[ANN][MULTI][VARDIFF] TradeMyBit MULTIALGO Profit Swap w/ Optional Auto-exchange - page 19.

merc82

sr. member

Activity: 354

Merit: 254

Owner of MiningRigRentals

Quote from: platinum4 on June 27, 2014, 12:23:12 PM

Quote from: merc82 on June 27, 2014, 10:37:01 AM

Quote from: platinum4 on June 27, 2014, 03:55:05 AM

merc82,

you haven't heard from me in a minute, but I'm usually your weather vane.

x15 storm is coming, 1 coin out right now, 1 dropping in 3 hours.

Can you throw us up an x15 stratum, and a x15 multiport?

It could be a real fun weekend for us blue-collar miners...

I'm right there with ya Wink

Working on the stratum modifications needed today -- I dont have an exact ETA, but its in progress

Good deal.

Yep GPU miner available already. Last night difficulty went from 5 to currently 144.

BBL is added, "multiport" for x15 is 6660. I'll get the web interface/etc updated over the next day or so.

Xenocyde

sr. member

Activity: 265

Merit: 250

Please provide link for x15 miner.

platinum4

sr. member

Activity: 547

Merit: 250

Quote from: merc82 on June 27, 2014, 10:37:01 AM

Quote from: platinum4 on June 27, 2014, 03:55:05 AM

merc82,

you haven't heard from me in a minute, but I'm usually your weather vane.

x15 storm is coming, 1 coin out right now, 1 dropping in 3 hours.

Can you throw us up an x15 stratum, and a x15 multiport?

It could be a real fun weekend for us blue-collar miners...

I'm right there with ya Wink

Working on the stratum modifications needed today -- I dont have an exact ETA, but its in progress

Good deal.

Yep GPU miner available already. Last night difficulty went from 5 to currently 144.

merc82

sr. member

Activity: 354

Merit: 254

Owner of MiningRigRentals

Quote from: platinum4 on June 27, 2014, 03:55:05 AM

merc82,

you haven't heard from me in a minute, but I'm usually your weather vane.

x15 storm is coming, 1 coin out right now, 1 dropping in 3 hours.

Can you throw us up an x15 stratum, and a x15 multiport?

It could be a real fun weekend for us blue-collar miners...

I'm right there with ya Wink

Working on the stratum modifications needed today -- I dont have an exact ETA, but its in progress

Xenocyde

sr. member

Activity: 265

Merit: 250

I assume we only need a kernel file for sgminer 5.

Taxidermista

legendary

Activity: 1148

Merit: 1001

Quote from: platinum4 on June 27, 2014, 03:55:05 AM

merc82,

you haven't heard from me in a minute, but I'm usually your weather vane.

x15 storm is coming, 1 coin out right now, 1 dropping in 3 hours.

Can you throw us up an x15 stratum, and a x15 multiport?

It could be a real fun weekend for us blue-collar miners...

Is there a good gpu miner available?

platinum4

sr. member

Activity: 547

Merit: 250

merc82,

you haven't heard from me in a minute, but I'm usually your weather vane.

x15 storm is coming, 1 coin out right now, 1 dropping in 3 hours.

Can you throw us up an x15 stratum, and a x15 multiport?

It could be a real fun weekend for us blue-collar miners...

MobileWill

member

Activity: 119

Merit: 10

Quote from: Amgclk65 on June 26, 2014, 09:14:41 AM

Is tmb worker down alert working? Had a rig go down over night. Didn't get any notification. I enable it under the worker option.

I use http://bitmon.net to get email notifcations.

Pelk

full member

Activity: 132

Merit: 100

Quote from: Amgclk65 on June 26, 2014, 09:14:41 AM

Is tmb worker down alert working? Had a rig go down over night. Didn't get any notification. I enable it under the worker option.

The worker email notification is not working atm.

Amgclk65

newbie

Activity: 34

Merit: 0

Is tmb worker down alert working? Had a rig go down over night. Didn't get any notification. I enable it under the worker option.

ordomagus

newbie

Activity: 9

Merit: 0

Quote from: langes01x on June 24, 2014, 07:21:36 PM

Quote from: Lovebeast on June 24, 2014, 06:48:18 PM

Quote from: dragonmike on June 24, 2014, 08:57:30 AM

Thanks langes01x.
Just one point that I didn't get 100%: do I need sgminer v5.0 to use the 4010/4011 ports on TMB?
Ideally I'd be using the TMB autoswitcher as x11mod/x13mod give quite a boost compared to dark/maru... and I'm using PIMP on my mining rig (not too keen on having my PC running 24/7 just to be able to steer & monitor it).

I wouldn't use the 4010/4011 ports if you're not using the v5 mainly because if whatever switching software on the client side is out of sync with the 4010/4011, you'll just be trying to mine on a dead port and it'll go to your secondary. If for instance X13 is more profitable, the 4011 port is on, but you'll see the 4010 port as dead and vice versa.

Just a note though, my miner sees the 4010 and 4011 ports both dead quite a bit, at the same time and I end up mining my secondary for a few minutes.

Sgminer v5.0 is required for using the 4010/4011 ports. One workaround for having both ports dead is put one of the profit switching ports as top priority and then a normal port for the other algorithm after so that the second port is always alive.

My switcher also requires sgminer v5.0 but only because it is faster when switching algorithms because it doesn't have to kill the miner and start a new one up. I may at some point in the future add the ability to have separate miners per algorithm to support non-v5.0 versions.

With the new updates to sgminer v5.0 there should be improvements for the hash rate using AMD driver 14.6 so it should be comparable to the other faster miner I believe (I haven't updated since the 6/6/2014 build yet though so I'm not absolutely certain).

The new v5.0 builds on 14.6 are closer to the x11mod and x13mod standalones, but they still lag behind by 10-20% in terms of sustained MHash on my rigs.

dragonmike

hero member

Activity: 1274

Merit: 556

Thanks for your answers guys, much appreciated.
I think the PiMP guys are in the process of implementing Sgminer v5, so I'll keep a close eye on it.

langes01x

newbie

Activity: 17

Merit: 0

Quote from: Lovebeast on June 24, 2014, 06:48:18 PM

Quote from: dragonmike on June 24, 2014, 08:57:30 AM

Thanks langes01x.
Just one point that I didn't get 100%: do I need sgminer v5.0 to use the 4010/4011 ports on TMB?
Ideally I'd be using the TMB autoswitcher as x11mod/x13mod give quite a boost compared to dark/maru... and I'm using PIMP on my mining rig (not too keen on having my PC running 24/7 just to be able to steer & monitor it).

I wouldn't use the 4010/4011 ports if you're not using the v5 mainly because if whatever switching software on the client side is out of sync with the 4010/4011, you'll just be trying to mine on a dead port and it'll go to your secondary. If for instance X13 is more profitable, the 4011 port is on, but you'll see the 4010 port as dead and vice versa.

Just a note though, my miner sees the 4010 and 4011 ports both dead quite a bit, at the same time and I end up mining my secondary for a few minutes.

Sgminer v5.0 is required for using the 4010/4011 ports. One workaround for having both ports dead is put one of the profit switching ports as top priority and then a normal port for the other algorithm after so that the second port is always alive.

My switcher also requires sgminer v5.0 but only because it is faster when switching algorithms because it doesn't have to kill the miner and start a new one up. I may at some point in the future add the ability to have separate miners per algorithm to support non-v5.0 versions.

With the new updates to sgminer v5.0 there should be improvements for the hash rate using AMD driver 14.6 so it should be comparable to the other faster miner I believe (I haven't updated since the 6/6/2014 build yet though so I'm not absolutely certain).

Lovebeast

newbie

Activity: 9

Merit: 0

Quote from: dragonmike on June 24, 2014, 08:57:30 AM

Thanks langes01x.
Just one point that I didn't get 100%: do I need sgminer v5.0 to use the 4010/4011 ports on TMB?
Ideally I'd be using the TMB autoswitcher as x11mod/x13mod give quite a boost compared to dark/maru... and I'm using PIMP on my mining rig (not too keen on having my PC running 24/7 just to be able to steer & monitor it).

I wouldn't use the 4010/4011 ports if you're not using the v5 mainly because if whatever switching software on the client side is out of sync with the 4010/4011, you'll just be trying to mine on a dead port and it'll go to your secondary. If for instance X13 is more profitable, the 4011 port is on, but you'll see the 4010 port as dead and vice versa.

Just a note though, my miner sees the 4010 and 4011 ports both dead quite a bit, at the same time and I end up mining my secondary for a few minutes.

bullus

sr. member

Activity: 294

Merit: 250

Quote from: dragonmike on June 24, 2014, 08:57:30 AM

Thanks langes01x.
Just one point that I didn't get 100%: do I need sgminer v5.0 to use the 4010/4011 ports on TMB?
Ideally I'd be using the TMB autoswitcher as x11mod/x13mod give quite a boost compared to dark/maru... and I'm using PIMP on my mining rig (not too keen on having my PC running 24/7 just to be able to steer & monitor it).

With the latest sgminer v5 multi , the hashrates are also increased ;-) https://bitcointalksearch.org/topic/m.7478563 (it's using profiles now)

I'm using it now and using port 4010/4011 for x11/x13 switching and somehow if scrypt is more profit than x11/x13 it aslo switch to scrypt! I don't know how but it's switching. Maybe Merc can explain.

dragonmike

hero member

Activity: 1274

Merit: 556

Thanks langes01x.
Just one point that I didn't get 100%: do I need sgminer v5.0 to use the 4010/4011 ports on TMB?
Ideally I'd be using the TMB autoswitcher as x11mod/x13mod give quite a boost compared to dark/maru... and I'm using PIMP on my mining rig (not too keen on having my PC running 24/7 just to be able to steer & monitor it).

langes01x

newbie

Activity: 17

Merit: 0

Quote from: dragonmike on June 24, 2014, 05:36:42 AM

Hi all
Sorry... but with the lack of general guide, I've been searching through pages and posts of this thread... and I have a few questions:

1) Do I need SGminer v5 to be able to algo-switch x11/x13 on TMB?
2) If not, I'm using PIMP v1.5 at the moment. Do I only need to add the "algorithm" : "x11mod" / "x13mod" lines under the pool settings in the conf file? Or is there another parameter to add?
3) Do I use the same ports as the main TMB x11 and x13 pools (i.e. 4440 and 5550 respectively)?

Anything else?

Many thanks!
Dragonmike

Depending on how you do the algorithm switching you could use a different version of sgminer. The algorithm switcher by 0uranos works with all versions of sgminer as it just kills the miner and starts up a different one (https://github.com/0uranos/trademybit-switcher/tree/x11). If you are using sgminer v5.0 though you have a few more options. You could use the 4010/4011 ports on TradeMyBit and have the pool itself switch algorithms for you (subject to whatever algorithm merc uses for switching) or you can use my switcher if you also have a windows machine on the same network as the miner (https://bitcointalksearch.org/topic/ann-trademybit-algorithm-switchermonitor-661827).

Do note that sgminer v5.0 uses the darkcoin-mod and marucoin-mod kernels and not x11mod/x13mod.

dragonmike

hero member

Activity: 1274

Merit: 556

Hi all
Sorry... but with the lack of general guide, I've been searching through pages and posts of this thread... and I have a few questions:

1) Do I need SGminer v5 to be able to algo-switch x11/x13 on TMB?
2) If not, I'm using PIMP v1.5 at the moment. Do I only need to add the "algorithm" : "x11mod" / "x13mod" lines under the pool settings in the conf file? Or is there another parameter to add?
3) Do I use the same ports as the main TMB x11 and x13 pools (i.e. 4440 and 5550 respectively)?

Anything else?

Many thanks!
Dragonmike

Xenocyde

sr. member

Activity: 265

Merit: 250

So I'm using TMB Switcher and sometimes i get pop-up message from taskbar saying "switching from whatever algo to off" and miner is waiting for work from pool. Sometimes it resumes work in at most 1-2 minutes, but sometimes it just idles indeterminately. When I catch this I manually enable the most profitable pool, but there are times when I'm not around the miner... What can I do to prevent this idling?

uberua

member

Activity: 179

Merit: 10

Quote from: bullus on June 23, 2014, 04:49:48 AM

Than I don't know..which sgminer do u use? U already test it with tcc8192?
or maybe reboot the pc.

sgminer 4.1.0. I tested it with tcc8192, same result with 32768...
May be I'll try to reboot it later, right now I'll stay to mine x11, it worked fine till now.
Thank you for trying to help me

Topic: [ANN][MULTI][VARDIFF] TradeMyBit MULTIALGO Profit Swap w/ Optional Auto-exchange - page 19. (Read 153100 times)