Pages:
Author

Topic: [ANN][MULTI][VARDIFF] TradeMyBit MULTIALGO Profit Swap w/ Optional Auto-exchange - page 63. (Read 153100 times)

member
Activity: 69
Merit: 10
First, I love this pool - the only one that features a Scrypt-N port as far as I know.

Are you planning on adding any more Scrypt-N coins? I notice that many new coins are using this algorithm and it would be nice to have more coins to compare profitability between than PANDA and VTC.
hero member
Activity: 742
Merit: 500
Check your miner settings again. Today was bad luck on multiport, which is actually reported on the main page. Try multiportN when multiport is not performing well. With 2Mh (1m on scryptn) you should have much more. I Had for 13 hours ~0,005 with 600khs.
member
Activity: 91
Merit: 10
“Create Your Decentralized Life”
I feel like my experience with this pool is far different than some others.  My payouts have been consistently under the announced btc/mh.  For instance, I moved my 2.7 mhs to the pool around 24 hours ago.  My account already had a balance of around .007 btc and my payout today was only .0175 btc.  I am not experiencing a large amount of hw errors or rejects.  Today was the biggest discrepancy between the announced payout and my payout but I have almost always been lower than expected.  I am using the same settings as I do on dozens of other pools where I consistently get paid approximately what I expect to get paid.  This is the first multi pool I've used and it has been very disappointing.  I'm pretty sure I would make way more just mining LTC.
hero member
Activity: 742
Merit: 500
full member
Activity: 177
Merit: 100
What does it take to get an invite to mine with this pool?
dnp
full member
Activity: 401
Merit: 110
where do i send a message to request payout of my current autoexchanged btc balance?
thanks.
full member
Activity: 129
Merit: 100
I have 1 machines on 3.0 mh. If invites are possible : [email protected]
 Thank you

I'd be more than happy to set a worker up for you if you want to point your 3mh at this pool for me:)
newbie
Activity: 3
Merit: 0
Is IRC down?

Haven't seemed to be able to connect all morning ;(

-BoxX
sr. member
Activity: 336
Merit: 250
sr. member
Activity: 248
Merit: 250
Are there averages as btc profitability per mH for this pool ?
I can't seem to find any profitability info on the pool front page.
newbie
Activity: 29
Merit: 0
Perhaps we should add Auroracoin?
full member
Activity: 238
Merit: 100
I think that merc should strongly recommend everyone to set up a donation amount. He is doing hard work by picking and investigating new coins. For a moment it's the best and most "transparent" multipool.
I think it's good idea to setup new accounts with for example 1-2% minimum donation and disable users who are not donating or using the pool as failover.

I was just thinking the same thing. I'm sure Merc will let us know if the increased hashrate requires additional overhead.

(Being here is like having an additional head around helping you navigate all of these altcoins). I decided to turn everything on autotrade, until we bear bottom.
Very proud to be a early member, this pool is really turning out.
full member
Activity: 155
Merit: 100
I have 1 machines on 3.0 mh. If invites are possible : [email protected]
 Thank you
member
Activity: 179
Merit: 10
I think that merc should strongly recommend everyone to set up a donation amount. He is doing hard work by picking and investigating new coins. For a moment it's the best and most "transparent" multipool.
I think it's good idea to setup new accounts with for example 1-2% minimum donation and disable users who are not donating or using the pool as failover.
It makes sense if everyday's profitability is more then 0.01 btc/mh. I'm mining here more than a month and I had such profitability only once, it was yesterday. All other days it is less and usually equal 0.09... which is pretty the same as mining at another multipools.
newbie
Activity: 46
Merit: 0
I think that merc should strongly recommend everyone to set up a donation amount. He is doing hard work by picking and investigating new coins. For a moment it's the best and most "transparent" multipool.
I think it's good idea to setup new accounts with for example 1-2% minimum donation and disable users who are not donating or using the pool as failover.
newbie
Activity: 33
Merit: 0
I have nothing but good things to say about this pool Cheesy  I haven't found a better profit switching pool.  The admin is active and updates regularly, both here and on the pool website. 

Nuff said Wink
newbie
Activity: 10
Merit: 0
I hear good things about this pool. I have 2 machines one 3.5mh and one 3.31mh. If invites are possible : [email protected]
I will add one or two depending on your suggestion. Thank you in advance.
newbie
Activity: 11
Merit: 0
stratum-us 3330 rejecting new connections?
I had to restart a worker and now it is reporting dead.  It's odd since I have another worker on the same computer connected and hashing.

Yesterday evening I had the same problem with most coins, only multimort and emd worked. I think that this problem is already solved, today I did not have any troubles connectring to another pools. On other side I did not care about other pools than multiport, payouts were great tonight.

@merc
It would be great to have a possibility to change password/worker name or even to delete worker. I've set too long pass for one worker so I can't use him.
The same....
sr. member
Activity: 294
Merit: 250
That would be nice option.
hero member
Activity: 742
Merit: 500
stratum-us 3330 rejecting new connections?
I had to restart a worker and now it is reporting dead.  It's odd since I have another worker on the same computer connected and hashing.

Yesterday evening I had the same problem with most coins, only multimort and emd worked. I think that this problem is already solved, today I did not have any troubles connectring to another pools. On other side I did not care about other pools than multiport, payouts were great tonight.

@merc
It would be great to have a possibility to change password/worker name or even to delete worker. I've set too long pass for one worker so I can't use him.
Pages:
Jump to: