do you have "applicable" plotter_id = plotfile names ?
also possible your mining start came right about at the time where the dev restarted / reset the testnet
Lack of communication .. Would it have hurt to inform people about testnet reset ?
SERIOUSLY DISKCOINDEV - you give us a rewind - and for whatever reason YOUR testers are blocked ? .. cant even get blockchain nodes to sync my wallet
this practially a week after planned release ^^
Topic: 🔥🔥[ANN][DISC]Diskcoin|open source|CPOC|Hardisk mining|No ICO|No premine - page 12. (Read 6788 times)
July 20, 2019, 02:16:25 PM
July 20, 2019, 12:15:17 PM
I am still struggling to get the miner to run, can someone tell me what this means in the miner logs?
The miner opens and doesn't do anything. I unplugged the test drives and then it at least appears runs through the config then displays error that no plts were found which makes since and now has me wondering about my plot process? I use that PID gen page to create a PID and used that number in turboplotter to plot the disk? I wonder if I did this correct? detail instruction are non existent for this project. I have been trying for a few weeks not to even get it to run. Could someone provide so clarity for these messages?
Code:
11:58:31 === Config loaded ===
11:58:31 Miner path: C:\Users\dc-test\Downloads\dcminer.0714\dcminer.0714\
11:58:31 Searching servers...
11:58:31 Address: 192.168.1.109 defined as: 192.168.1.109
11:58:31 Address: 192.168.1.109 defined as: 192.168.1.109
11:58:31 Address: 192.168.1.109 defined as: 192.168.1.109
11:58:31 Updater thread started
11:58:31 Update mining info
11:58:31 *! GMI: get mining info failed:: 10054
11:58:32 *! GMI: get mining info failed:: 10054
11:58:33 *! GMI: get mining info failed:: 10054
11:58:34 *! GMI: get mining info failed:: 10054
11:58:35 *! GMI: get mining info failed:: 10054
11:58:36 *! GMI: get mining info failed:: 10054
11:58:37 *! GMI: get mining info failed:: 10054
11:58:38 * GMI: Received:
11:58:38 *! GMI: error message from pool
11:58:39 *! GMI: get mining info failed:: 10054
11:58:40 *! GMI: get mining info failed:: 10054
11:58:31 Miner path: C:\Users\dc-test\Downloads\dcminer.0714\dcminer.0714\
11:58:31 Searching servers...
11:58:31 Address: 192.168.1.109 defined as: 192.168.1.109
11:58:31 Address: 192.168.1.109 defined as: 192.168.1.109
11:58:31 Address: 192.168.1.109 defined as: 192.168.1.109
11:58:31 Updater thread started
11:58:31 Update mining info
11:58:31 *! GMI: get mining info failed:: 10054
11:58:32 *! GMI: get mining info failed:: 10054
11:58:33 *! GMI: get mining info failed:: 10054
11:58:34 *! GMI: get mining info failed:: 10054
11:58:35 *! GMI: get mining info failed:: 10054
11:58:36 *! GMI: get mining info failed:: 10054
11:58:37 *! GMI: get mining info failed:: 10054
11:58:38 * GMI: Received:
11:58:38 *! GMI: error message from pool
11:58:39 *! GMI: get mining info failed:: 10054
11:58:40 *! GMI: get mining info failed:: 10054
The miner opens and doesn't do anything. I unplugged the test drives and then it at least appears runs through the config then displays error that no plts were found which makes since and now has me wondering about my plot process? I use that PID gen page to create a PID and used that number in turboplotter to plot the disk? I wonder if I did this correct? detail instruction are non existent for this project. I have been trying for a few weeks not to even get it to run. Could someone provide so clarity for these messages?
July 20, 2019, 10:23:45 AM
another service .. when do you finally offer a "useful" communication channel ... like discord
Yes, there must be a discord in order to communicate.
July 20, 2019, 09:45:02 AM
another service .. when do you finally offer a "useful" communication channel ... like discord
July 20, 2019, 05:35:01 AM
Update: Our Diskcoin group has been established in Telegram.
https://t.me/Diskcoingroup
https://t.me/Diskcoingroup
July 20, 2019, 05:13:38 AM
@jecsoon2
the full block reward is always 20 disk
unpledged you receive 8 as forger - and 12 go to the dev-wallet - like in bhd or boom
if you pledge you receive more ... but unfortunately there was never revealed how much per TByte must be pledged to receive full reward
we tested on 0708 an 0710 with some sheath of hand and pledged our testpool to some 100 k disk -
which made us earn even above "ceiling" of 20 disk
the actual payment seems to hint to some asymptotic graph .. with moderate pledge of ~400 we get over 10 disk
but when ever you check your earnings vs pledge keep in mind that earnings are "delayed" by 100 blocks until they are "mature" ... depending on blocktime this can take some hours
the full block reward is always 20 disk
unpledged you receive 8 as forger - and 12 go to the dev-wallet - like in bhd or boom
if you pledge you receive more ... but unfortunately there was never revealed how much per TByte must be pledged to receive full reward
we tested on 0708 an 0710 with some sheath of hand and pledged our testpool to some 100 k disk -
which made us earn even above "ceiling" of 20 disk
the actual payment seems to hint to some asymptotic graph .. with moderate pledge of ~400 we get over 10 disk
but when ever you check your earnings vs pledge keep in mind that earnings are "delayed" by 100 blocks until they are "mature" ... depending on blocktime this can take some hours
July 20, 2019, 05:11:47 AM
No update......
July 20, 2019, 04:43:52 AM
Update: Staking tutorial for solo mining
From the block height of 1801, if you want to Stake, you need to do the corresponding operation in your wallet. The more DISCs you Stake, the more reward you will get.
Staking:
Command:
How to check the default wallet address:
Command:
Check the Staking records of the address:
Command:
Maxconf: maximum confirmation
Cancel the Staking:
Command:
You could use the listpledgein command to get the txid that has been Staked.
After the Staking is successful, it will take effect after 900 blocks.
From the block height of 1801, if you want to Stake, you need to do the corresponding operation in your wallet. The more DISCs you Stake, the more reward you will get.
Staking:
Command:
Code:
./diskcoin-cli pledgeto the-wallet-address-you-Stake-to the-Stake-amount
The Staking address needs to be the address that generated blocks. How to check the default wallet address:
Command:
Code:
./diskcoin-cli getaccountaddress ""
A hash will be returned after the Staking.Check the Staking records of the address:
Command:
Code:
listpledgein (minconf maxconf ["address",...])
Minconf: minimum confirmationMaxconf: maximum confirmation
Cancel the Staking:
Command:
Code:
./diskcoin-cli unpledge txid
You could use the listpledgein command to get the txid that has been Staked.
After the Staking is successful, it will take effect after 900 blocks.
My 10T capacity mortgaged 440disc, but the explosive block or 8disc, what's the problem?
This command is used. ./diskcoin-cli pledgeto “185FNCrmjzudXGsCojcrkCWFefPxCW7FKB” 440
aee2d665514a19a5f3dc6ba88f2fc5900069993735e8289d154f37578b9b8b84
6a77c0d237b89cff110016b39f8c9872e14fe65d5467cef9c055bbc565cc2629
The reward for the first block is eight Diskcoins, the subsequent rewards will be calculated according to staking formula and will increase accordingly. Is the reward always only 8 Diskcoins? Or is it just the first one?
July 20, 2019, 04:31:25 AM
try to unpledge and get these error
error code: -26
error message:
256: absurdly-high-fee
error code: -26
error message:
256: absurdly-high-fee
Understand your concern, and now we are trying to fix this bug.
July 20, 2019, 04:27:07 AM
no windows wallet?
The Diskcoin-QT wallet for Win will release when the mainnet is online.
I find a serious question. so many times, The deadline i sent is only less than 100, but finally, The block owner is not me, The producer's deanline is greater than 100.
what’s the problem？ I have nearly 50T，The full network capacity is almost 500T，But i just got three rewards in three days.
July 20, 2019, 03:56:12 AM
no windows wallet?
The Diskcoin-QT wallet for Win will release when the mainnet is online.
I find a serious question. so many times, The deadline i sent is only less than 100, but finally, The block owner is not me, The producer's deanline is greater than 100.
what’s the problem？ I have nearly 50T，The full network capacity is almost 500T，But i just got three rewards in three days.
July 20, 2019, 12:22:34 AM
no windows wallet?
The Diskcoin-QT wallet for Win will release when the mainnet is online.
I find a serious question. so many times, The deadline i sent is only less than 100, but finally, The block owner is not me, The producer's deanline is greater than 100.
what’s the problem？ I have nearly 50T，The full network capacity is almost 500T，But i just got three rewards in three days.
July 19, 2019, 06:25:13 PM
Update: Staking tutorial for solo mining
From the block height of 1801, if you want to Stake, you need to do the corresponding operation in your wallet. The more DISCs you Stake, the more reward you will get.
Staking:
Command:
How to check the default wallet address:
Command:
Check the Staking records of the address:
Command:
Maxconf: maximum confirmation
Cancel the Staking:
Command:
You could use the listpledgein command to get the txid that has been Staked.
After the Staking is successful, it will take effect after 900 blocks.
From the block height of 1801, if you want to Stake, you need to do the corresponding operation in your wallet. The more DISCs you Stake, the more reward you will get.
Staking:
Command:
Code:
./diskcoin-cli pledgeto the-wallet-address-you-Stake-to the-Stake-amount
The Staking address needs to be the address that generated blocks. How to check the default wallet address:
Command:
Code:
./diskcoin-cli getaccountaddress ""
A hash will be returned after the Staking.Check the Staking records of the address:
Command:
Code:
listpledgein (minconf maxconf ["address",...])
Minconf: minimum confirmationMaxconf: maximum confirmation
Cancel the Staking:
Command:
Code:
./diskcoin-cli unpledge txid
You could use the listpledgein command to get the txid that has been Staked.
After the Staking is successful, it will take effect after 900 blocks.
My 10T capacity mortgaged 440disc, but the explosive block or 8disc, what's the problem?
This command is used. ./diskcoin-cli pledgeto “185FNCrmjzudXGsCojcrkCWFefPxCW7FKB” 440
aee2d665514a19a5f3dc6ba88f2fc5900069993735e8289d154f37578b9b8b84
6a77c0d237b89cff110016b39f8c9872e14fe65d5467cef9c055bbc565cc2629
July 18, 2019, 08:43:37 PM
try to unpledge and get these error
error code: -26
error message:
256: absurdly-high-fee
error code: -26
error message:
256: absurdly-high-fee
July 18, 2019, 07:25:36 AM
Update: Sorry to inform you that the team need to make further testing and fixing some bugs to make sure that there is no problem, so the mainnet would be postponed to this weekend. Thanks for your attention to Diskcoin!
I have already guessed that you are not a team.
Just a young Chinese is operating this coin!
July 18, 2019, 07:04:37 AM
Update: Sorry to inform you that the team need to make further testing and fixing some bugs to make sure that there is no problem, so the mainnet would be postponed to this weekend. Thanks for your attention to Diskcoin!
I have already guessed that you are not a team.
Just a young Chinese is operating this coin!
July 18, 2019, 05:38:40 AM
no windows wallet?
The Diskcoin-QT wallet for Win will release when the mainnet is online.
July 18, 2019, 04:41:05 AM
Update: Sorry to inform you that the team need to make further testing and fixing some bugs to make sure that there is no problem, so the mainnet would be postponed to this weekend. Thanks for your attention to Diskcoin!
July 18, 2019, 01:54:39 AM
no windows wallet?
July 18, 2019, 01:14:56 AM
تأخير again?
Jump to: