumes here compaed to others exchange, but major exchange will follow.
February 03, 2016, 04:52:42 AM
So today we have the 3rd of February. It would be good to have further information from the devs regarding the launch of the main net.
Looking forward to the start. Missed the airdrop but there will be some dumpers that will wipe out there coins at the very beginning, if this goes to an exchange.
Looking forward to the start. Missed the airdrop but there will be some dumpers that will wipe out there coins at the very beginning, if this goes to an exchange.
February 02, 2016, 10:50:38 PM
What's a normal hashrate for one 280x? I keep getting 1.4/1.5, but according to dr. Google i could get ~2-2.5?
Core 1100 Mem 1500
Intensity at 14
I don't get it.
Core 1100 Mem 1500
Intensity at 14
I don't get it.
I get 1.4-1.5 too . This is 14 round blake, not 8 round, don't forget that
Ocminer, as soon as you have a windows.exe miner let us know and post link. I can test with AMD 280x or Nvidia 980M if a miner is available.
Here, I made binaries of OCMiner's git. My signature on these certifies that they are compiled from the same code on his git - I made no mods except what I needed to in order to make it cross-build for Win64. It does NOT certify that I vouch for the code, as I've not gone over it. Anyways, yeah, have some:
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip.sig
Now I have to go diff the bugfixes done by ocminer and the bugfixes done by one of the Decred devs against my own private copy of cgminer that's been heavily edited and merge in the bug fixes, so I'll be busy for a bit.
linux please wolf? ...
#crysx
Compile it yourself, please. You're a linux user, you're better than that.
February 03, 2016, 04:51:29 AM
When the main net launches, I thought that it was on 3rd February, as the test net was launched on about 27th January and it was previously being said that it will be launched about a week later after the launch of test net if no major bug is found.
According to the last announcement on the Official Forum https://forum.decred.org (that i suggest to stick and keep under the radar) "The Mainnet launch is scheduled for 12:00 PM CST February 8th, 2016!"
There you will stay tuned with all info and other announcement, and ask for all technical support you need. The community is very friendly here
February 03, 2016, 04:46:32 AM
When the main net launches, I thought that it was on 3rd February, as the test net was launched on about 27th January and it was previously being said that it will be launched about a week later after the launch of test net if no major bug is found.
February 03, 2016, 03:51:14 AM
What's a normal hashrate for one 280x? I keep getting 1.4/1.5, but according to dr. Google i could get ~2-2.5?
Core 1100 Mem 1500
Intensity at 14
I don't get it.
Core 1100 Mem 1500
Intensity at 14
I don't get it.
I get 1.4-1.5 too . This is 14 round blake, not 8 round, don't forget that
Thanks for your efforts. I can't make a connection to your pool yet, I use this line to start cgminer:
cgminer --blake256 -u username.worker -p x -o stratum+tcp://dcr.suprnova.cc:9110
Where username.worker is of course my own ;-) Am I doing anything wrong here?
Quote
[2016-02-03 09:52:31] Pool: 0 URL: stratum+tcp://dcr.suprnova.cc:9110 User: username.worker Password: x
[2016-02-03 09:52:31] Press any key to exit, or cgminer will try again in 15s.
[2016-02-03 09:53:46] No servers were found that could be used to get work from
.
[2016-02-03 09:53:46] Please check the details from the list below of the serve
rs you have input
[2016-02-03 09:52:31] Press any key to exit, or cgminer will try again in 15s.
[2016-02-03 09:53:46] No servers were found that could be used to get work from
.
[2016-02-03 09:53:46] Please check the details from the list below of the serve
rs you have input
Thanks!
February 02, 2016, 08:35:28 PM
What's a normal hashrate for one 280x? I keep getting 1.4/1.5, but according to dr. Google i could get ~2-2.5?
Core 1100 Mem 1500
Intensity at 14
I don't get it.
Core 1100 Mem 1500
Intensity at 14
I don't get it.
I get 1.4-1.5 too . This is 14 round blake, not 8 round, don't forget that
Ocminer, as soon as you have a windows.exe miner let us know and post link. I can test with AMD 280x or Nvidia 980M if a miner is available.
Here, I made binaries of OCMiner's git. My signature on these certifies that they are compiled from the same code on his git - I made no mods except what I needed to in order to make it cross-build for Win64. It does NOT certify that I vouch for the code, as I've not gone over it. Anyways, yeah, have some:
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip.sig
Now I have to go diff the bugfixes done by ocminer and the bugfixes done by one of the Decred devs against my own private copy of cgminer that's been heavily edited and merge in the bug fixes, so I'll be busy for a bit.
February 03, 2016, 02:36:54 AM
windows NVidia ccminer ?
February 02, 2016, 11:19:47 PM
What's a normal hashrate for one 280x? I keep getting 1.4/1.5, but according to dr. Google i could get ~2-2.5?
Core 1100 Mem 1500
Intensity at 14
I don't get it.
Core 1100 Mem 1500
Intensity at 14
I don't get it.
I get 1.4-1.5 too . This is 14 round blake, not 8 round, don't forget that
Ocminer, as soon as you have a windows.exe miner let us know and post link. I can test with AMD 280x or Nvidia 980M if a miner is available.
Here, I made binaries of OCMiner's git. My signature on these certifies that they are compiled from the same code on his git - I made no mods except what I needed to in order to make it cross-build for Win64. It does NOT certify that I vouch for the code, as I've not gone over it. Anyways, yeah, have some:
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip.sig
Now I have to go diff the bugfixes done by ocminer and the bugfixes done by one of the Decred devs against my own private copy of cgminer that's been heavily edited and merge in the bug fixes, so I'll be busy for a bit.
linux please wolf? ...
#crysx
Thanks a lot Wolf, my changes are only in "cgminer.c" - the endianness of "roll_work" was switched, so it isn't too much, but I've noticed a few other places in the code where the endianness *SHOULD* be obviously wrong too but I did not change it (for now) as the miner is working and I'm by far no expert with miner coding
IMHO the code needs a major cleanup, I like ccminer/cpuminer much more for coding such things, it's much easier to understand (for me).
@crysx you need a compiled linux version ? It's as easy as "sh autogen.sh" then "./configure" and "make"
no - i never need the compiled version guys ...
im looking for the git ...
ocminer - yours in cloned and setup - but refuses to compile ...
wolf - i was asking for the git for your version so that i can compile ...
one of the two of your should work ...
and im looking for a ccminer version - as thefarm will be sitting there idly by if i dont get a nvidia version compiled ...
#crysx
Mine's not on git... also, there's not a ccminer version, but you know CGMiner runs on Nvidia, too.
it doesnt compile - at all ...
cgminer crashes on almost every compile ...
i shut the worker down for now - as it was an adhock setup on a small table in the corner of the office ( i am a few days away from setting farmamd back up ) ...
ill try again when i get back in a few hours ...
and no - i didnt know cgminer runs off nvidia also ... i thought it required a cuda installation for it - unless it runs off just opencl ...
tanx guys ...
#crysx
February 02, 2016, 11:14:27 PM
What's a normal hashrate for one 280x? I keep getting 1.4/1.5, but according to dr. Google i could get ~2-2.5?
Core 1100 Mem 1500
Intensity at 14
I don't get it.
Core 1100 Mem 1500
Intensity at 14
I don't get it.
I get 1.4-1.5 too . This is 14 round blake, not 8 round, don't forget that
Ocminer, as soon as you have a windows.exe miner let us know and post link. I can test with AMD 280x or Nvidia 980M if a miner is available.
Here, I made binaries of OCMiner's git. My signature on these certifies that they are compiled from the same code on his git - I made no mods except what I needed to in order to make it cross-build for Win64. It does NOT certify that I vouch for the code, as I've not gone over it. Anyways, yeah, have some:
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip.sig
Now I have to go diff the bugfixes done by ocminer and the bugfixes done by one of the Decred devs against my own private copy of cgminer that's been heavily edited and merge in the bug fixes, so I'll be busy for a bit.
linux please wolf? ...
#crysx
Thanks a lot Wolf, my changes are only in "cgminer.c" - the endianness of "roll_work" was switched, so it isn't too much, but I've noticed a few other places in the code where the endianness *SHOULD* be obviously wrong too but I did not change it (for now) as the miner is working and I'm by far no expert with miner coding
IMHO the code needs a major cleanup, I like ccminer/cpuminer much more for coding such things, it's much easier to understand (for me).
@crysx you need a compiled linux version ? It's as easy as "sh autogen.sh" then "./configure" and "make"
no - i never need the compiled version guys ...
im looking for the git ...
ocminer - yours in cloned and setup - but refuses to compile ...
wolf - i was asking for the git for your version so that i can compile ...
one of the two of your code should work ...
and im looking for a ccminer version - as thefarm will be sitting there idly by if i dont get a nvidia version compiled ...
#crysx
February 02, 2016, 11:08:25 PM
What's a normal hashrate for one 280x? I keep getting 1.4/1.5, but according to dr. Google i could get ~2-2.5?
Core 1100 Mem 1500
Intensity at 14
I don't get it.
Core 1100 Mem 1500
Intensity at 14
I don't get it.
I get 1.4-1.5 too . This is 14 round blake, not 8 round, don't forget that
Ocminer, as soon as you have a windows.exe miner let us know and post link. I can test with AMD 280x or Nvidia 980M if a miner is available.
Here, I made binaries of OCMiner's git. My signature on these certifies that they are compiled from the same code on his git - I made no mods except what I needed to in order to make it cross-build for Win64. It does NOT certify that I vouch for the code, as I've not gone over it. Anyways, yeah, have some:
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip.sig
Now I have to go diff the bugfixes done by ocminer and the bugfixes done by one of the Decred devs against my own private copy of cgminer that's been heavily edited and merge in the bug fixes, so I'll be busy for a bit.
linux please wolf? ...
#crysx
Thanks a lot Wolf, my changes are only in "cgminer.c" - the endianness of "roll_work" was switched, so it isn't too much, but I've noticed a few other places in the code where the endianness *SHOULD* be obviously wrong too but I did not change it (for now) as the miner is working and I'm by far no expert with miner coding
IMHO the code needs a major cleanup, I like ccminer/cpuminer much more for coding such things, it's much easier to understand (for me).
@crysx you need a compiled linux version ? It's as easy as "sh autogen.sh" then "./configure" and "make"
OC please check your PM, we'd like to have a pool up and running for launch too and need your help.
February 02, 2016, 10:55:55 PM
What's a normal hashrate for one 280x? I keep getting 1.4/1.5, but according to dr. Google i could get ~2-2.5?
Core 1100 Mem 1500
Intensity at 14
I don't get it.
Core 1100 Mem 1500
Intensity at 14
I don't get it.
I get 1.4-1.5 too . This is 14 round blake, not 8 round, don't forget that
Ocminer, as soon as you have a windows.exe miner let us know and post link. I can test with AMD 280x or Nvidia 980M if a miner is available.
Here, I made binaries of OCMiner's git. My signature on these certifies that they are compiled from the same code on his git - I made no mods except what I needed to in order to make it cross-build for Win64. It does NOT certify that I vouch for the code, as I've not gone over it. Anyways, yeah, have some:
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip
https://ottrbutt.com/miner/downloads/decred-cgminer/wolf-decred-cgminer-ocminer-02022016-win64.zip.sig
Now I have to go diff the bugfixes done by ocminer and the bugfixes done by one of the Decred devs against my own private copy of cgminer that's been heavily edited and merge in the bug fixes, so I'll be busy for a bit.
linux please wolf? ...
#crysx
Thanks a lot Wolf, my changes are only in "cgminer.c" - the endianness of "roll_work" was switched, so it isn't too much, but I've noticed a few other places in the code where the endianness *SHOULD* be obviously wrong too but I did not change it (for now) as the miner is working and I'm by far no expert with miner coding
IMHO the code needs a major cleanup, I like ccminer/cpuminer much more for coding such things, it's much easier to understand (for me).
@crysx you need a compiled linux version ? It's as easy as "sh autogen.sh" then "./configure" and "make"
Jump to: