do I need to put in the line command "walletpassphrase
Topic: [ANN][GRE] GreenCoin - A Blockchain-Based Social Carbon Ecosystem - page 26. (Read 80403 times)
January 11, 2016, 02:55:28 AM
Staking was working now after a reboot, nothing. Stake appears to be 0.
do I need to put in the line command "walletpassphrase
do I need to put in the line command "walletpassphrase
January 10, 2016, 06:40:45 PM
Make sure you guys are STAKING so you get your 2000 rewards!!!
January 10, 2016, 06:36:30 PM
Great job Ahmed on the PoS wallet release.
For Producers, 1-9-2016 will be the first GREV2 payout. I'm working on that through the website tonight and tomorrow. As long as you imported your old wallet privkey to GRE V2 there is no need to supply new GRE V2 addresses.
For Producers, 1-9-2016 will be the first GREV2 payout. I'm working on that through the website tonight and tomorrow. As long as you imported your old wallet privkey to GRE V2 there is no need to supply new GRE V2 addresses.
January 10, 2016, 06:25:23 PM
Is staking with an open wallet automatic after the conf file has been added as per pg 1 of this thread OR each time the wlalet is open I need to instruct a stake to commence?
Reason I ask is I have a reasonable amount of coins, which staked all on the first day, are now only staking 3% of the max available. Note: I shut down each night.
Reason I ask is I have a reasonable amount of coins, which staked all on the first day, are now only staking 3% of the max available. Note: I shut down each night.
The coin age is 24 hours. Although im considering changing the minimum confirms but that im going to discusss with chris at a later time. for now i think its fine, we're staking at a good pace so atm im happy with it.
Ahmd
Ahmd
January 10, 2016, 10:26:28 AM
The coin age is 24 hours. Although im considering changing the minimum confirms but that im going to discusss with chris at a later time. for now i think its fine, we're staking at a good pace so atm im happy with it.
Ahmd
Ahmd
January 10, 2016, 03:46:42 AM
Up and running...question as I am relatively new to PoS; how can I control the amount of coins being staked?
You can use the advanced coin control to access and change your UTXO blocks. It can be turned on by the check box under the options display tab. Select the block you want to split and then send an amount from it to your own address. If you want you can use the custom change address to keep the change from going into a new address. (Some wallets have a split block feature that makes this easier.)
The coins are usable after only 21 confirmations instead of 510, I'm wondering if this will change soon? If it stays like this the coin block size doesn't seem all that important because the coin weight does not change with time and goes to full weight as soon as the coins are confirmed as far as I can tell. In fact if this doesn't change, bigger blocks might be better to keep the CPU load lower on big wallets?
January 10, 2016, 02:26:09 AM
Any ideas how to host a wallet on a NAS? I have a DNS-320 connected 24/7 which I would like to put greencoin onto...
January 10, 2016, 01:38:43 AM
Up and running...question as I am relatively new to PoS; how can I control the amount of coins being staked?
January 09, 2016, 10:34:58 PM
No problem, looks like we're good to go.
All the people that did not get payouts out of the original payouts have also been paid by myself so i believe as of this moment. GREv2 is launched!
Ahmed
All the people that did not get payouts out of the original payouts have also been paid by myself so i believe as of this moment. GREv2 is launched!
Ahmed
Nice! I've got five connections and minting well! Thanks Ahmed!
January 09, 2016, 09:59:40 PM
No problem, looks like we're good to go.
All the people that did not get payouts out of the original payouts have also been paid by myself so i believe as of this moment. GREv2 is launched!
Ahmed
All the people that did not get payouts out of the original payouts have also been paid by myself so i believe as of this moment. GREv2 is launched!
Ahmed
January 09, 2016, 09:43:58 PM
Thx Ahmed.
It's working fine here with v1.2.1-50-gefa597c, even got my first stake rewards
Block #2597, connections: 4
It's working fine here with v1.2.1-50-gefa597c, even got my first stake rewards
Block #2597, connections: 4
January 09, 2016, 04:09:59 PM
I believe i have the client fixed and a successful stake without issue
Download Link:https://www.dropbox.com/s/94bfex1or76ip19/greencoin.zip?dl=0
When running this client is is essential to start the client for the first time as follows:
Press Windows-R to open the run window.
Open the ZIP folder, downloaded from dropbox
Drag the greencoin-qt.exe icon to the run window and at the end of it type "--reindex --rescan --checkblocks=0"
Now you can run press okay and in a few minutes you should see the new client up and running.
Example: http://imgur.com/ZBpFAL1z
Download Link:https://www.dropbox.com/s/94bfex1or76ip19/greencoin.zip?dl=0
When running this client is is essential to start the client for the first time as follows:
Press Windows-R to open the run window.
Open the ZIP folder, downloaded from dropbox
Drag the greencoin-qt.exe icon to the run window and at the end of it type "--reindex --rescan --checkblocks=0"
Now you can run press okay and in a few minutes you should see the new client up and running.
Example: http://imgur.com/ZBpFAL1z
January 09, 2016, 03:41:04 PM
yeah pull in the new code. that fixes it
Ahmed
Ahmed
January 09, 2016, 02:23:58 PM
Seems I am stuck on block # 500 with:
Code:
ERROR: AcceptBlock() : rejected by hardened checkpoint lock-in at 501
ERROR: ProcessBlock() : AcceptBlock FAILED
Misbehaving: 45.55.250.196:11517 (0 -> 100) DISCONNECTING
January 09, 2016, 02:01:50 PM
Code:
"connections" : 0
January 09, 2016, 01:10:03 PM
sigh, seems like this server is playing up again. keeps timing out. Will see if i can fix it
Ahmed
Ahmed
January 09, 2016, 11:44:15 AM
fetch the new copy
Thanks, updated. Now I am on block # 679 and have 2 connections.
EDIT: And back to 0 connections now.
January 09, 2016, 11:33:51 AM
fetch the new copy
January 09, 2016, 10:03:43 AM
Great job Ahmed!
Running wallet v1.2.1-49-g8380d14 from github since a few minutes. Balance is back and it seems I am staking already like a boss.
Current block on my node is # 677.
EDIT: Oh wait, I get 0 connections...
Running wallet v1.2.1-49-g8380d14 from github since a few minutes. Balance is back and it seems I am staking already like a boss.
Current block on my node is # 677.
EDIT: Oh wait, I get 0 connections...
January 09, 2016, 08:45:15 AM
I believe i have the client fixed and a successful stake without issue
Download Link:https://www.dropbox.com/s/94bfex1or76ip19/greencoin.zip?dl=0
When running this client is is essential to start the client for the first time as follows:
Press Windows-R to open the run window.
Open the ZIP folder, downloaded from dropbox
Drag the greencoin-qt.exe icon to the run window and at the end of it type "--reindex --rescan --checkblocks=0"
Now you can run press okay and in a few minutes you should see the new client up and running.
Example: http://imgur.com/ZBpFAL1z
Download Link:https://www.dropbox.com/s/94bfex1or76ip19/greencoin.zip?dl=0
When running this client is is essential to start the client for the first time as follows:
Press Windows-R to open the run window.
Open the ZIP folder, downloaded from dropbox
Drag the greencoin-qt.exe icon to the run window and at the end of it type "--reindex --rescan --checkblocks=0"
Now you can run press okay and in a few minutes you should see the new client up and running.
Example: http://imgur.com/ZBpFAL1z
Jump to: