Topic: [ANN][Main] Bitcore- BTX - Datacarriersize up to 220 bytes - page 25. (Read 730146 times)
Is there any guide for setting up masternodes on Windows?
.....
.....
You might need to setup port forwarding in your router to the local IP you are running your masternode on. I assume you are aware of all the dangers of running a masternode on a local system as opposed to a VPS and why it is better to keep it on a vps.
Yes, i also did port fordwarding (port says reachable and open according to ping.eu) and the wallet has incoming/outgoing connections. Still the MN doesnt work. Maybe there's another configuration needed in windows or the local network is not set up as needed.
Thanks for your tip, i'm seriously considering the hot/cold wallet method for security matters and after all this troubles.
Is there any guide for setting up masternodes on Windows?
I had one on a VPS under linux. But same parameters are not working on a windows one.
Maybe bitcore.conf needs additional parameters. Any idea will be appreciated.
I had one on a VPS under linux. But same parameters are not working on a windows one.
Maybe bitcore.conf needs additional parameters. Any idea will be appreciated.
Is this a windows VPS or are you trying to run a masternode from your home?
I'm testing with a local pc before deploying on remote systems.
What would be the difference?
I have the port open and reachable. Same MNs keys as before.
Debug console shows..
12:27:33 mnsync status
12:27:33 {
"AssetID": 999,
"AssetName": "MASTERNODE_SYNC_FINISHED",
"AssetStartTime": 1591715971,
"Attempt": 0,
"IsBlockchainSynced": true,
"IsMasternodeListSynced": true,
"IsWinnersListSynced": true,
"IsSynced": true,
"IsFailed": false
}
bitcore.conf in remote PC as follows..
rpcuser=whatever
rpcpassword=whatever
rpcallowip=127.0.0.1
rpcport=8555
externalip=my ip
masternodeaddr=my ip:8555
listen=1
daemon=0
logtimestamps=1
maxconnections=64
masternode=1
masternodeprivkey=XXxxxxXXxxxxxxx
Local wallet masternode.conf updated for remote PC ip, start alias.. shows PRE-ENABLED.. then EXPIRED
You might need to setup port forwarding in your router to the local IP you are running your masternode on. I assume you are aware of all the dangers of running a masternode on a local system as opposed to a VPS and why it is better to keep it on a vps.
Is there any guide for setting up masternodes on Windows?
I had one on a VPS under linux. But same parameters are not working on a windows one.
Maybe bitcore.conf needs additional parameters. Any idea will be appreciated.
I had one on a VPS under linux. But same parameters are not working on a windows one.
Maybe bitcore.conf needs additional parameters. Any idea will be appreciated.
Is this a windows VPS or are you trying to run a masternode from your home?
I'm testing with a local pc before deploying on remote systems.
What would be the difference?
I have the port open and reachable. Same MNs keys as before.
Debug console shows..
12:27:33 mnsync status
12:27:33 {
"AssetID": 999,
"AssetName": "MASTERNODE_SYNC_FINISHED",
"AssetStartTime": 1591715971,
"Attempt": 0,
"IsBlockchainSynced": true,
"IsMasternodeListSynced": true,
"IsWinnersListSynced": true,
"IsSynced": true,
"IsFailed": false
}
bitcore.conf in remote PC as follows..
rpcuser=whatever
rpcpassword=whatever
rpcallowip=127.0.0.1
rpcport=8555
externalip=my ip
masternodeaddr=my ip:8555
listen=1
daemon=0
logtimestamps=1
maxconnections=64
masternode=1
masternodeprivkey=XXxxxxXXxxxxxxx
Local wallet masternode.conf updated for remote PC ip, start alias.. shows PRE-ENABLED.. then EXPIRED
Is there any guide for setting up masternodes on Windows?
I had one on a VPS under linux. But same parameters are not working on a windows one.
Maybe bitcore.conf needs additional parameters. Any idea will be appreciated.
I had one on a VPS under linux. But same parameters are not working on a windows one.
Maybe bitcore.conf needs additional parameters. Any idea will be appreciated.
Is this a windows VPS or are you trying to run a masternode from your home?
Is there any guide for setting up masternodes on Windows?
I had one on a VPS under linux. But same parameters are not working on a windows one.
Maybe bitcore.conf needs additional parameters. Any idea will be appreciated.
I had one on a VPS under linux. But same parameters are not working on a windows one.
Maybe bitcore.conf needs additional parameters. Any idea will be appreciated.
BitCore for Raspberry Pi 4
BitCore for Raspberry Pi 4 (2GB / 4GB or 8GB RAM Version only) with Desktop RPD and remonte SSH/RDP control.
Needs:
ISO Raspbian Lite (https://www.raspberrypi.org/downloads/raspbian/)
16GB SD-Card
A Raspberry Pi 4 (with minimum 2GB Ram)
Login as ROOT (start Raspberry Pi and login as 'pi' user... password is 'raspberry'... 'sudo su root')
You can execute the following install script. Just copy/paste and hit "Enter"-key.
Source Github https://github.com/SpecTurrican/PI_BitCore
Have fun
Screenshoot
BitCore for Raspberry Pi 4 (2GB / 4GB or 8GB RAM Version only) with Desktop RPD and remonte SSH/RDP control.
Needs:
ISO Raspbian Lite (https://www.raspberrypi.org/downloads/raspbian/)
16GB SD-Card
A Raspberry Pi 4 (with minimum 2GB Ram)
Login as ROOT (start Raspberry Pi and login as 'pi' user... password is 'raspberry'... 'sudo su root')
You can execute the following install script. Just copy/paste and hit "Enter"-key.
Code:
wget -qO - https://raw.githubusercontent.com/SpecTurrican/PI_BitCore/master/setup.sh | bash
Source Github https://github.com/SpecTurrican/PI_BitCore
Have fun
Screenshoot
Can I still use bitcore BTX 0.15.2.0? It is completely synced and the block hight matches with the block explorer.
Use the last version better and be happy.You can run even Masternode with last version of Bitcore wallet.
BTX forever!!!
Can I still use bitcore BTX 0.15.2.0? It is completely synced and the block hight matches with the block explorer.
Use the last version better and be happy.You can run even Masternode with last version of Bitcore wallet.
BTX forever!!!
Can I still use bitcore BTX 0.15.2.0? It is completely synced and the block hight matches with the block explorer.
Explorer for BitCore (BTX) has been activated on MnRank Explorer:
https://explorer.mnrank.com/explorer/BTX
https://explorer.mnrank.com/explorer/BTX
If Hhampuz posted a project here, it means he accepted the job of posting the project on behalf of the team because he believes that this is a legit project.
Reputable BMs usually don't accept the job of representing a project unless he is truly convinced with the intentions of the project.
So let's see if this will really be indeed a good project to watch out for or not...
Reputable BMs usually don't accept the job of representing a project unless he is truly convinced with the intentions of the project.
So let's see if this will really be indeed a good project to watch out for or not...
Can you please share more info on this address conversion thing?
Here you can read it. https://bitcore.cc/important-update-bitcore-public-keys/But this should not be a problem. Update the wallet to the latest version and your old address will be updated automatically with a new address. The new address with your 1.5 BTX can then also be found in the block explorer. Remember to create a backup beforehand.
I have a address with 1.5 BTX in it. I know it is ridiculous amount, but still, I want to be able to own what is mine.
However, all the block explorers I tested are not even recognizing my BTX address.
But when i start the wallet, the coins are there.
The coins are from 2018.
Has blockchain technology changed fundamentally since then?
However, all the block explorers I tested are not even recognizing my BTX address.
But when i start the wallet, the coins are there.
The coins are from 2018.
Has blockchain technology changed fundamentally since then?
You have the latest wallet, synced properly and the coins are there?
There was indeed a change with addresses some time ago (years) but there was a way to automatically map old addresses to new if I remember correctly
Maybe create a new address and move the coins there since the wallet sees them?
Can you please share more info on this address conversion thing?
I have a address with 1.5 BTX in it. I know it is ridiculous amount, but still, I want to be able to own what is mine.
However, all the block explorers I tested are not even recognizing my BTX address.
But when i start the wallet, the coins are there.
The coins are from 2018.
Has blockchain technology changed fundamentally since then?
However, all the block explorers I tested are not even recognizing my BTX address.
But when i start the wallet, the coins are there.
The coins are from 2018.
Has blockchain technology changed fundamentally since then?
You have the latest wallet, synced properly and the coins are there?
There was indeed a change with addresses some time ago (years) but there was a way to automatically map old addresses to new if I remember correctly
Maybe create a new address and move the coins there since the wallet sees them?
I have a address with 1.5 BTX in it. I know it is ridiculous amount, but still, I want to be able to own what is mine.
However, all the block explorers I tested are not even recognizing my BTX address.
But when i start the wallet, the coins are there.
The coins are from 2018.
Has blockchain technology changed fundamentally since then?
However, all the block explorers I tested are not even recognizing my BTX address.
But when i start the wallet, the coins are there.
The coins are from 2018.
Has blockchain technology changed fundamentally since then?
 | _ | Now you can store BitCore on CC EAL6+ certified OPOLO hardware wallet. Learn more on opolo.io. There is also discount code for our community: TheCapital20. Download OPOLO Desktop Application Disclaimer: Bitcore BTX cannot take responsibility for third party providers, such as the listed exchanges, wallets, sites and pools. BitCore Your Coin, Your Money  Share & Retweet |
___ANN Designed by DgCarlosLeon | BITCORE BTX - 2020
___
___
BitCore BTX version v0.90.9.1-0606cbc (64-bit) for Mac just keeps crashing. It syncs the blockchain all the way until the end then a minute later crashes. Re-Open and start all over again.
If you quit in the middle a few times you can keep it from re-sycning the entire change, but ultimately it still never finishes the last few minutes.
I wanted to transact some coins and can't SEND. Someone please help.
Is there another wallet I can take my wallet.dat to to send my coins?
Did you use the bootstrap or without? If you use the bootstrap, you must first delete the "blocks" and "chainstate" directories and then replace them with the directories from the bootstrap file. Either way make a backup of everything beforehand. If without bootstrap, give it a try. If you quit in the middle a few times you can keep it from re-sycning the entire change, but ultimately it still never finishes the last few minutes.
I wanted to transact some coins and can't SEND. Someone please help.
Is there another wallet I can take my wallet.dat to to send my coins?
Otherwise you can export your private keys and import them into another wallet. That shouldn't be a problem. Or report the error in the BTX telegram channel. You can be helped there.
https://t.me/bitcore_cc
edit
BitCore BTX version v0.90.9.1-0606cbc (64-bit) for Mac just keeps crashing. It syncs the blockchain all the way until the end then a minute later crashes. Re-Open and start all over again.
If you quit in the middle a few times you can keep it from re-sycning the entire change, but ultimately it still never finishes the last few minutes.
I wanted to transact some coins and can't SEND. Someone please help.
Is there another wallet I can take my wallet.dat to to send my coins?
If you quit in the middle a few times you can keep it from re-sycning the entire change, but ultimately it still never finishes the last few minutes.
I wanted to transact some coins and can't SEND. Someone please help.
Is there another wallet I can take my wallet.dat to to send my coins?
Jump to: