Topic: [ANN][Main] Bitcore- BTX - Datacarriersize up to 220 bytes - page 1019. (Read 730549 times)
it is already hard for cpu unless got lots of power
I see that there is a CPU miner for this coin, but is that even profitable anymore? Or is this pretty much for GPU mining now?
I always get the message "No balance on snapshot" 
i had only 0.35 BTC in my account by then, is this not enough? (bought 0.8btc maybe 2 hours after the snap, fml -.-)
i had only 0.35 BTC in my account by then, is this not enough? (bought 0.8btc maybe 2 hours after the snap, fml -.-)
My BitCore pool confirmed the first block found and completed the payouts above 1 BTX balance. See some of the transaction below. Those who have already tried the pool before and moved on can check their pending balance by changing to their address in the url below. Miners who were online on the pool during the time when block was found may not feel the first balance very high as its the first block and whoever tried the pool before will still get their submitted share counted to reward split as its PPS based. If the miners can maintain their hash power on the pool with which the pool can find blocks on regular intervals, then the reward splits evens out between the participating miners.
http://neonpool.sytes.net/miner/1Kg47MevU17gL9AH5jiADwL4TrGcw1JErx
http://neonpool.sytes.net/miner/13XubW8PRLFRgmk5tZ9SC78zzAv91G2knV
http://neonpool.sytes.net/miner/1M9Aby8DuUQsYMcSNvChNuzCCs4vUnoKsi
Miners please join the pool and spread your hashing power.
http://neonpool.sytes.net
Pool fee: 0.5%
Minimum payout: 1 BTX
Stratum host: stratum+tcp://neonpool.sytes.net
Stratum port: 4008
Nvidia: ccminer --cpu-priority=3 -a timetravel -o stratum+tcp://neonpool.sytes.net:4008 -u -p
AMD: sgminer.exe -I 19 --no-submit-stale --kernel timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u -p
CPU: minerd -a timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u -p
Pool is slowly picking up pace and found couple more blocks yesterday and did some more payouts. Pool looking for consistent miners to keep the pool hash rate high so that block generation happens at a comfortable pace. Please note that miner balance will start showing up on miner stats page once the blocks are confirmed. To check your balance, please use the below url with your address updated:http://neonpool.sytes.net/miner/1Kg47MevU17gL9AH5jiADwL4TrGcw1JErx
http://neonpool.sytes.net/miner/13XubW8PRLFRgmk5tZ9SC78zzAv91G2knV
http://neonpool.sytes.net/miner/1M9Aby8DuUQsYMcSNvChNuzCCs4vUnoKsi
Miners please join the pool and spread your hashing power.
http://neonpool.sytes.net
Pool fee: 0.5%
Minimum payout: 1 BTX
Stratum host: stratum+tcp://neonpool.sytes.net
Stratum port: 4008
Nvidia: ccminer --cpu-priority=3 -a timetravel -o stratum+tcp://neonpool.sytes.net:4008 -u
AMD: sgminer.exe -I 19 --no-submit-stale --kernel timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u
CPU: minerd -a timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u
http://neonpool.sytes.net/miner/
As some miners requested before, I am changing my pool payout minimum to 0.1 BTX. New payout structure:
Minimum payout: 0.1 BTX
Pool fee: 1% (This fee would be effective only from the next block that pool mines, miner payout tx fee would be taken from pool fee balance as always)
Payout runs every 4 hours.
Please go ahead and check your current pending balance here: http://neonpool.sytes.net/miner/
Below payouts are made now from pool due to this change:
http://neonpool.sytes.net/miner/1KSkvVqeUzimybcPkxGTAt7DXS3Rxx5Ccb
http://neonpool.sytes.net/miner/17sPS11F5Sdi8D52KDnU5V5B6KTezGyrib
http://neonpool.sytes.net/miner/1F8rE4USSCwereSHskKasApyruc6wmUhB
http://neonpool.sytes.net/miner/1rHRdJLS1kPkFrUhCFCdL5sCBikr2Atsb
http://neonpool.sytes.net/miner/19QYyVWEiy3m2mTxQ1Pf1AGAps6Mww9wt7
Miners welcome
Hi! yes... I'm new to this forum but not new to cryptocurrency - I have accounts on other forums... but since this is "apparently" nr1 
why not?
Any ways where do I download sgminer for BitCore (BTX) I'd like to give it a try.
THX!
You can try downloading the miner from the path below:why not?
Any ways where do I download sgminer for BitCore (BTX) I'd like to give it a try.
THX!
http://bitsend.info/forums/index.php?topic=178.msg1298#msg1298
I have this error on ccminer
Cuda error in func 'cuda_check_cpu_setTarget' at line 41 : the launch timed out and was terminated.
http://prntscr.com/f423g0/direct <- screenshot
what is caused? is there any variable to set to fix it?
i already tried the -T 86400 or -T 3600 to set high value but it crash every 4-10 minutes and it must be restarted (i did this automatic with GOTO in .bat but would solve that problem)
Cuda error in func 'cuda_check_cpu_setTarget' at line 41 : the launch timed out and was terminated.
http://prntscr.com/f423g0/direct <- screenshot
what is caused? is there any variable to set to fix it?
i already tried the -T 86400 or -T 3600 to set high value but it crash every 4-10 minutes and it must be restarted (i did this automatic with GOTO in .bat but would solve that problem)
Hi! yes... I'm new to this forum but not new to cryptocurrency - I have accounts on other forums... but since this is "apparently" nr1
why not?
Any ways where do I download sgminer for BitCore (BTX) I'd like to give it a try.
THX!
why not?
Any ways where do I download sgminer for BitCore (BTX) I'd like to give it a try.
THX!
My BitCore pool confirmed the first block found and completed the payouts above 1 BTX balance. See some of the transaction below. Those who have already tried the pool before and moved on can check their pending balance by changing to their address in the url below. Miners who were online on the pool during the time when block was found may not feel the first balance very high as its the first block and whoever tried the pool before will still get their submitted share counted to reward split as its PPS based. If the miners can maintain their hash power on the pool with which the pool can find blocks on regular intervals, then the reward splits evens out between the participating miners.
http://neonpool.sytes.net/miner/1Kg47MevU17gL9AH5jiADwL4TrGcw1JErx
http://neonpool.sytes.net/miner/13XubW8PRLFRgmk5tZ9SC78zzAv91G2knV
http://neonpool.sytes.net/miner/1M9Aby8DuUQsYMcSNvChNuzCCs4vUnoKsi
Miners please join the pool and spread your hashing power.
http://neonpool.sytes.net
Pool fee: 0.5%
Minimum payout: 1 BTX
Stratum host: stratum+tcp://neonpool.sytes.net
Stratum port: 4008
Nvidia: ccminer --cpu-priority=3 -a timetravel -o stratum+tcp://neonpool.sytes.net:4008 -u -p
AMD: sgminer.exe -I 19 --no-submit-stale --kernel timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u -p
CPU: minerd -a timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u -p
Pool is slowly picking up pace and found couple more blocks yesterday and did some more payouts. Pool looking for consistent miners to keep the pool hash rate high so that block generation happens at a comfortable pace. Please note that miner balance will start showing up on miner stats page once the blocks are confirmed. To check your balance, please use the below url with your address updated:http://neonpool.sytes.net/miner/1Kg47MevU17gL9AH5jiADwL4TrGcw1JErx
http://neonpool.sytes.net/miner/13XubW8PRLFRgmk5tZ9SC78zzAv91G2knV
http://neonpool.sytes.net/miner/1M9Aby8DuUQsYMcSNvChNuzCCs4vUnoKsi
Miners please join the pool and spread your hashing power.
http://neonpool.sytes.net
Pool fee: 0.5%
Minimum payout: 1 BTX
Stratum host: stratum+tcp://neonpool.sytes.net
Stratum port: 4008
Nvidia: ccminer --cpu-priority=3 -a timetravel -o stratum+tcp://neonpool.sytes.net:4008 -u
AMD: sgminer.exe -I 19 --no-submit-stale --kernel timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u
CPU: minerd -a timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u
http://neonpool.sytes.net/miner/
Anyone using Sgminer to mine this coin? Can you please share your .bat file parameters? I think i am doing something wrong, which is causing the window to open and just disappear when clicked. This is what i have currently in the bat file:
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
i use -i 18 -w 64 -g 2
Still does the same, do you see anything wrong with the line i have posted on here? I think this is how it should look anyhow!
Edit: Guess i was missing the port, i updated that but still the same issue.
ah i didnt see the missing port, have you tried entering
setx GPU_MAX_ALLOC_PERCENT 100
etc?
Yep, all done! Its quite weird, but i have never been able to mine with sgminer! Claymore on the other hand, has been very easy to get up and go!
Anyone using Sgminer to mine this coin? Can you please share your .bat file parameters? I think i am doing something wrong, which is causing the window to open and just disappear when clicked. This is what i have currently in the bat file:
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
i use -i 18 -w 64 -g 2
Still does the same, do you see anything wrong with the line i have posted on here? I think this is how it should look anyhow!
Edit: Guess i was missing the port, i updated that but still the same issue.
ah i didnt see the missing port, have you tried entering
setx GPU_MAX_ALLOC_PERCENT 100
etc?
Anyone using Sgminer to mine this coin? Can you please share your .bat file parameters? I think i am doing something wrong, which is causing the window to open and just disappear when clicked. This is what i have currently in the bat file:
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
i use -i 18 -w 64 -g 2
Still does the same, do you see anything wrong with the line i have posted on here? I think this is how it should look anyhow!
Edit: Guess i was missing the port, i updated that but still the same issue.
Anyone using Sgminer to mine this coin? Can you please share your .bat file parameters? I think i am doing something wrong, which is causing the window to open and just disappear when clicked. This is what i have currently in the bat file:
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
i use -i 18 -w 64 -g 2
Anyone using Sgminer to mine this coin? Can you please share your .bat file parameters? I think i am doing something wrong, which is causing the window to open and just disappear when clicked. This is what i have currently in the bat file:
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x
I just claimed BTX its working fine thanks dev
Me too. It's quick and stable.
Very interesting coin ! I'm mining it with a GTX 980ti @14 MHs and GTX 1060 @~10 MHs
Did anyone had success to make an AMD miner work ? I tested the one provided on bitsend.info but it just seem to hang on without mining.
I tested it on a rig with 2 R9 290x (Crimson 16.6 driver).
Thanks for your help
Did anyone had success to make an AMD miner work ? I tested the one provided on bitsend.info but it just seem to hang on without mining.
I tested it on a rig with 2 R9 290x (Crimson 16.6 driver).
Thanks for your help
TRY BITBANDI'S GITHUB--
I was able o compile and run his SGminer for BitCore (BTX) on my linux rig. One note: if there is an error in your launch line, SGminer can hang and close even if it is able to run properly if launched correctly. --scryptr
Very interesting coin ! I'm mining it with a GTX 980ti @14 MHs and GTX 1060 @~10 MHs
Did anyone had success to make an AMD miner work ? I tested the one provided on bitsend.info but it just seem to hang on without mining.
I tested it on a rig with 2 R9 290x (Crimson 16.6 driver).
Thanks for your help
Did anyone had success to make an AMD miner work ? I tested the one provided on bitsend.info but it just seem to hang on without mining.
I tested it on a rig with 2 R9 290x (Crimson 16.6 driver).
Thanks for your help
What happens if not many people claim their Bitcoin? Do Devs take all the unclaimed?
I wonder if private keys for BTC can be reused for BTX. Is it not possible because hash algo was changed?
Anyways if we could reuse private key, we do not need to worry about ownership or thinking its significantly premined coin.
I wonder if private keys for BTC can be reused for BTX. Is it not possible because hash algo was changed?
Anyways if we could reuse private key, we do not need to worry about ownership or thinking its significantly premined coin.
i think this will happen the claim phase is just for people who have coins storeed in a way where its difficult access the private key but u can easy sign messages
all BTC owners who dont participate in the claim pahse will later on get their BTX send towards the same address as on BTC chain so basically u can claim without timelimit with private key in your local wallet
but i think some dust amounts will not be spread and give the bitcore team some leftover funding for future development
as i trust this guys it will be sure below 1% total coins
Then I guess it is matter of when is the time to spend the dust or leftover. We have to trust the developers. In the case of Byteball, there is a point when we do not need to worry about premined coins. Once the distribution phase is completed we know that there are only 1% of coins are owned by the founder. However, for BTX, we will never know. At certain point, developer may decide now is the time to use the left over. But no one will know when that time would be. I think that this can be an issue in the future. We can view this coin as significantly premined coin.
I think I know what the ccminer crash is about, see the ccminer btctalk thread.
https://bitcointalksearch.org/topic/ann-ccminer-23-opensource-gpl-tpruvot-770064
https://bitcointalksearch.org/topic/ann-ccminer-23-opensource-gpl-tpruvot-770064
Thank you for the hint, I've changed a couple of lines in the code to use __thread variables and it seems to be stable for me now.
Looking forward to see how Epsylon decides to fix it.
you recommend to read whole thread ? 
noooooo just the last posts, of course.
you recommend to read whole thread ?
my ccminer freeze today with error.
anyone else have same problems?
maybe any suggestions ?
ot maybe there are an additional parameter for miner to check activity and restart if necessary.
my ccminer freeze today with error.
anyone else have same problems?
maybe any suggestions ?
ot maybe there are an additional parameter for miner to check activity and restart if necessary.
Jump to: