Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 33.

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: adqsonline on August 05, 2014, 08:21:59 PM

Quote from: adqsonline on August 05, 2014, 06:40:35 PM

Quote from: Swimmer63 on August 05, 2014, 05:02:44 PM

Quote from: adqsonline on August 05, 2014, 03:11:58 PM

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

Check to make sure your pools are set up correctly.
You may have to unplug the miner and restart it. Rebooting does always reset everything properly.
Suggest you use DNS of 8.8.8.8

Thank you for ur reply.

I am trying to isolate the problem with help of you members. And once that both machines have similar problems which i find unusual it could be a router problem or internet problem. I am asking this because besides this 2 machines i have 3 previous Antminers S3 hashing normally at good rate and i wounder if i have enough internet or router for more machines.

The problem isnt either Internet or Router, i am more sure now that's about Antminer control border or its ethernet port.

Maybe reset to factory default and try again.

adqsonline

newbie

Activity: 41

Merit: 0

Quote from: adqsonline on August 05, 2014, 06:40:35 PM

Quote from: Swimmer63 on August 05, 2014, 05:02:44 PM

Quote from: adqsonline on August 05, 2014, 03:11:58 PM

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

Check to make sure your pools are set up correctly.
You may have to unplug the miner and restart it. Rebooting does always reset everything properly.
Suggest you use DNS of 8.8.8.8

Thank you for ur reply.

I am trying to isolate the problem with help of you members. And once that both machines have similar problems which i find unusual it could be a router problem or internet problem. I am asking this because besides this 2 machines i have 3 previous Antminers S3 hashing normally at good rate and i wounder if i have enough internet or router for more machines.

The problem isnt either Internet or Router, i am more sure now that's about Antminer control border or its ethernet port.

adqsonline

newbie

Activity: 41

Merit: 0

Quote from: Swimmer63 on August 05, 2014, 05:02:44 PM

Quote from: adqsonline on August 05, 2014, 03:11:58 PM

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

Check to make sure your pools are set up correctly.
You may have to unplug the miner and restart it. Rebooting does always reset everything properly.
Suggest you use DNS of 8.8.8.8

Thank you for ur reply.

I am trying to isolate the problem with help of you members. And once that both machines have similar problems which i find unusual it could be a router problem or internet problem. I am asking this because besides this 2 machines i have 3 previous Antminers S3 hashing normally at good rate and i wounder if i have enough internet or router for more machines.

xstr8guy

hero member

Activity: 784

Merit: 1004

Glow Stick Dance!

Quote from: adqsonline link=topic=330665.msg8202499#msg8202499

Ok i am doing 1 machine at time (i never connect 2 machines at the same time). Lets start by IP config.

I have 3 previous machines that uses the following ip's( they all work very well):
192.168.1.155
.... ..... ... 156
..... .... .... 157
Now for this new machine i set up the ip 192.168.1.158 but it still logs me off everytime i want to perform an action in control panel.

if i changed the ip what option i should click in this machine at least to make it working? Reboot? Reset? Firmware, i already tried the 2 available on the website?
Thanks

Some other equipment is probably using .158. Use an IP Scanner to find an unused address.

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: adqsonline on August 05, 2014, 03:11:58 PM

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

Check to make sure your pools are set up correctly.
You may have to unplug the miner and restart it. Rebooting does always reset everything properly.
Suggest you use DNS of 8.8.8.8

adqsonline

newbie

Activity: 41

Merit: 0

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

adqsonline

newbie

Activity: 41

Merit: 0

Quote from: allcoinminer on August 05, 2014, 11:01:00 AM

Quote from: adqsonline on August 05, 2014, 10:06:20 AM

Quote from: ?? on ??

Quote from: adqsonline on August 05, 2014, 07:59:35 AM

Yesterday i got 2 Antminers S3 from Batch 4.

Both of machines doesnt work. Would like to have your help. To not complicate today i will ask help for the first one.

Machine allways logs me of when i try to access control panel through the IP. When i try to make any performance logs me off again.

I tried to resset the machine in control panel and in the hole of machine but nothing.

Doesnt accept also the download of firmware because instead logs me off.

I am feeling powerless over this machine because nothing appears to respond to my actions allways getting logged of.

You aren't trying to set them both up at the same time are you?

Keep 1 offline, set 1 up with a static IP/settings and then power up your 2nd one. You could be having IP conflicts between the 2 units.

Hi, i allways set up my machines 1 at the time. Everything is wrong with them. Doesnt mines, doesnt appear the chains in miner status, most of the times i try to take any action and it logs me off to the login pannel. I am guessing that i have spent almost 1000 euros to through to the garbage. Already tried to replace the firmware and nothing.
I have machines from Batch 2 that works perfectly. Dont know anymore what to do as i dont know how its possible to send so disfunctional machines to costumers if they try them first. No reply from support.

Open the cover of this machine and look of any loose cables, unplug them one by one and reconnect.
Also, getting logged off like yours means you have an IP conflict.
It can be of many reasons. So just change your miner IP to a different one like 192.168.1.95
If not working change it to 192.168.1.105 and try again.
Post a screenshot of your Miner Status page and WAN settings page here if its still not working.

Ok i am doing 1 machine at time (i never connect 2 machines at the same time). Lets start by IP config.

I have 3 previous machines that uses the following ip's( they all work very well):
192.168.1.155
.... ..... ... 156
..... .... .... 157
Now for this new machine i set up the ip 192.168.1.158 but it still logs me off everytime i want to perform an action in control panel.

if i changed the ip what option i should click in this machine at least to make it working? Reboot? Reset? Firmware, i already tried the 2 available on the website?
Thanks

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: adqsonline on August 05, 2014, 10:06:20 AM

Quote from: ?? on ??

Quote from: adqsonline on August 05, 2014, 07:59:35 AM

Yesterday i got 2 Antminers S3 from Batch 4.

Both of machines doesnt work. Would like to have your help. To not complicate today i will ask help for the first one.

Machine allways logs me of when i try to access control panel through the IP. When i try to make any performance logs me off again.

I tried to resset the machine in control panel and in the hole of machine but nothing.

Doesnt accept also the download of firmware because instead logs me off.

I am feeling powerless over this machine because nothing appears to respond to my actions allways getting logged of.

You aren't trying to set them both up at the same time are you?

Keep 1 offline, set 1 up with a static IP/settings and then power up your 2nd one. You could be having IP conflicts between the 2 units.

Hi, i allways set up my machines 1 at the time. Everything is wrong with them. Doesnt mines, doesnt appear the chains in miner status, most of the times i try to take any action and it logs me off to the login pannel. I am guessing that i have spent almost 1000 euros to through to the garbage. Already tried to replace the firmware and nothing.
I have machines from Batch 2 that works perfectly. Dont know anymore what to do as i dont know how its possible to send so disfunctional machines to costumers if they try them first. No reply from support.

Open the cover of this machine and look of any loose cables, unplug them one by one and reconnect.
Also, getting logged off like yours means you have an IP conflict.
It can be of many reasons. So just change your miner IP to a different one like 192.168.1.95
If not working change it to 192.168.1.105 and try again.
Post a screenshot of your Miner Status page and WAN settings page here if its still not working.

adqsonline

newbie

Activity: 41

Merit: 0

Quote from: ?? on ??

Quote from: adqsonline on August 05, 2014, 07:59:35 AM

Yesterday i got 2 Antminers S3 from Batch 4.

Both of machines doesnt work. Would like to have your help. To not complicate today i will ask help for the first one.

Machine allways logs me of when i try to access control panel through the IP. When i try to make any performance logs me off again.

I tried to resset the machine in control panel and in the hole of machine but nothing.

Doesnt accept also the download of firmware because instead logs me off.

I am feeling powerless over this machine because nothing appears to respond to my actions allways getting logged of.

You aren't trying to set them both up at the same time are you?

Keep 1 offline, set 1 up with a static IP/settings and then power up your 2nd one. You could be having IP conflicts between the 2 units.

Hi, i allways set up my machines 1 at the time. Everything is wrong with them. Doesnt mines, doesnt appear the chains in miner status, most of the times i try to take any action and it logs me off to the login pannel. I am guessing that i have spent almost 1000 euros to through to the garbage. Already tried to replace the firmware and nothing.
I have machines from Batch 2 that works perfectly. Dont know anymore what to do as i dont know how its possible to send so disfunctional machines to costumers if they try them first. No reply from support.

lovenlifelarge

hero member

Activity: 676

Merit: 501

How do i get my 10% off my next order & why is bitmain not selling those switches as a part of a 2 unit order?
Just add the price into the sale??

BTW nothing wrong with my S3-B3 works perfectly!

adqsonline

newbie

Activity: 41

Merit: 0

Yesterday i got 2 Antminers S3 from Batch 4.

Both of machines doesnt work. Would like to have your help. To not complicate today i will ask help for the first one.

Machine allways logs me of when i try to access control panel through the IP. When i try to make any performance logs me off again.

I tried to resset the machine in control panel and in the hole of machine but nothing.

Doesnt accept also the download of firmware because instead logs me off.

I am feeling powerless over this machine because nothing appears to respond to my actions allways getting logged of.

Reven79

newbie

Activity: 13

Merit: 0

Quote from: Trimegistus on August 02, 2014, 04:23:37 AM

Quote from: captainpugwash on August 01, 2014, 12:34:06 PM

Quote

Bitmain is a good company, pretty much right now the only good company out there in regards to miner manufacturing. No worries

I agree, Bitmain always delivered, product does as it should and doesn't breakdown.

Slightly concerned that I've heard nothing for a few days now.

I've had no more emails from Bitmain other than order confirmation from batch 5 Sad

I just got my Batch 5 shipping confirmation. 5 days ahead of schedule... ! YES! Grin

BTW, anyone got the coupons or the 7.7% refund? How does it work? Huh

I ordered a set of S3s from Batch 1 and about 3 days after the offer I decided to go with the 7.77% refund. I wasn't until 7/28/2014 that I actually received that refund so I have no idea how that will relate to other batches.

adqsonline

newbie

Activity: 41

Merit: 0

Quote from: allcoinminer on August 04, 2014, 03:43:00 PM

Quote from: adqsonline on August 04, 2014, 03:38:26 PM

Quote from: allcoinminer on August 04, 2014, 03:20:01 PM

Quote from: adqsonline on August 04, 2014, 02:39:41 PM

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

As per your post the one miner in your S3 where the fan rpm is lower in batch 4 is loaded with older firmware.
The other one which do not have a green steady led is loaded with the latest firmware.
Most of the users reported the S3 Batch 4 fan above 4000-10000 and bitmaintech not yet responded to it.
Inshort it seems like all your miners are mining good with normal readings and need to do anything now.

Thank you for your answer, but 1 of them makes only the fan noise apart that no lights at all, is like it only connects the fans for example. About the one with steady green light no steady hash power.

No green light and unsteady hashing mean its a Batch 1 or 2 or 3 miner with older firmware even though you ordered from batch 4 or 5.
Update this miner with the latest firmware.
/edit

Yes i can confirm the firmware of this batch 4 is the same of my batch 2 machines. But i have 3 units of batch 3 that works very fine with a green light blinking when mining.
I am also more worried with my other unit of batch 4 which doesnt have lights at all, it looks like that only works the fans, apart that no lights at all.
Tomorrrow i will take a look at both machines. Now i need to reboot my brains with a good night sleep lol
Thanks for the help.

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: adqsonline on August 04, 2014, 03:38:26 PM

Quote from: allcoinminer on August 04, 2014, 03:20:01 PM

Quote from: adqsonline on August 04, 2014, 02:39:41 PM

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

As per your post the one miner in your S3 where the fan rpm is lower in batch 4 is loaded with older firmware.
The other one which do not have a green steady led is loaded with the latest firmware.
Most of the users reported the S3 Batch 4 fan above 4000-10000 and bitmaintech not yet responded to it.
Inshort it seems like all your miners are mining good with normal readings and need to do anything now.

Thank you for your answer, but 1 of them makes only the fan noise apart that no lights at all, is like it only connects the fans for example. About the one with steady green light no steady hash power.

No green light and unsteady hashing mean its a Batch 1 or 2 or 3 miner with older firmware even though you ordered from batch 4 or 5.
Update this miner with the latest firmware.
/edit

adqsonline

newbie

Activity: 41

Merit: 0

Quote from: allcoinminer on August 04, 2014, 03:20:01 PM

Quote from: adqsonline on August 04, 2014, 02:39:41 PM

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

As per your post the one miner in your S3 where the fan rpm is lower in batch 4 is loaded with older firmware.
The other one which do not have a green steady led is loaded with the latest firmware.
Most of the users reported the S3 Batch 4 fan above 4000-10000 and bitmaintech not yet responded to it.
Inshort it seems like all your miners are mining good with normal readings and need to do anything now.

Thank you for your answer, but 1 of them makes only the fan noise apart that no lights at all, is like it only connects the fans for example. About the one with steady green light no steady hash power.

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: adqsonline on August 04, 2014, 02:39:41 PM

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

As per your post the one miner in your S3 where the fan rpm is lower in batch 4 is loaded with older firmware.
The other one which do not have a green steady led is loaded with the latest firmware.
Most of the users reported the S3 Batch 4 fan above 4000-10000 and bitmaintech not yet responded to it.
Inshort it seems like all your miners are mining good with normal readings and need to do anything now.

adqsonline

newbie

Activity: 41

Merit: 0

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

martijntje

newbie

Activity: 21

Merit: 0

OK, will go ahead with the order then. Thanks guys.

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: martijntje on August 03, 2014, 11:52:21 PM

If I place an order now, would it be shipped on or shortly after the 7nd? Or is that batch already fully pre-ordered?

It will be shipped on August 7 as per the website.
They are delivering so there should be no risk of that kind. Its already an established miner.
You can order it now.

rhj12345

full member

Activity: 138

Merit: 100

Quote from: martijntje on August 03, 2014, 11:52:21 PM

If I place an order now, would it be shipped on or shortly after the 7nd? Or is that batch already fully pre-ordered?

Go ahead an order what you need. If they were sold out it would say that on the product page. But like it says on the web site shipping is on or after Aug 7, I have 2 myself I am waiting on from this batch.

Hope this helps. Cool

Topic: Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 33. (Read 368338 times)