[ANN][ENT] Eternity - X11 - No Premine - page 24.

qf3l3k

member

Activity: 350

Merit: 15

Quote from: luizricky on October 20, 2017, 04:51:21 AM

What happens? all my coins are gone witch recync!

Don't worry. It's normal. It will come back once block with your transaction will be synchronized.
I had exactly the same situation.

Just let it synchronize.

luizricky

newbie

Activity: 9

Merit: 0

What happens? all my coins are gone witch recync!

qf3l3k

member

Activity: 350

Merit: 15

Removed and re-synched blockchain and now seems to be fine and stable.

crowi

newbie

Activity: 21

Merit: 0

All our mined blocks and masternode rewards from the past 3 days have diappeared!
What is happening here? Angry

All nodes and clients were updated a few days ago to the new core.

johnnysof

hero member

Activity: 534

Merit: 500

Quote from: citizen Z on October 20, 2017, 03:42:22 AM

same problem here

i don t see my coins in my wallet my masternode doesnt start i m freaking out

what do you think about that mess ?
do you have any clue about my coin ?

09:38:21
getinfo
09:38:21
{
"version": 120105,
"protocolversion": 70206,
"walletversion": 61000,
"balance": 0.00000000,
"spysend_balance": 0.00000000,
"blocks": 212426,
"timeoffset": 13,
"connections": 8,
"proxy": "",
"difficulty": 1429.935633113073,
"testnet": false,
"keypoololdest": 1508192549,
"keypoolsize": 1001,
"unlocked_until": 0,
"paytxfee": 0.00000000,
"relayfee": 0.00010000,
"errors": ""
}

Looks like someone did a rewind on the blockchain and applied his own one. Thus all further blocks were orphaned and all transactions and coins after that do not exists anymore. The strange thing is that I was synced yesterday with the chain, but the rewind goes to 3 days ago, that is very strange.

citizen Z

member

Activity: 71

Merit: 10

same problem here

i don t see my coins in my wallet my masternode doesnt start i m freaking out

what do you think about that mess ?
do you have any clue about my coin ?

09:38:21
getinfo
09:38:21
{
"version": 120105,
"protocolversion": 70206,
"walletversion": 61000,
"balance": 0.00000000,
"spysend_balance": 0.00000000,
"blocks": 212426,
"timeoffset": 13,
"connections": 8,
"proxy": "",
"difficulty": 1429.935633113073,
"testnet": false,
"keypoololdest": 1508192549,
"keypoolsize": 1001,
"unlocked_until": 0,
"paytxfee": 0.00000000,
"relayfee": 0.00010000,
"errors": ""
}

johnnysof

hero member

Activity: 534

Merit: 500

Even worst than the post above. Current status:
{
"version": 120105,
"protocolversion": 70206,
"walletversion": 61000,
"balance": 0.00000000,
"spysend_balance": 0.00000000,
"blocks": 211979,
"timeoffset": 0,
"connections": 17,
"proxy": "",
"difficulty": 2403.020523215836,
"testnet": false,
"keypoololdest": 1508413178,
"keypoolsize": 1001,
"paytxfee": 0.00000000,
"relayfee": 0.00010000,
"errors": "Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade."
}

After wallet restart:
{
"version": 120105,
"protocolversion": 70206,
"walletversion": 61000,
"balance": 0.00000000,
"spysend_balance": 0.00000000,
"blocks": 212426,
"timeoffset": 0,
"connections": 8,
"proxy": "",
"difficulty": 1429.935633113073,
"testnet": false,
"keypoololdest": 1508363891,
"keypoolsize": 1001,
"paytxfee": 0.00000000,
"relayfee": 0.00010000,
"errors": ""
}

Dev, this here gets a big mess and users are probably losing coins. You have to fix this asap!

nars28

newbie

Activity: 25

Merit: 0

The new wallet is awesome. Synced from the scratch and set up 7 MN's. First day payment was 3 ent on average per MN.

qf3l3k

member

Activity: 350

Merit: 15

Something is still not right.

Here is what I got:

{
"version": 120105,
"protocolversion": 70206,
"walletversion": 61000,
"balance": 0.00000000,
"spysend_balance": 0.00000000,
"blocks": 212767,
"timeoffset": 0,
"connections": 26,
"proxy": "",
"difficulty": 640.6870111946021,
"testnet": false,
"keypoololdest": 1506766687,
"keypoolsize": 1004,
"paytxfee": 0.00000000,
"relayfee": 0.00010000,
"errors": "Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade."
}

and node is upgraded.

Juudai

sr. member

Activity: 308

Merit: 250

Quote from: johnnysof on October 19, 2017, 09:46:05 PM

Quote from: Juudai on October 19, 2017, 08:45:46 PM

Quote from: johnnysof on October 19, 2017, 08:17:28 PM

Could please someone post the actual block hight. I have a different one than the block explorer, but a lot of connections (>20) and see a lot of nodes in the list (100). So, why is the block explorer on a different high and still moving or is something wrong on my site?
Thanks.

For me looks like there are again several chains circulating.

EDIT: It's also strange with the exchanges. Yobit is offline, live and tradesatoshi has different block heights, I generated an address on live, but it does not appear in the explorer, even if both have same block height Huh

Delete everything again and try to sync without adding the nodes from the explorer list. I'm running the latest mac build and it seems to sync fine without adding custom nodes to the correct chain.

EDIT: Exchanges don't seem to have updated to the latest version yet that's why they are on different block heights, so for now don't send any ENT to exchanges.

Thanks, just started re downloading again.
What is your block height?

Code:

getinfo
{
"version": 120105,
"protocolversion": 70206,
"walletversion": 61000,
"balance": 0.99995500,
"spysend_balance": 0.00000000,
"blocks": 213587,
"timeoffset": 0,
"connections": 8,
"proxy": "",
"difficulty": 4496.949710492425,
"testnet": false,
"keypoololdest": 1508346628,
"keypoolsize": 1001,
"paytxfee": 0.00000000,
"relayfee": 0.00010000,
"errors": ""
}

johnnysof

hero member

Activity: 534

Merit: 500

Quote from: Juudai on October 19, 2017, 08:45:46 PM

Quote from: johnnysof on October 19, 2017, 08:17:28 PM

Could please someone post the actual block hight. I have a different one than the block explorer, but a lot of connections (>20) and see a lot of nodes in the list (100). So, why is the block explorer on a different high and still moving or is something wrong on my site?
Thanks.

For me looks like there are again several chains circulating.

EDIT: It's also strange with the exchanges. Yobit is offline, live and tradesatoshi has different block heights, I generated an address on live, but it does not appear in the explorer, even if both have same block height Huh

Delete everything again and try to sync without adding the nodes from the explorer list. I'm running the latest mac build and it seems to sync fine without adding custom nodes to the correct chain.

EDIT: Exchanges don't seem to have updated to the latest version yet that's why they are on different block heights, so for now don't send any ENT to exchanges.

Thanks, just started re downloading again.
What is your block height?

Juudai

sr. member

Activity: 308

Merit: 250

Quote from: johnnysof on October 19, 2017, 09:03:20 PM

Quote from: Juudai on October 19, 2017, 08:45:46 PM

Quote from: johnnysof on October 19, 2017, 08:17:28 PM

Could please someone post the actual block hight. I have a different one than the block explorer, but a lot of connections (>20) and see a lot of nodes in the list (100). So, why is the block explorer on a different high and still moving or is something wrong on my site?
Thanks.

Code:

{
  "version": 120105,
  "protocolversion": 70206,
  "walletversion": 61000,
  "balance": 0.99995500,
  "spysend_balance": 0.00000000,
  "blocks": 213557,
  "timeoffset": 0,
  "connections": 16,
  "proxy": "",
  "difficulty": 4354.537146217448,
  "testnet": false,
  "keypoololdest": 1508346628,
  "keypoolsize": 1001,
  "paytxfee": 0.00000000,
  "relayfee": 0.00010000,
  "errors": ""
}

Thanks. I really don't understand it. Just deleted everything and downloaded the chain from scratch. Add all the nodes from the explorer list, all synced fine, have a lot of connections and see also 10s of nodes, but my hight is 213779 Huh

Code:

{
  "version": 120105,
  "protocolversion": 70206,
  "walletversion": 61000,
  "balance": 0.00000000,
  "spysend_balance": 0.00000000,
  "blocks": 213779,
  "timeoffset": 0,
  "connections": 25,
  "proxy": "",
  "difficulty": 4447.942103971342,
  "testnet": false,
  "keypoololdest": 1508413178,
  "keypoolsize": 1001,
  "paytxfee": 0.00000000,
  "relayfee": 0.00010000,
  "errors": ""
}

For me looks like there are again several chains circulating.

EDIT: It's also strange with the exchanges. Yobit is offline, live and tradesatoshi has different block heights, I generated an address on live, but it does not appear in the explorer, even if both have same block height Huh

Delete everything again and try to sync without adding the nodes from the explorer list. I'm running the latest mac build and it seems to sync fine without adding custom nodes to the correct chain.

EDIT: Exchanges don't seem to have updated to the latest version yet that's why they are on different block heights, so for now don't send any ENT to exchanges.

johnnysof

hero member

Activity: 534

Merit: 500

Quote from: Juudai on October 19, 2017, 08:45:46 PM

Quote from: johnnysof on October 19, 2017, 08:17:28 PM

Could please someone post the actual block hight. I have a different one than the block explorer, but a lot of connections (>20) and see a lot of nodes in the list (100). So, why is the block explorer on a different high and still moving or is something wrong on my site?
Thanks.

Code:

{
  "version": 120105,
  "protocolversion": 70206,
  "walletversion": 61000,
  "balance": 0.99995500,
  "spysend_balance": 0.00000000,
  "blocks": 213557,
  "timeoffset": 0,
  "connections": 16,
  "proxy": "",
  "difficulty": 4354.537146217448,
  "testnet": false,
  "keypoololdest": 1508346628,
  "keypoolsize": 1001,
  "paytxfee": 0.00000000,
  "relayfee": 0.00010000,
  "errors": ""
}

Thanks. I really don't understand it. Just deleted everything and downloaded the chain from scratch. Add all the nodes from the explorer list, all synced fine, have a lot of connections and see also 10s of nodes, but my hight is 213779 Huh

Code:

{
  "version": 120105,
  "protocolversion": 70206,
  "walletversion": 61000,
  "balance": 0.00000000,
  "spysend_balance": 0.00000000,
  "blocks": 213779,
  "timeoffset": 0,
  "connections": 25,
  "proxy": "",
  "difficulty": 4447.942103971342,
  "testnet": false,
  "keypoololdest": 1508413178,
  "keypoolsize": 1001,
  "paytxfee": 0.00000000,
  "relayfee": 0.00010000,
  "errors": ""
}

For me looks like there are again several chains circulating.

EDIT: It's also strange with the exchanges. Yobit is offline, live and tradesatoshi has different block heights, I generated an address on live, but it does not appear in the explorer, even if both have same block height Huh

Juudai

sr. member

Activity: 308

Merit: 250

Quote from: johnnysof on October 19, 2017, 08:17:28 PM

Could please someone post the actual block hight. I have a different one than the block explorer, but a lot of connections (>20) and see a lot of nodes in the list (100). So, why is the block explorer on a different high and still moving or is something wrong on my site?
Thanks.

Code:

{
"version": 120105,
"protocolversion": 70206,
"walletversion": 61000,
"balance": 0.99995500,
"spysend_balance": 0.00000000,
"blocks": 213557,
"timeoffset": 0,
"connections": 16,
"proxy": "",
"difficulty": 4354.537146217448,
"testnet": false,
"keypoololdest": 1508346628,
"keypoolsize": 1001,
"paytxfee": 0.00000000,
"relayfee": 0.00010000,
"errors": ""
}

johnnysof

hero member

Activity: 534

Merit: 500

Could please someone post the actual block hight. I have a different one than the block explorer, but a lot of connections (>20) and see a lot of nodes in the list (100). So, why is the block explorer on a different high and still moving or is something wrong on my site?
Thanks.

Smokeyw

full member

Activity: 228

Merit: 100

i know only for window ,to start and check your MN is online
eternitynode start-all
eternitynode list-conf
eternitynode status

johnnysof

hero member

Activity: 534

Merit: 500

Looking on the OP it says POW/POS coin, but I can't find anything in the wallet about POS as well as no information how to activate it.
Did someone try to stake successfully? Also is strange, that the wallet can't be unlocked for staking only.

citizen Z

member

Activity: 71

Merit: 10

last update

when i type :

eternitynode status

"overall": "Successfully started 1 eternitynodes, failed to start 0, total 1",
"detail": {
"status": {
"alias": "mn1",
"result": "successful"

LOOK's GOOD Huh

citizen Z

member

Activity: 71

Merit: 10

Quote from: citizen Z on Today at 07:07:49 PM
hello

i try to setup a masternode and i m lost.

do you have a clear link to how setup a masternode Huh

if not can someone help me?

when i start my wallet i do all the operation ( genkey sendtoadress ...)

when i fill the eternitynode.conf the wallet give me a message ( in french l'option eternitynodeaddr est obselete. veuillez utiliser eternitynodes.conf pour gerer vos eterniynode distantes )

i assume the command aternitynodeadress is not valid if someone know what i heve to do ?

just remove the eternitynodeaddr from the config file and you are done

first thanks you for your answer ?

i removed the etenertynodeaddr and the wallet start.

now i don t know how to check if my masternode is on.(goldminenode status on a other coin)

Smokeyw

full member

Activity: 228

Merit: 100

Quote from: citizen Z on October 19, 2017, 03:07:49 PM

hello

i try to setup a masternode and i m lost.

do you have a clear link to how setup a masternode Huh

if not can someone help me?

when i start my wallet i do all the operation ( genkey sendtoadress ...)

when i fill the eternitynode.conf the wallet give me a message ( in french l'option eternitynodeaddr est obselete. veuillez utiliser eternitynodes.conf pour gerer vos eterniynode distantes )

i assume the command aternitynodeadress is not valid if someone know what i heve to do ?

just remove the eternitynodeaddr from the config file and you are done

Topic: [ANN][ENT] Eternity - X11 - No Premine - page 24. (Read 83895 times)