[ANN][Main] Bitcore- BTX - Datacarriersize up to 220 bytes - page 21.

uralcryptocoin

sr. member

Activity: 1042

Merit: 328

SIGNATURE CREATION by uralcryptocoin

Quote from: MoparMiningLLC on September 15, 2020, 10:14:07 PM

yes I agree on both of those points. I was like wait a minute, the block reward increased? lol and I am seeing those errors too. but I dont know of any other pools that are using the new algo for bitcore.

Look at https://pool.rplant.xyz/
but Nvidia miner is much slower for this pool (My config gives 15 Mh/s at rplant vs. 25 Mh/s at coinspool)

MoparMiningLLC

legendary

Activity: 2324

Merit: 2533

EIN: 82-3893490

Quote from: uralcryptocoin on September 15, 2020, 10:05:11 PM

Daily income calculator should be corrected. Indeed total Block reward is 1.5625 but only a half goes to PoW miners (0.78125 BTX). So divide forecasted income by two.

Also there is often connection error

Code:

Stratum connection interrupted

yes I agree on both of those points. I was like wait a minute, the block reward increased? lol and I am seeing those errors too. but I dont know of any other pools that are using the new algo for bitcore.

uralcryptocoin

sr. member

Activity: 1042

Merit: 328

SIGNATURE CREATION by uralcryptocoin

Quote from: elbandi on September 15, 2020, 04:22:14 PM

Here is a (beta) nvidia miner for my pool: http://www.coinspool.cc/static/ccminer_megabtx.zip

Just set your bitcore address, (maybe one secure port if you have big rig) and start mine Wink

If you have issue, contact me on pm!

Elbandi

Daily income calculator should be corrected. Indeed total Block reward is 1.5625 but only a half goes to PoW miners (0.78125 BTX). So divide forecasted income by two.

Also there is often connection error

Code:

Stratum connection interrupted

MoparMiningLLC

legendary

Activity: 2324

Merit: 2533

EIN: 82-3893490

Quote from: elbandi on September 15, 2020, 04:22:14 PM

Here is a (beta) nvidia miner for my pool: http://www.coinspool.cc/static/ccminer_megabtx.zip

Just set your bitcore address, (maybe one secure port if you have big rig) and start mine Wink

If you have issue, contact me on pm!

Elbandi

well have been using this miner - so far pool has found 4 blocks during that time (5 total but 1 I assume is the one from yesterday) - though not sure how to see what I have earned though as it still says my balance is zero - guessing maybe have to wait till its confirmed? the site could use some better stats or a way to look up a miners stats if they are not currently mining.

edit - I do see in the pending blocks that it shows my miner as the finder of the first, third and fourth blocks as well (I used 2 different addresses)

elbandi

hero member

Activity: 525

Merit: 531

Here is a (beta) nvidia miner for my pool: http://www.coinspool.cc/static/ccminer_megabtx.zip

Just set your bitcore address, (maybe one secure port if you have big rig) and start mine Wink

If you have issue, contact me on pm!

Elbandi

andrucrypt

member

Activity: 725

Merit: 49

Quote from: uralcryptocoin on September 15, 2020, 01:06:00 PM

For me mining with WildRig Multi 0.26.0 works well. But it is not enough profitable at current level of network hashrate and BTX price.
ETH mining gives about 1.5 times more than BTX mining.
My config is 8 x GTX1070 and I get about 15-16 Mh/s.

yeah, unfortunately miner not yet fully optimized for NVIDIA gpu's. Hashrate should be at least twice higher, so it will be comparable to values on AMD gpu's.

uralcryptocoin

sr. member

Activity: 1042

Merit: 328

SIGNATURE CREATION by uralcryptocoin

For me mining with WildRig Multi 0.26.0 works well. But it is not enough profitable at current level of network hashrate and BTX price.
ETH mining gives about 1.5 times more than BTX mining.
My config is 8 x GTX1070 and I get about 15-16 Mh/s.

andrucrypt

member

Activity: 725

Merit: 49

Quote from: MoparMiningLLC on September 14, 2020, 06:35:43 PM

so the blocks it said I found were wrong or right? and do i need to change something?

Probably this is some error in miner, or too high mem overclock on gpu. Also this can be with nvidia gpu's, since this kind of algorithms are not well done in miner yet and need some additional work.

MoparMiningLLC

legendary

Activity: 2324

Merit: 2533

EIN: 82-3893490

Quote from: elbandi on September 14, 2020, 08:45:44 PM

Quote from: MoparMiningLLC on September 14, 2020, 06:35:43 PM

so the blocks it said I found were wrong or right? and do i need to change something?

edit - the miner is running more smoothly now but i am still curious about all those blocks it said i found - I stopped counting after 35 or so. though the miner says i am running at about 25 mh/s and the pool says 1.6 mh/s

for example i am getting this scrolling repeatedly

now its acting all goofy again - not sure if its the pool or the miner. but going to give it a break for a few days and see if any new updates come out.

we already found a block. the pool hashrate display was buggy. i tested with my pc, and displays same as the miner.

i dont know, why shows many foundblocks for you. Sad

not sure but it started tossing up errors about diff too low and rejecting all the shares.

what miner are you using? I was using wildrig

elbandi

hero member

Activity: 525

Merit: 531

Quote from: MoparMiningLLC on September 14, 2020, 06:35:43 PM

so the blocks it said I found were wrong or right? and do i need to change something?

edit - the miner is running more smoothly now but i am still curious about all those blocks it said i found - I stopped counting after 35 or so. though the miner says i am running at about 25 mh/s and the pool says 1.6 mh/s

for example i am getting this scrolling repeatedly

now its acting all goofy again - not sure if its the pool or the miner. but going to give it a break for a few days and see if any new updates come out.

we already found a block. the pool hashrate display was buggy. i tested with my pc, and displays same as the miner.

i dont know, why shows many foundblocks for you. Sad

MoparMiningLLC

legendary

Activity: 2324

Merit: 2533

EIN: 82-3893490

Quote from: elbandi on September 14, 2020, 06:34:16 PM

Quote from: MoparMiningLLC on September 14, 2020, 06:12:38 PM

no matter what port I use - it rejects 99% of all shares as being too low diff

and while the miner(using wildrig) says that i "found shares" the pool still says nothing.

now wildrig is reporting that i am finding a block but pool still shows zero.

Fixed, there was a wrong settings in pool config. :/

so the blocks it said I found were wrong or right? and do i need to change something?

edit - the miner is running more smoothly now but i am still curious about all those blocks it said i found - I stopped counting after 35 or so. though the miner says i am running at about 25 mh/s and the pool says 1.6 mh/s

for example i am getting this scrolling repeatedly

now its acting all goofy again - not sure if its the pool or the miner. but going to give it a break for a few days and see if any new updates come out.

elbandi

hero member

Activity: 525

Merit: 531

Quote from: MoparMiningLLC on September 14, 2020, 06:12:38 PM

no matter what port I use - it rejects 99% of all shares as being too low diff

and while the miner(using wildrig) says that i "found shares" the pool still says nothing.

now wildrig is reporting that i am finding a block but pool still shows zero.

Fixed, there was a wrong settings in pool config. :/

MoparMiningLLC

legendary

Activity: 2324

Merit: 2533

EIN: 82-3893490

Quote from: elbandi on September 14, 2020, 05:10:29 PM

Quote from: Gtx1070rig on September 14, 2020, 11:53:04 AM

New wildrig miner with megabtx Implementation :-O

https://github.com/andru-kun/wildrig-multi/releases/download/0.26.0/wildrig-multi-windows-0.26.0.7z

Another pool for this coin: http://www.coinspool.cc/info_bitcore-mega

Happy mining!

Elbandi

no matter what port I use - it rejects 99% of all shares as being too low diff

and while the miner(using wildrig) says that i "found shares" the pool still says nothing.

now wildrig is reporting that i am finding a block but pool still shows zero.

elbandi

hero member

Activity: 525

Merit: 531

Quote from: Gtx1070rig on September 14, 2020, 11:53:04 AM

New wildrig miner with megabtx Implementation :-O

https://github.com/andru-kun/wildrig-multi/releases/download/0.26.0/wildrig-multi-windows-0.26.0.7z

Another pool for this coin: http://www.coinspool.cc/info_bitcore-mega

Happy mining!

Elbandi

Gtx1070rig

jr. member

Activity: 56

Merit: 4

Quote from: Gtx1070rig on September 10, 2020, 11:33:20 AM

Quote from: MoparMiningLLC on September 09, 2020, 01:46:31 PM

Quote from: uralcryptocoin on September 09, 2020, 12:03:31 PM

Dear Devteam!

Is there any news about BTX GPU miner announcement? Now is more than a week past after BTX algo switched. Build-in miner is very slow. How can we support the project if we have no enough posibilities?

agreed - I have gotten a whole 7 blocks since 9/2

Wildrigminer will Not Support it because no Pools to Test... but without 0 config qt miner no pools...

Srbminer seems Not working on megabtx...

Nvidia trex dev will have a look...

So i think chances of gpu miner are low......... :-(

New wildrig miner with megabtx Implementation :-O

https://github.com/andru-kun/wildrig-multi/releases/download/0.26.0/wildrig-multi-windows-0.26.0.7z

Gtx1070rig

jr. member

Activity: 56

Merit: 4

Quote from: MoparMiningLLC on September 09, 2020, 01:46:31 PM

Quote from: uralcryptocoin on September 09, 2020, 12:03:31 PM

Dear Devteam!

Is there any news about BTX GPU miner announcement? Now is more than a week past after BTX algo switched. Build-in miner is very slow. How can we support the project if we have no enough posibilities?

agreed - I have gotten a whole 7 blocks since 9/2

Wildrigminer will Not Support it because no Pools to Test... but without 0 config qt miner no pools...

Srbminer seems Not working on megabtx...

Nvidia trex dev will have a look...

So i think chances of gpu miner are low......... :-(

MoparMiningLLC

legendary

Activity: 2324

Merit: 2533

EIN: 82-3893490

Quote from: uralcryptocoin on September 09, 2020, 12:03:31 PM

Dear Devteam!

Is there any news about BTX GPU miner announcement? Now is more than a week past after BTX algo switched. Build-in miner is very slow. How can we support the project if we have no enough posibilities?

agreed - I have gotten a whole 7 blocks since 9/2

uralcryptocoin

sr. member

Activity: 1042

Merit: 328

SIGNATURE CREATION by uralcryptocoin

Dear Devteam!

Is there any news about BTX GPU miner announcement? Now is more than a week past after BTX algo switched. Build-in miner is very slow. How can we support the project if we have no enough posibilities?

xandry

staff

Activity: 3472

Merit: 4111

Crypto Swap Exchange

Quote from: ?? on ??

So where is the wallet's source code?
and any build instructions?
Since https://github.com/LIMXTEC/BitCore/blob/master/doc/build-unix.md is instructions for building btc core
and https://github.com/LIMXTEC/BitCore/releases/download/0.90.9.6/bitcore-x86_64-linux-gnu_qt5-dev.tar.gz is precompiled?

Source code: https://github.com/LIMXTEC/BitCore
You can find build instructions and link to precompiled archive in my previous post. Or choose another one on https://github.com/LIMXTEC/BitCore/releases

Gtx1070rig

jr. member

Activity: 56

Merit: 4

Quote from: Turrican on September 06, 2020, 03:46:34 PM

Hey

https://github.com/SpecTurrican/PI_BitCore

Now support for BitCore 0.90.9.6 Raspberry Pi 4

Happy mining Cool

holy guacamoly you can mine with just an raspberry pi :-O

Topic: [ANN][Main] Bitcore- BTX - Datacarriersize up to 220 bytes - page 21. (Read 730496 times)