MEC
Email me your user info and I'll take a look.
Topic: [ANN][Multi-Coin][Stratum] multipool.in newbies support thread (Read 27332 times)
Email me your user info and I'll take a look.
December 01, 2013, 05:21:52 AM
MEC
December 01, 2013, 05:17:03 AM
Requested CashOut more than an hour ago. Still in the "Requested" state. No email notification either. Is it ok?
what coin?
December 01, 2013, 05:01:49 AM
Requested CashOut more than an hour ago. Still in the "Requested" state. No email notification either. Is it ok?
November 26, 2013, 05:45:04 AM
So I thought I would give this pool a try. the erupters in cgminer are say they are doing 1.3Gh/z where as the website is jumping between 230-460 Mh/z.
I am also getting these messages: ICA0: invalid nonce - HW error
stratum from pool 0 requested work restart
stratum connection to pool 0 interupter
and the occasional message of an accepted thingy.
Not sure what i have done wrong so any suggestions would be appriciated.
Thanks
Edit: It seemed to have worked itself out. Though when it changes coins, it seems to be down for 10-15 minutes after each change. Is that normal? It has also changed coin 4 times in the last 15 minutes. so no mining for a 30 minute timeframe assuming it doesn't change again.
I am also getting these messages: ICA0: invalid nonce - HW error
stratum from pool 0 requested work restart
stratum connection to pool 0 interupter
and the occasional message of an accepted thingy.
Not sure what i have done wrong so any suggestions would be appriciated.
Thanks
Edit: It seemed to have worked itself out. Though when it changes coins, it seems to be down for 10-15 minutes after each change. Is that normal? It has also changed coin 4 times in the last 15 minutes. so no mining for a 30 minute timeframe assuming it doesn't change again.
November 18, 2013, 11:27:02 AM
Yeah... for over 4 hours now I've been connected to the pool with no D/Cs. In that time the pool has switched to all the coins with which I was having problems. Looks like a solid fix 
Thank you!
Thank you! November 18, 2013, 09:47:28 AM
cannot connect to stratum+tcp://pool1.us.multipool.us:7777. cgminer just sits there doing nothing.
plz fix.
EDIT: never mind, its working now. i recopied and pasted the address in my miner. ill let you know if any problems occur.
plz fix.
EDIT: never mind, its working now. i recopied and pasted the address in my miner. ill let you know if any problems occur.
November 17, 2013, 11:19:00 PM
I can't hardly connect to the pool anymore - FTC, WDC, and DGC always seems to kick my GPUs off or prevent them from connecting to the pool in the first place. It's been happening for a few weeks now and it's getting so hard to connect that it's ridiculous.
Speaking of ridiculous, why is the pool so fond of FTC? It's sooooo very often that I look to see that the multipool is on FTC, then look at coinwarz to find the most profitable coins. For instance, it's now on FTC yet more profitable coins currently include: WDC, CAP, NVC, MEC, CGB, and LTC - all before FTC. Why does the pool favor FTC so much? It's crap to me- in fact the only Scrypt coin on the website that I try to avoid mining.
Speaking of ridiculous, why is the pool so fond of FTC? It's sooooo very often that I look to see that the multipool is on FTC, then look at coinwarz to find the most profitable coins. For instance, it's now on FTC yet more profitable coins currently include: WDC, CAP, NVC, MEC, CGB, and LTC - all before FTC. Why does the pool favor FTC so much? It's crap to me- in fact the only Scrypt coin on the website that I try to avoid mining.
October 22, 2013, 08:00:01 AM
Can you lock it on Btc, until the first block is found. That way we can atleast know it works
not a bad idea, actually.
October 20, 2013, 04:19:21 AM
Can you lock it on Btc, until the first block is found. That way we can atleast know it works
October 20, 2013, 01:49:02 AM
Is there a way to make the automatic threshold for bitcoin be .1 instead of 1?
October 13, 2013, 09:17:36 PM
Good day!
I'm new to this pool and so far I really like it. I've a question though. How do I manage all those coins? Do I need to have a wallet for each type of coin?
If that could be clarified that be really helpfull!
Regards,
Jamie
I'm new to this pool and so far I really like it. I've a question though. How do I manage all those coins? Do I need to have a wallet for each type of coin?
If that could be clarified that be really helpfull!
Regards,
Jamie
Personally, I just use the online Exchanges as 'wallets'. It seems complicated, but with the coins I've dabbled in. I have holdings in 3 Exchanges. That's not hard to manage when you consider I've dabbled in LTC, TRC, PPC, NMC (via merged mining; btw, can we get NMC on Multipool...it's worth quite a bit considering it's an alt coin), ZET, and ASC....oh and of course BTC.
All the coins I mine I funnel back into BTC, which is then sent to an 'Online Wallet' (Blockchain's). And a backup is made that is store on my Google Drive as well as a local backup on my HDD....which is then backed up to a backup drive
October 11, 2013, 10:40:43 AM
Good day!
I'm new to this pool and so far I really like it. I've a question though. How do I manage all those coins? Do I need to have a wallet for each type of coin?
If that could be clarified that be really helpfull!
Regards,
Jamie
I'm new to this pool and so far I really like it. I've a question though. How do I manage all those coins? Do I need to have a wallet for each type of coin?
If that could be clarified that be really helpfull!
Regards,
Jamie
You're not going to keep all these alt coins, are you? If yes, and you think you could store them and sell when they climb up the price ladder (if ever, stuff as with WDC do happen though) then you could install a wallet for each and sync MBs of data daily or leave them in multipool (risky). If you're like most other people however, you'd wanna bank on BTC/LTC/FTC or some stable coin with a future. In that case you could just transfer your funds in multipool to an exchange like cryptsy and sell them there for BTC/LTC. No wallet needed. I only have multibit and LTC wallet installed.
October 11, 2013, 04:19:34 AM
Good day!
I'm new to this pool and so far I really like it. I've a question though. How do I manage all those coins? Do I need to have a wallet for each type of coin?
If that could be clarified that be really helpfull!
Regards,
Jamie
I'm new to this pool and so far I really like it. I've a question though. How do I manage all those coins? Do I need to have a wallet for each type of coin?
If that could be clarified that be really helpfull!
Regards,
Jamie
October 08, 2013, 10:57:39 AM
would be nice to have sha256 multipool to switches between btc, ppc, and TRC depending on which is most profitable at the time
September 20, 2013, 01:13:14 PM
Try on something faster, the hash rates on LTC and NVC hardly show up. Since DGC diff is fluctuating I suggest you try CGminer with WorldCoin to try out. And besides you mentioned 10MH/s so I assumed you to be mining TRC. If you're mining LTC etc, you sure you're adding --scrypt switch? Get rid of the .conf and run this from command line
You might play with the thread concurrency value and Intensity values. Try mining for 30 mins and then see
Quote
cgminer --scrypt -o stratum+tcp://pool1.us.multipool.us:3342 --thread-concurrency 16384 -u xxx.1 -p x -w 256 --lookup-gap 2 -I 20
You might play with the thread concurrency value and Intensity values. Try mining for 30 mins and then see
September 20, 2013, 10:55:53 AM
multipool is seeing the work being done with worker xxx.1 on CPUminer at a blazing 3.5 KH/s, when I try to utilize the on-board nvidia 4200 with cgminer or bfgminer under worker xxx.test, either miner will "connect" to the litecoin mining pool as directed, but after running for over a day, multipool never showed the worker xxx.test as working, and my litecoin balance didn't change. what am i doing wrong 
the video card should be capable of putting out 9-10 MH/s
the video card should be capable of putting out 9-10 MH/s September 19, 2013, 04:17:17 AM
looks ok to me What are you mining with? CPU? Use pooler's CPUminer for that case.
What are you mining with? CPU? Use pooler's CPUminer for that case. September 18, 2013, 03:44:15 PM
Even 10 Mh/s should show up, I'd done it for DGC@18KH/s for a couple days on CPU mining 
I've been mining just fine the last 3-4 days. Double check your cgminer.conf /.bat file maybe?
I've been mining just fine the last 3-4 days. Double check your cgminer.conf /.bat file maybe? Here is my config: http://pastie.org/8337054
Username removed, everything else looks fine?
September 18, 2013, 03:29:43 PM
Even 10 Mh/s should show up, I'd done it for DGC@18KH/s for a couple days on CPU mining I've been mining just fine the last 3-4 days. Double check your cgminer.conf /.bat file maybe?
I've been mining just fine the last 3-4 days. Double check your cgminer.conf /.bat file maybe? Jump to: