Topic: [ANN][MULTI][VARDIFF] TradeMyBit MULTIALGO Profit Swap w/ Optional Auto-exchange - page 27. (Read 153090 times)
June 10, 2014, 05:10:40 AM
Mining on www.coinking.io right now and the reject rate is really low 0.3% for me.
June 10, 2014, 05:05:16 AM
i see no hashrate at part of miners in web interface. But it's still working and shares is accepting. It's okay?
June 10, 2014, 12:21:29 AM
I also notice high rejectrates of 10%. Stratum am02.
June 09, 2014, 11:30:43 PM
the rejects ratio is toooooooo much 25 % and up 
June 09, 2014, 10:40:37 PM
I had to restart the miner before I get normal accepted shares again, because of the downtime.
edit;
What happend to cloakcoin? Pow is not yet over.
edit;
What happend to cloakcoin? Pow is not yet over.
June 09, 2014, 08:55:07 PM
Hi. What's the normal reject rate for x13? thx
June 09, 2014, 08:43:41 PM
Replying to myself, I just checked the main site :
big thx for your work
Quote
Mining is now fully operational.. we'll be bringing the front-end back online shortly
no worry then big thx for your work
June 09, 2014, 08:39:47 PM
Issue with master server -- its being looked into, completely offline at present
What is the issue? I just requested payouts on several coins about 40 mins ago, right before this happened. Some of the coins are showing as pending but not confirmed yet, some haven't even been sent. I hope this doesn't mess anything up with the payouts that were happening at the time the server has problems? Thanks merc82
All coins are safe, and everything will process once its back up
Hopefully not much longer, but I don't have an ETA (it's in my providers hands ATM)
The main site is not back up but my miners went back at work : lzb-sgminer is set on balance (with another X13 pool), all 3 TMB locations are enabled, with a different worker for each one of them
All seems working good, beside a huge Reject ratio, but it may be my internet connection which is lame (vpn o/umts)
I'm wondering if the shares solved now will be recorded by the pool ?
FWIW, here are my actual stats :
Code:
Pool: stratum+tcp://am01.eu.trademybit.com:5550
Queued work requests: 179
Share submissions: 239
Accepted shares: 209
Rejected shares: 30
Accepted difficulty shares: 3
Rejected difficulty shares: 0
Reject ratio: 12.6%
Items worked on: 2093
Discarded work due to new blocks: 782
Stale submissions discarded due to new blocks: 1
Unable to get work from server occasions: 3
Submitting work remotely delay occasions: 0
Pool: stratum+tcp://east01.us.trademybit.com:5550
Queued work requests: 175
Share submissions: 213
Accepted shares: 200
Rejected shares: 13
Accepted difficulty shares: 3
Rejected difficulty shares: 0
Reject ratio: 6.1%
Items worked on: 2177
Discarded work due to new blocks: 794
Stale submissions discarded due to new blocks: 0
Unable to get work from server occasions: 2
Submitting work remotely delay occasions: 0
Pool: stratum+tcp://west01.us.trademybit.com:5550
Queued work requests: 182
Share submissions: 252
Accepted shares: 211
Rejected shares: 41
Accepted difficulty shares: 2
Rejected difficulty shares: 0
Reject ratio: 16.3%
Items worked on: 2129
Discarded work due to new blocks: 775
Stale submissions discarded due to new blocks: 4
Unable to get work from server occasions: 2
Submitting work remotely delay occasions: 0
June 09, 2014, 06:43:56 PM
just switched to http://coinking.io and it's workin great!
June 09, 2014, 06:37:29 PM
=( I'm a dummy and use TMB backups hahaha oh well, loss of time isn't that big a deal. Thanks for the status updates that's very much appreciated.
June 09, 2014, 06:14:15 PM
Issue with master server -- its being looked into, completely offline at present
What is the issue? I just requested payouts on several coins about 40 mins ago, right before this happened. Some of the coins are showing as pending but not confirmed yet, some haven't even been sent. I hope this doesn't mess anything up with the payouts that were happening at the time the server has problems? Thanks merc82
All coins are safe, and everything will process once its back up
Hopefully not much longer, but I don't have an ETA (it's in my providers hands ATM)
June 09, 2014, 05:48:43 PM
Issue with master server -- its being looked into, completely offline at present
What is the issue? I just requested payouts on several coins about 40 mins ago, right before this happened. Some of the coins are showing as pending but not confirmed yet, some haven't even been sent. I hope this doesn't mess anything up with the payouts that were happening at the time the server has problems? Thanks merc82
June 09, 2014, 05:16:01 PM
Issue with master server -- its being looked into, completely offline at present
June 09, 2014, 03:06:09 PM
[07:38:09] Rejected 0b268235 Diff 0.090/0.068 GPU 2 Pool 0 (unauthorized worker)
This happens when the pool switches to a different coin and is normal. What you chould be complaining about is the retardedly high share difficulty level east1 and west1 rise up to after a few min. So you get
GPU 0: Share above target
GPU 1: Share above target
for 15 fucking minutes because the server op is trying to pay for less bandwidth.
And If you set scan time to 30 and expiry to 120, you see this:
Network diff set to 37
Stratum from Pool 0 detected new block
Network diff set to 38
Stratum from Pool 0 detected new block
For another 15 godamn minutes.
Our payouts are garbage lately unless you restart your miner every 3 min before the east1 and west1 auto adjusts to a penis shaped difficulty level.
This happens when the pool switches to a different coin and is normal. What you chould be complaining about is the retardedly high share difficulty level east1 and west1 rise up to after a few min. So you get
GPU 0: Share above target
GPU 1: Share above target
for 15 fucking minutes because the server op is trying to pay for less bandwidth.
And If you set scan time to 30 and expiry to 120, you see this:
Network diff set to 37
Stratum from Pool 0 detected new block
Network diff set to 38
Stratum from Pool 0 detected new block
For another 15 godamn minutes.
Our payouts are garbage lately unless you restart your miner every 3 min before the east1 and west1 auto adjusts to a penis shaped difficulty level.
I get the same thing from time to time and was wondering why that happened. Is that really because of bandwidth issues on the TMB site or something I can fix. It is quite annoying seeing happen over and over again.
Odd, I'm not aware of the difficulty getting out of control on east/west stratum's, which algo?
There is no way for me to pinpoint it to something specific but I have noticed what the other guy had said. It will just say Stratum from Pool 0 detected new block. I just assumed no work was being done, didn't realize difficulty had gone up or something.
June 09, 2014, 02:59:15 PM
[07:38:09] Rejected 0b268235 Diff 0.090/0.068 GPU 2 Pool 0 (unauthorized worker)
This happens when the pool switches to a different coin and is normal. What you chould be complaining about is the retardedly high share difficulty level east1 and west1 rise up to after a few min. So you get
GPU 0: Share above target
GPU 1: Share above target
for 15 fucking minutes because the server op is trying to pay for less bandwidth.
And If you set scan time to 30 and expiry to 120, you see this:
Network diff set to 37
Stratum from Pool 0 detected new block
Network diff set to 38
Stratum from Pool 0 detected new block
For another 15 godamn minutes.
Our payouts are garbage lately unless you restart your miner every 3 min before the east1 and west1 auto adjusts to a penis shaped difficulty level.
This happens when the pool switches to a different coin and is normal. What you chould be complaining about is the retardedly high share difficulty level east1 and west1 rise up to after a few min. So you get
GPU 0: Share above target
GPU 1: Share above target
for 15 fucking minutes because the server op is trying to pay for less bandwidth.
And If you set scan time to 30 and expiry to 120, you see this:
Network diff set to 37
Stratum from Pool 0 detected new block
Network diff set to 38
Stratum from Pool 0 detected new block
For another 15 godamn minutes.
Our payouts are garbage lately unless you restart your miner every 3 min before the east1 and west1 auto adjusts to a penis shaped difficulty level.
I get the same thing from time to time and was wondering why that happened. Is that really because of bandwidth issues on the TMB site or something I can fix. It is quite annoying seeing happen over and over again.
Odd, I'm not aware of the difficulty getting out of control on east/west stratum's, which algo?
June 09, 2014, 02:52:57 PM
yes it's working fine on every pool, I just double checked
thanks, will try your config. Btw which version do u use? I use 06062014..(for windows)06.06.2014. win32
I tried ur config, but still the same.. which os are u using? I use win8.1 64bit.
With the help of Elun, my problem is discovered.
I have 4x7950+6970, I had to disable my 6970 cause multi-algo isn't working yet.
If I use "device" : "0,2,3,4" than I had the problem. If I delete the device setting everything works fine except the 6970 git hw-errors because of marucoin-mod.
So multi device settings isn't working yet, a bug.
June 09, 2014, 02:51:51 PM
[07:38:09] Rejected 0b268235 Diff 0.090/0.068 GPU 2 Pool 0 (unauthorized worker)
This happens when the pool switches to a different coin and is normal. What you chould be complaining about is the retardedly high share difficulty level east1 and west1 rise up to after a few min. So you get
GPU 0: Share above target
GPU 1: Share above target
for 15 fucking minutes because the server op is trying to pay for less bandwidth.
And If you set scan time to 30 and expiry to 120, you see this:
Network diff set to 37
Stratum from Pool 0 detected new block
Network diff set to 38
Stratum from Pool 0 detected new block
For another 15 godamn minutes.
Our payouts are garbage lately unless you restart your miner every 3 min before the east1 and west1 auto adjusts to a penis shaped difficulty level.
This happens when the pool switches to a different coin and is normal. What you chould be complaining about is the retardedly high share difficulty level east1 and west1 rise up to after a few min. So you get
GPU 0: Share above target
GPU 1: Share above target
for 15 fucking minutes because the server op is trying to pay for less bandwidth.
And If you set scan time to 30 and expiry to 120, you see this:
Network diff set to 37
Stratum from Pool 0 detected new block
Network diff set to 38
Stratum from Pool 0 detected new block
For another 15 godamn minutes.
Our payouts are garbage lately unless you restart your miner every 3 min before the east1 and west1 auto adjusts to a penis shaped difficulty level.
I get the same thing from time to time and was wondering why that happened. Is that really because of bandwidth issues on the TMB site or something I can fix. It is quite annoying seeing happen over and over again.
June 09, 2014, 12:01:31 PM
Dont run this new SGMiner 5 from CGWatcher, it will not honor the pool-specific algo.
Got two problems still:
1) Switch from algo to algo takes 20-30 sec, which is way too much
2) Miner stops submitting shares after some time (prolly miners bug, I got latest from repo)
Got two problems still:
1) Switch from algo to algo takes 20-30 sec, which is way too much
2) Miner stops submitting shares after some time (prolly miners bug, I got latest from repo)
June 09, 2014, 11:54:26 AM
yes it's working fine on every pool, I just double checked
thanks, will try your config. Btw which version do u use? I use 06062014..(for windows)06.06.2014. win32
I tried ur config, but still the same.. which os are u using? I use win8.1 64bit.
June 09, 2014, 09:26:25 AM
yes it's working fine on every pool, I just double checked
thanks, will try your config. Btw which version do u use? I use 06062014..(for windows)06.06.2014. win32
Jump to: