[ANN][Main] Bitcore- BTX - Datacarriersize up to 220 bytes - page 1021.

Vaccinus

sr. member

Activity: 406

Merit: 250

Quote from: bensam1231 on May 03, 2017, 04:05:25 AM

Does anyone have a miner that doesn't break after 1 minute to 10 hours with 'illegal memory access'? I've tried Nigoh's as well and doesn't seem to fix it.

try this one https://bitcointalksearch.org/topic/m.18775890 work perfectly for nvidia no error or illegal memory access crash, but the displayed hashrate seems off

bensam1231

legendary

Activity: 1764

Merit: 1024

Does anyone have a miner that doesn't break after 1 minute to 10 hours with 'illegal memory access'? I've tried Nigoh's as well and doesn't seem to fix it.

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: Story777 on May 03, 2017, 03:22:26 AM

Quote from: Limx Dev on May 02, 2017, 12:24:41 PM

BTX Claiming-Service sponsored by Team BitSend
BTC Claiming..klick here

This claiming is 6 months possible. (11-02-2107) It is for everyone free.

_________________________________________________
Please follow with no rush this guide and control your BTC adress for qualifying for the BitCore claiming service.

1. Type your bitcoinaddress and wait few seconds. Our system will control your address. With positive result, follow step 2

2. Please sign a message with your bitcoinwallet and type "BTX". Fill the incoming signature in the first window.In the second window you type your new BitCore address.

_________

_________________________________________________
3. If you did everything right, the system checks it and you will see this message.

4. You see an example, what will happen, when you already claimed.The system will show you the BTX transaction ID.

Everything finished. Enjoy your new claimed BTX.

Hi BTX community.

I have a couple of questions, the first question I'm sure I already know the answer.

For those who may use Blockchain.info is there another way they can claim coins since blockchain.info does not allow users to sign msgs. Well, more factually you can only sign imported addresses not the new addresses with the new wallet. I am assuming the answer is no, if you can't sign a msg you cannot prove ownership. Would this answer be correct? No other work-around?

My second question is regarding the time stamp for my own personally claim, I disagree with the total amount in the snapshot. It's not even close to being correct. It isn't much of an issue for me if the answer to the first question is no, because I would be unable to claim. However if I could claim BTX I would like to claim the full amount. I know it is something I have overlooked as the timestamp of the blockchain one cannot change. Anyone else having a different amount? Anyone else wanting to claim from blockchain.info or am I alone?

I am very interested in this coin, it sounds promising. No big deal with my questions, regardless the answer or my oversight I will buy. I'm just curious.

Hello Story777,

thank you for your questions.
Can you check this guide here? https://forum.bitcoin.com/beginners-help/guide-how-so-sign-a-message-with-blockchain-info-t436.html

It is possible to check your balance via Blockchain.info?

Kind Regards Christian

the_timetravler

full member

Activity: 134

Merit: 100

Can someone help me please?

I am trying to mine BTX on Supernova.
I instaled cgminer 4.9.2 and tried to confiure the miner

STRATUM:   stratum+tcp://btx.suprnova.cc
PORT:   3629
Username:   Weblogin.Worker
Password:   Worker Password

But after typing "stratum+tcp://btx.suprnova.cc" and enter
it asks me for Username but not for the PORT

at the end I get "stratum+tcp://btx.suprnova.cc failed alive testing, reinput details"

Can someone tell me what I did wrong or how I can get it work?
Thanks in advance!

Story777

member

Activity: 78

Merit: 102

Quote from: Limx Dev on May 02, 2017, 12:24:41 PM

BTX Claiming-Service sponsored by Team BitSend
BTC Claiming..klick here

This claiming is 6 months possible. (11-02-2107) It is for everyone free.

_________________________________________________
Please follow with no rush this guide and control your BTC adress for qualifying for the BitCore claiming service.

1. Type your bitcoinaddress and wait few seconds. Our system will control your address. With positive result, follow step 2

2. Please sign a message with your bitcoinwallet and type "BTX". Fill the incoming signature in the first window.In the second window you type your new BitCore address.

_________

_________________________________________________
3. If you did everything right, the system checks it and you will see this message.

4. You see an example, what will happen, when you already claimed.The system will show you the BTX transaction ID.

Everything finished. Enjoy your new claimed BTX.

Hi BTX community.

I have a couple of questions, the first question I'm sure I already know the answer.

For those who may use Blockchain.info is there another way they can claim coins since blockchain.info does not allow users to sign msgs. Well, more factually you can only sign imported addresses not the new addresses with the new wallet. I am assuming the answer is no, if you can't sign a msg you cannot prove ownership. Would this answer be correct? No other work-around?

My second question is regarding the time stamp for my own personally claim, I disagree with the total amount in the snapshot. It's not even close to being correct. It isn't much of an issue for me if the answer to the first question is no, because I would be unable to claim. However if I could claim BTX I would like to claim the full amount. I know it is something I have overlooked as the timestamp of the blockchain one cannot change. Anyone else having a different amount? Anyone else wanting to claim from blockchain.info or am I alone?

I am very interested in this coin, it sounds promising. No big deal with my questions, regardless the answer or my oversight I will buy. I'm just curious.

Limx Dev

copper member

Activity: 2352

Merit: 1348

Discus Fish (F2Pool) has claimed. Thank you

https://claim.bitcore.cc/pay.php

1KFHE7w8BhaENAswwryaoccDb6qcT6DbYY
HC7RUdPCMpJyGcE5IZeL8sngxCWSfFL2zVuVcKs4UPgPcjjVIstfFFcU6r2Cpl/s6mrVO4z9eXdgnRfJmDtO4tM=
1KFHE7w8BhaENAswwryaoccDb6qcT6DbYY
fe4f9e885bbd5225ab9fba999f6a4f4f9a1400ec6bf4173f5d0db5dca55a2734
1463.58694636

bones261

legendary

Activity: 1806

Merit: 1828

Quote from: boo50 on May 03, 2017, 02:01:52 AM

Sorry, I don't understand.
I use my BTX address, where some BTX already.

Did you read the opening statement? "Every BTC holder can claim his coins with the BTC Signature 1:1 1BTC = 1BTX" You needed to have bitcoins to claim the free BTX, at an bitcoin address that you control the keys.

boo50

sr. member

Activity: 472

Merit: 250

lux8.net

Sorry, I don't understand.
I use my BTX address, where some BTX already.

bones261

legendary

Activity: 1806

Merit: 1828

Quote from: boo50 on May 03, 2017, 12:21:52 AM

tried to claim but got an error
Error : Sorry, No Balance on Snapshot - Block 463604 ! Please try again...
what does it mean?

It means that you didn't have BTC at that address when the snapshot was taken at block 463619 (minted : 2017-04-26 17:10:01).

boo50

sr. member

Activity: 472

Merit: 250

lux8.net

tried to claim but got an error
Error : Sorry, No Balance on Snapshot - Block 463604 ! Please try again...
what does it mean?

dArkjON

hero member

Activity: 683

Merit: 513

http://bitcoin-engrave.com/ & https://bitcore.cc

shorena wrote a very nice manual for sign a message with different providers or wallets :

How to sign a message?! - https://bitcointalksearch.org/topic/how-to-sign-a-message-990345

fitraok09

legendary

Activity: 1049

Merit: 1009

TRX: TCRKDukYt2zDie9vJDhToKrP3tyTV29U48

Quote from: kurniajim on May 02, 2017, 06:01:53 PM

Quote from: fitraok09 on May 02, 2017, 05:17:58 PM

Quote from: tortellino on May 02, 2017, 04:58:13 PM

Edit: Sry tried it different time, but always an error message "Sign Message not match with Address. Maybe Text is not "BTX", Capslock is very important here !" -> i used the advised steps: after entering my BTC address the timestamped BTC amount is correctly shown.....then i go to my ledger wallet and choose my timestamped BTC address for signing. in the field message i type "BTX" with the both quotation marks and i recieve message hash which i paste from the beginning of the message hash (which starts with my BTC address) to the end of the message (which ends with a =). Did i make any mistakes?

you can look in

https://i.imgur.com/REw15zh.png

Where I can get my signature?

I using electrum wallet. just click "Tools tab > Sign/verify message"

levelten

full member

Activity: 184

Merit: 100

Quote from: kurniajim on May 02, 2017, 06:01:53 PM

Quote from: fitraok09 on May 02, 2017, 05:17:58 PM

Quote from: tortellino on May 02, 2017, 04:58:13 PM

Edit: Sry tried it different time, but always an error message "Sign Message not match with Address. Maybe Text is not "BTX", Capslock is very important here !" -> i used the advised steps: after entering my BTC address the timestamped BTC amount is correctly shown.....then i go to my ledger wallet and choose my timestamped BTC address for signing. in the field message i type "BTX" with the both quotation marks and i recieve message hash which i paste from the beginning of the message hash (which starts with my BTC address) to the end of the message (which ends with a =). Did i make any mistakes?

you can look in

Where I can get my signature?

https://support.coinbase.com/customer/portal/articles/1526413-how-do-i-sign-a-message-with-a-bitcoin-address-

kurniajim

hero member

Activity: 924

Merit: 1000

Decentralised Amazon & ICO Hub

Quote from: fitraok09 on May 02, 2017, 05:17:58 PM

Quote from: tortellino on May 02, 2017, 04:58:13 PM

Edit: Sry tried it different time, but always an error message "Sign Message not match with Address. Maybe Text is not "BTX", Capslock is very important here !" -> i used the advised steps: after entering my BTC address the timestamped BTC amount is correctly shown.....then i go to my ledger wallet and choose my timestamped BTC address for signing. in the field message i type "BTX" with the both quotation marks and i recieve message hash which i paste from the beginning of the message hash (which starts with my BTC address) to the end of the message (which ends with a =). Did i make any mistakes?

you can look in

Where I can get my signature?

levelten

full member

Activity: 184

Merit: 100

Quote from: fitraok09 on May 02, 2017, 05:17:58 PM

Quote from: tortellino on May 02, 2017, 04:58:13 PM

Edit: Sry tried it different time, but always an error message "Sign Message not match with Address. Maybe Text is not "BTX", Capslock is very important here !" -> i used the advised steps: after entering my BTC address the timestamped BTC amount is correctly shown.....then i go to my ledger wallet and choose my timestamped BTC address for signing. in the field message i type "BTX" with the both quotation marks and i recieve message hash which i paste from the beginning of the message hash (which starts with my BTC address) to the end of the message (which ends with a =). Did i make any mistakes?

you can look in

Make sure you click the verified button to verified it.

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: fitraok09 on May 02, 2017, 05:17:58 PM

Quote from: tortellino on May 02, 2017, 04:58:13 PM

Edit: Sry tried it different time, but always an error message "Sign Message not match with Address. Maybe Text is not "BTX", Capslock is very important here !" -> i used the advised steps: after entering my BTC address the timestamped BTC amount is correctly shown.....then i go to my ledger wallet and choose my timestamped BTC address for signing. in the field message i type "BTX" with the both quotation marks and i recieve message hash which i paste from the beginning of the message hash (which starts with my BTC address) to the end of the message (which ends with a =). Did i make any mistakes?

you can look in

http://www.coinig.com/

fitraok09

legendary

Activity: 1049

Merit: 1009

TRX: TCRKDukYt2zDie9vJDhToKrP3tyTV29U48

Quote from: tortellino on May 02, 2017, 04:58:13 PM

Edit: Sry tried it different time, but always an error message "Sign Message not match with Address. Maybe Text is not "BTX", Capslock is very important here !" -> i used the advised steps: after entering my BTC address the timestamped BTC amount is correctly shown.....then i go to my ledger wallet and choose my timestamped BTC address for signing. in the field message i type "BTX" with the both quotation marks and i recieve message hash which i paste from the beginning of the message hash (which starts with my BTC address) to the end of the message (which ends with a =). Did i make any mistakes?

you can look in

tortellino

sr. member

Activity: 504

Merit: 250

Edit: Sry tried it different time, but always an error message "Sign Message not match with Address. Maybe Text is not "BTX", Capslock is very important here !" -> i used the advised steps: after entering my BTC address the timestamped BTC amount is correctly shown.....then i go to my ledger wallet and choose my timestamped BTC address for signing. in the field message i type "BTX" with the both quotation marks and i recieve message hash which i paste from the beginning of the message hash (which starts with my BTC address) to the end of the message (which ends with a =). Did i make any mistakes?

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: tortellino on May 02, 2017, 04:25:39 PM

For claiming can i use my BTX exchange address from cryptopia or do i need a windows wallet address?

We recommend to use the BTX Wallet but a exchange address is possible.

https://claim.bitcore.cc/pay.php

tortellino

sr. member

Activity: 504

Merit: 250

For claiming can i use my BTX exchange address from cryptopia or do i need a windows wallet address?

Edit: Sry tried it different time, but always an error message "Sign Message not match with Address. Maybe Text is not "BTX", Capslock is very important here !" -> i used the advised steps: after entering my BTC address the timestamped BTC amount is correctly shown.....then i go to my ledger wallet and choose my timestamped BTC address for signing. in the field message i type "BTX" with the both quotation marks and i recieve message hash which i paste from the beginning of the message hash (which starts with my BTC address) to the end of the message (which ends with a =). Did i make any mistakes?

Topic: [ANN][Main] Bitcore- BTX - Datacarriersize up to 220 bytes - page 1021. (Read 730398 times)