Topic: [ANN][ENT] Eternity - X11 - No Premine - page 28. (Read 83947 times)
Got the new wallet but not syncing past 212592
whats new ?
One IP -> One EternityNode
EternityNode ipv6 support?
Seems that there are some issues.
My Masternode stuck and is generating continuously messages:
2017-10-18 08:21:17 CEternitynodeSync::ProcessTick -- nTick 247 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
2017-10-18 08:21:23 CEternitynodeSync::ProcessTick -- nTick 253 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
2017-10-18 08:21:26 connection from 95.31.211.13:62253 dropped (banned)
2017-10-18 08:21:29 CEternitynodeSync::ProcessTick -- nTick 259 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
2017-10-18 08:21:35 CEternitynodeSync::ProcessTick -- nTick 265 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
2017-10-18 08:21:41 CEternitynodeSync::ProcessTick -- nTick 271 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
Any status? Is there any fix planned?
My Masternode stuck and is generating continuously messages:
2017-10-18 08:21:17 CEternitynodeSync::ProcessTick -- nTick 247 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
2017-10-18 08:21:23 CEternitynodeSync::ProcessTick -- nTick 253 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
2017-10-18 08:21:26 connection from 95.31.211.13:62253 dropped (banned)
2017-10-18 08:21:29 CEternitynodeSync::ProcessTick -- nTick 259 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
2017-10-18 08:21:35 CEternitynodeSync::ProcessTick -- nTick 265 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
2017-10-18 08:21:41 CEternitynodeSync::ProcessTick -- nTick 271 nRequestedEternitynodeAssets 1 nRequestedEternitynodeAttempt 0 nSyncProgress 0.000000
Any status? Is there any fix planned?
Thanks , strangely I have done that 20 times I finally got one node to sync so I went off it, most haven't updated of course and are stuck.
I have this issue too.I Cannot sync block.There's definitively an issue here. No new blocks for almost 5 hours now and both old and new version of the wallet are completely stuck.
im getting error " Error: eternitynodeaddr option is deprecated. Please use eternitynode.conf to manage your remote eternitynodes."
it all ok, i send to other wallet and reconfigure mn still getting error
it all ok, i send to other wallet and reconfigure mn still getting error
Thanks , strangely I have done that 20 times I finally got one node to sync so I went off it, most haven't updated of course and are stuck.
I have this issue too.I Cannot sync block.There's definitively an issue here. No new blocks for almost 5 hours now and both old and new version of the wallet are completely stuck.
Thanks , strangely I have done that 20 times I finally got one node to sync so I went off it, most haven't updated of course and are stuck.
I have this issue too.I Cannot sync block.
Thanks , strangely I have done that 20 times I finally got one node to sync so I went off it, most haven't updated of course and are stuck.
Got the new wallet but not syncing past 212440.
Close it and open it again. It will sync, sometimes it waits for the next block and syncs then.
Got the new wallet but not syncing past 212440.
Is there any pool that works?
My Unomp is sticking at:
"[2017-10-16 21:11:46.459] [DEBUG] [default] - Pool eternity Thread 1 Downloaded 100.00% of blockchain from 8 peers"
and doesn't start the ENT threads.
Everything else is fine, new core and the js snipplet from above added.
Any ideas?
"[2017-10-16 21:11:46.459] [DEBUG] [default] - Pool eternity Thread 1 Downloaded 100.00% of blockchain from 8 peers"
and doesn't start the ENT threads.
Everything else is fine, new core and the js snipplet from above added.
Any ideas?
It is enough to add the above code, for the normal operation of the pool. As an example, http://pool.eternity-group.org works great.
All mined Blocks get orphaned, mining on the new core eternity-0.12.1.5 and with the code implemented.
see: http://37.120.182.204:8081/stats
That is what I‘m talking about, all normal mined blocks start confirming and get rejected afterwards.
Looking on the log file those blocks were replaced by other and mostly several blocks at once (I saw up to 10 blocks replaced on this way).
We have here an fishy miner or something is wrong with code.
Futtermore, dev what men all the status on the eternity nodes: pre-enabled, has to be restarted and so on. I‘m trying to start a node since 2 days without success. And my nose configuration is ok. At least says mastermind successfully started and after a while goes to needs to be restated status. What does this mean?
Thanks.
Edit: looking on the block explorer only one address is mining all the blocks. Quite strange if there are several pools and self mining going on!
is there a way to see payouts from pool http://p2p.eternity-group.org/static/
Im mining and want to see payouts, dont know if pool is working
Im mining and want to see payouts, dont know if pool is working
My Unomp is sticking at:
"[2017-10-16 21:11:46.459] [DEBUG] [default] - Pool eternity Thread 1 Downloaded 100.00% of blockchain from 8 peers"
and doesn't start the ENT threads.
Everything else is fine, new core and the js snipplet from above added.
Any ideas?
"[2017-10-16 21:11:46.459] [DEBUG] [default] - Pool eternity Thread 1 Downloaded 100.00% of blockchain from 8 peers"
and doesn't start the ENT threads.
Everything else is fine, new core and the js snipplet from above added.
Any ideas?
It is enough to add the above code, for the normal operation of the pool. As an example, http://pool.eternity-group.org works great.
All mined Blocks get orphaned, mining on the new core eternity-0.12.1.5 and with the code implemented.
see: http://37.120.182.204:8081/stats
Dev, do you have any checkpoints coded? I noticed a strange behavior in the chain, where mined blocks were canceled even after more than 10 confirmations and rewritten with new ones. Seems someone is manipulating the chain?
No, there is no manipulation, it is necessary to switch to a new version of the wallet, for the stability of the chain.
The blocks were mined with eternity-0.12.1.5, so the latest version. I saw more than 20 blocks, some with more than 10 confirmations, were rejected as well as confirmed transactions have been send again. Something is wrong. Do you have check points implemented or not?
My Unomp is sticking at:
"[2017-10-16 21:11:46.459] [DEBUG] [default] - Pool eternity Thread 1 Downloaded 100.00% of blockchain from 8 peers"
and doesn't start the ENT threads.
Everything else is fine, new core and the js snipplet from above added.
Any ideas?
"[2017-10-16 21:11:46.459] [DEBUG] [default] - Pool eternity Thread 1 Downloaded 100.00% of blockchain from 8 peers"
and doesn't start the ENT threads.
Everything else is fine, new core and the js snipplet from above added.
Any ideas?
It is enough to add the above code, for the normal operation of the pool. As an example, http://pool.eternity-group.org works great.
Dev, do you have any checkpoints coded? I noticed a strange behavior in the chain, where mined blocks were canceled even after more than 10 confirmations and rewritten with new ones. Seems someone is manipulating the chain?
No, there is no manipulation, it is necessary to switch to a new version of the wallet, for the stability of the chain.
Dev, do you have any checkpoints coded? I noticed a strange behavior in the chain, where mined blocks were canceled even after more than 10 confirmations and rewritten with new ones. Seems someone is manipulating the chain?
My Unomp is sticking at:
"[2017-10-16 21:11:46.459] [DEBUG] [default] - Pool eternity Thread 1 Downloaded 100.00% of blockchain from 8 peers"
and doesn't start the ENT threads.
Everything else is fine, new core and the js snipplet from above added.
Any ideas?
"[2017-10-16 21:11:46.459] [DEBUG] [default] - Pool eternity Thread 1 Downloaded 100.00% of blockchain from 8 peers"
and doesn't start the ENT threads.
Everything else is fine, new core and the js snipplet from above added.
Any ideas?
This is excellent news.
Thanks a lot!
Jump to: