Topic: [ANN][EGC] EverGreenCoin | Environmental Green Causes | Full 7% PoS | Foundation - page 145. (Read 284546 times)

I have verified Cryptopia's EGC wallet functionality with both sending and receiving EverGreenCoin. All looks well.

I were out of home, but take a look a screenshot link. It's taken from my phone, while remote to check your suggestions.
Restored wallet from backup and relaunched. And then getblockhash 423800 and 423796.
https://drive.google.com/file/d/0B9xxZUmROfnpWThHcWYzN0F6MlE/view?usp=drivesdk

my blocks was stuck at 416933 at when i tried to use debug window and type getblockhash I got this answer

getblockhash
Returns hash of block in best-block-chain at . (code -1)
 

I dont know what is the meaning of it..

This does sound very odd. Perhaps verify you have not forked a bit more recently. Use the block explorer found at http://transactions.evergreencoin.org and see if you have a block height that is very close to the block height it is at. It would be normal for the block explorer to be displaying a height of a few blocks lower. Try also to compare the block hash of a very recent block.

For example, 423800 has passed just a few minutes ago and since you first reported your issue.

getblockhash 423800
should return
91c8e19eea532e9cd493aecc8e4153198c95b6b8972b8338c25beb16287a5b72

If all those test indicate you are on the correct chain, perhaps close the wallet, restore your backup wallet.dat, and relaunch the wallet.

EDIT: by "few blocks lower" I mean 2 to 4 blocks.

Yes, already run "repairwallet". Nothing happen, same result.

If you have a twitter account and would be so kind, please retweet this: https://twitter.com/EverGreenCoin_/status/734300145047724032  in an effort to get more wallets on the correct chain.

Thank you in advance!

Have you tried "repairwallet" from the debug console? This will force the wallet to reconcile itself.

I hope that is a resolution for you.

@Dev,  I have problem with my wallet.

I was in the right chain, but seems everything are gone.
I'm using the latest wallet version. And try to get blockhash as crysx mention on earlier post.
I had download the bootstrap.dat blockchain, the  extract it and put in wallet blockchain data dir, and it's done imported, and sync'd.
I've tried to mine see if it's ok and back as previously.
Then I left it alone for few hours, while I'm going out.

When I'm back, I need to restart whole system in Win10 after updating my drivers. When it's back and open my wallet were sync as usual, but it's strange that have more unsync'd blocks, about 1,500 blocks.
When it's done sync'd, I got unconfirmed and empty on my wallet.

I tried once more to clear everything except wallet.dat (already backup also), but all transactions are gone, left only one the last transaction, which I've done successfull sent it to test, see if yobit is back or not.

I hope you might have some explanations for this issue..

Here the screenshots:
https://drive.google.com/file/d/0B9xxZUmROfnpNHNvYkNYaUlsR2c/view?usp=drivesdk

https://drive.google.com/file/d/0B9xxZUmROfnpVWdSSExUQkxqZ0U/view?usp=drivesdk

https://drive.google.com/file/d/0B9xxZUmROfnpTmdjSnBDX3JzX00/view?usp=drivesdk

Thanks!

Some good news from Cryptopia's staff to share with you all:

EGC does have some pressing issues going on so, please don't misinterpret that as you being ignored, as I have asked of you both publicly in this thread and privately in my multiple PMs to you. Since these polite requests clearly do not appease you, let me address your concerns to the best of my ability now.

The "10 EGC to [the] foundation" issue would not be a normal occurrence of the code and is unexpected. I see presently, and to the best of my knowledge, mined blocks are paying only 1 EGC to the foundation and 49 to the miner, as designed and hardcoded. Further investigation will be needed and the tx id you cited yesterday appears to be an invalid tx. I will investigate this more, when time is permitting and there is not much more urgent issues that demand my attention.

About "missing EGC", it is your responsibility to maintain your wallet. Not mine nor someone else's. That said, I have clearly stated, again both publicly and privately to you specifically, myself and the foundation will graciously be replacing any coins that are deemed sufficiently proven to be in-fact missing, even though it is of no fault of mine, the foundation's, nor the wallet's. Those cases will be individually investigated in the order they were received, again time permitting and after order is restored.

C-Cex's admin is leaving for the day while the EGC wallet resyncs. He will verify his blockchain is correct and conduct any internal audits in the morning.

kool ...

was just curious mate ...

with X and quark - i use ccminer-spmod80 - as it does seem to be the fastest in those algos ... though i am moving more away from spmod altogether ...

tanx ...

#crysx

Hey crysx, I'm using a somewhat older version of SP-mod (1.5.72).

2.06 Mh/s per 750 Ti and 6.08 Mh/s per 970 with medium OC on both.

Steve,

still no answere about my questions ....
What about 10 EGC to Foundation Wallet at Mining ?
What about missing EGC in Wallet ?

FYI: C-Cex needs to resync again.

awesome ...

are you using ccminer-spmod(xxx) to mine the Xseries? ...

if so - which are you using? ...

#crysx

I'm back on the right fork, I have two wallets running and the one that went on the wrong fork was the one I was mining to.

Cryptopia needs to resync again, they are doing so now. I have asked them to remove any existing peers.dat file before attempting to do so. My apologies for this delay. Many wallets are still running on incorrect forks.

Yes, sorry to say you have. 

block 423211
e977fe02d57c9e06227c8d9dffdcd132ad11ec2ffa924c0442b562e6ba883f25

I think I forked again.

14 blocks remaining but it wouldn't sync.


getblockhash 423211

000000003b7ab89c140ac26ae1935a27003fc953d788617c29f12bc51ca176dd