Pages:
Author

Topic: [ANN][Multi-Coin][Stratum] multipool.in newbies support thread - page 8. (Read 27294 times)

newbie
Activity: 32
Merit: 0
Hey guys...here´s my next question coming up my mind:

Why is speed jumping around that showed way?


My miner is mining at a very constant speed and says 1.800MH/s which is about where I marked the red line.
So have I something missconfigured (as said above I´m using a mining proxy) or is that just normal?
member
Activity: 75
Merit: 10
Hey...have switched from BTC to altcoins and found your multipool very attractive.
Looks great!

I have connection problems with my stratum proxy though and hope anyone can help me out.
I use slush0´s mining proxy (https://github.com/slush0/stratum-mining-proxy) and have never had problems with it.
Before I was mining at bitminter. There I connected to port:8332

Now: If i use
"mining_proxy.py o- stratum+tcp://multipool.in p- 3333 it can´t connect
then I used
"mining_proxy.py o- multipool.in p- 3333 and it was working but of course it was mining TRC - because that´s the port for TRC -

Then I tried:
"mining_proxy.py o- multipool.in p- 3339 and also with the port 7777 but then it does not connect.

Anyone here who can help me out with some ideas?

It's not you.  The pool is down.  Well it seems to be anyway, no connect for me over the last couple of hours and stats on the website aren't updating.
newbie
Activity: 20
Merit: 0
Only tried 7777 and 3339 - neither
newbie
Activity: 10
Merit: 0
great bunch of pools
newbie
Activity: 32
Merit: 0
Yah, can't connect with cgminer on 7777 either.
But you can connect to other ports than 3333?
newbie
Activity: 20
Merit: 0
Yah, can't connect with cgminer on 7777 either.
newbie
Activity: 32
Merit: 0
Hey...have switched from BTC to altcoins and found your multipool very attractive.
Looks great!

I have connection problems with my stratum proxy though and hope anyone can help me out.
I use slush0´s mining proxy (https://github.com/slush0/stratum-mining-proxy) and have never had problems with it.
Before I was mining at bitminter. There I connected to port:8332

Now: If i use
"mining_proxy.py o- stratum+tcp://multipool.in p- 3333 it can´t connect
then I used
"mining_proxy.py o- multipool.in p- 3333 and it was working but of course it was mining TRC - because that´s the port for TRC -

Then I tried:
"mining_proxy.py o- multipool.in p- 3339 and also with the port 7777 but then it does not connect.

Anyone here who can help me out with some ideas?
newbie
Activity: 20
Merit: 0
Hey y'all.  Ubernewb here.  Just started mining with GUIMINER and spinning away at about 210 Mh w/ 176 accepted but I don't see my stats updated on the page.  I just wanted to crosscheck.  Is there an error on my part?

Username is same as this one:  SullyTex
hero member
Activity: 938
Merit: 1000
www.multipool.us
wont go mining terracoin ( might be intended as site says still mining ltc and its not scrypt tho)

Yeah the multiport will never mine terracoin since it's not scrypt.  At some point I will add a SHA256 Multiport.
newbie
Activity: 37
Merit: 0
I've started mining with multipool.in:7777.  It appears to be working and communicating well.  It has been 2 hours and I'm not seeing any updates in My Stats.

Did I do something wrong?

What's your username?

Sorry, I thought I'd get an email notification if I got a reply but didn't get one.  I finally got it working.  I can't remember what I had done though.

Now I'm on a new issue.

I mined on port 7777 for awhile, but wanted to build up on 1 coin to play with so i switched to port 3343 for DGC.  Now I wanted to switch to port 3342 but it won't let me.

I'm using cgminer and here's what I've done:

  • Changed the port # in config file, restarted cgminer.  It added 3342 as a pool option but port 3343 stayed active
  • Tried to switch to pool with the port # 3342 within the pool option and it won't switch.
  • Exited cgminer, changed the port # in the .bat file, started up cgminer.  Again port # 3343 is active while the other ports are back ups.
  • In the pool menu of cgminer, I disabled the pool with port # 3343, it did switch to port #3342... but it won't hash.  Nothing comes up.

I don't know what else to try.

Update:  I tried disabling pool with port # 3343, restarted cgminer, but it just re-enabled the pool with port # 3343.

Update:  nevermind, it's working now.  I went into pool menu, removed pools, quit cgminer.  Restarted with .bat file, and it started back up.  For whatever reason though, at startup I was getting an error about network at pool being slow or bad credentials.  But it appears to be fine now because the site is showing that I've got a hashrate going.
newbie
Activity: 40
Merit: 0
wont go mining terracoin ( might be intended as site says still mining ltc and its not scrypt tho)
sr. member
Activity: 336
Merit: 250
Is there any way to unlock the auto-payment address? I don't see a way to change it to another address. Thanks.
newbie
Activity: 16
Merit: 0
does it auto switch asswel? or must we switch each time? or do i just have to put in each ulr:port in cgminer conf?

If you use the scrypt Multiport (port 7777) it will automatically switch to the most profitable for you.
newbie
Activity: 41
Merit: 0
API issue?

Submitting  a request for:
https://www.multipool.in/api.php?api_key=xxxx

Gets a response of:
<<
Not Found

The requested URL /api.php was not found on this server.

Apache/2.2.22 (Ubuntu) Server at www.multipool.in Port 443
>>
newbie
Activity: 40
Merit: 0
does it auto switch asswel? or must we switch each time? or do i just have to put in each ulr:port in cgminer conf?
hero member
Activity: 938
Merit: 1000
www.multipool.us
ok, so s/th went wrong and i lost it somehow..well

You didn't lose it, the pool lost it.  Anyway, sorry Sad
newbie
Activity: 6
Merit: 0
ok, so s/th went wrong and i lost it somehow..well
hero member
Activity: 938
Merit: 1000
www.multipool.us
Hello
I've mined ftc since 21.05 to 08.06 (yesterday). Around 380 kH/s on 1x7850
I've stopped mining yesterday cause of much people came to mine ftc and found one block.
Last time I saw ftc pool stats it said I had around 125 FTC and the Est. Time To Find Block was 3 times smaller than the Time Since Last Block, so I don't think the ppls would cut my earning 100times
Today I recieved "Your balance of 1.02600828 has exceeded your automatic..."
could you say me it's ok? My name on the pool is the same.


Hi, there were many issues on the FTC network yesterday, and several blocks were orphaned.  This resulted in the wallet emptying itself as some blocks were paid at 20 confirms and then later orphaned.  If you still have a balance in your account you should be able to withdraw it now.

hero member
Activity: 938
Merit: 1000
www.multipool.us
Hi,

Is there any way to unlock a payment address?

Cheers,

Email me your username and I will unlock it.
newbie
Activity: 6
Merit: 0
Hello
I've mined ftc since 21.05 to 08.06 (yesterday). Around 380 kH/s on 1x7850
I've stopped mining yesterday cause of much people came to mine ftc and found one block.
Last time I saw ftc pool stats it said I had around 125 FTC and the Est. Time To Find Block was 3 times smaller than the Time Since Last Block, so I don't think the ppls would cut my earning 100times
Today I recieved "Your balance of 1.02600828 has exceeded your automatic..."
could you say me it's ok? My name on the pool is the same.
Pages:
Jump to: