I placed my order 16th februari, will it also pre-ship? Can i expect my miners to ship out tomorrow?
Of course. Basically they managed to get everyone's orders boxed up and ready to go three days earlier than originally planned
Topic: Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 92. (Read 368330 times)
February 24, 2014, 02:58:54 PM
Of course. Basically they managed to get everyone's orders boxed up and ready to go three days earlier than originally planned
February 24, 2014, 01:57:49 PM
I placed my order 16th februari, will it also pre-ship? Can i expect my miners to ship out tomorrow?
February 24, 2014, 01:18:41 PM
I made a full payment [made using one transaction] was first verified on the blockchain about three minutes after my order submission, and has since been verified almost 200 times since then. The status column for my order says "Paid Unshipped Valid" but I have yet to receive an email with my shipping info, or get a response from anyone within the company.
Anyone else experience this?
Anyone else experience this?
Lots do. Bitmain is really good about shipping, but not so good about communication.
February 24, 2014, 01:14:40 PM
From Bitmain's site:
I made a full payment [using one transaction] which was first verified on the blockchain about three minutes after my order submission, and has since been verified almost 200 times since then. The status column for my order says "Paid Unshipped Valid" but I have yet to receive an email with my shipping info, or get a response from anyone within the company.
Anyone else experience this?
Quote
Please note:
You must make a payment within 1 hour, or your order will be cancelled
As soon as your payment is received in full you will receive email confirmation with order delivery details.
You may send payments from multiple accounts to reach the total required.
You must make a payment within 1 hour, or your order will be cancelled
As soon as your payment is received in full you will receive email confirmation with order delivery details.
You may send payments from multiple accounts to reach the total required.
I made a full payment [using one transaction] which was first verified on the blockchain about three minutes after my order submission, and has since been verified almost 200 times since then. The status column for my order says "Paid Unshipped Valid" but I have yet to receive an email with my shipping info, or get a response from anyone within the company.
Anyone else experience this?
February 24, 2014, 08:14:51 AM
They said the cash price was 900 a piece in an email. I think i'll just wait the 3 days to convert it from coinbase and save 1200 bucks. Although with 25 machines i would get about 1500 in 3 days of mining....
February 24, 2014, 05:14:33 AM
Nice shipping tomorrow! Bitmain, i want 25 of these things. Give me a price!!
25 is nothing...
February 24, 2014, 04:49:02 AM
I'm an AntMiner noob, what do Bitmain mean by pre-shipping?
They said they would start shipping on 28th, but they are pre-shipping
February 23, 2014, 10:01:12 PM
Nice shipping tomorrow! Bitmain, i want 25 of these things. Give me a price!!
thats easy. 1.45btc each
even if you buy 200, still 1.45 each
February 23, 2014, 09:41:47 PM
Nice shipping tomorrow! Bitmain, i want 25 of these things. Give me a price!!
February 23, 2014, 09:17:16 PM
Funny thing is the 24 pin Bridge connectors I ordered wont be on time. Looks like paper clip for a few days. This has to be one of the best problems I have had with ASIC vendor!
so, let me ask this... you have an antminer, or two running on a psu with a paper clip.... are you going to stop them to put in your fancy 24 pin Bridge connector?
I haved used many paper clips.. but in a pinch at the new warehouse i was out... looking around and in my tool bag I had a clip of 1 inch bostich staples... pulled off one and now I'm hooked.. using the stables cause with the paper clip i have to zip tie it.. the staple sits right in there with nothing..
Hell no. only if I have to take them down for something else.
February 23, 2014, 09:00:05 PM
Funny thing is the 24 pin Bridge connectors I ordered wont be on time. Looks like paper clip for a few days. This has to be one of the best problems I have had with ASIC vendor!
so, let me ask this... you have an antminer, or two running on a psu with a paper clip.... are you going to stop them to put in your fancy 24 pin Bridge connector?
I haved used many paper clips.. but in a pinch at the new warehouse i was out... looking around and in my tool bag I had a clip of 1 inch bostich staples... pulled off one and now I'm hooked.. using the stables cause with the paper clip i have to zip tie it.. the staple sits right in there with nothing..
February 23, 2014, 08:34:26 PM
I'm an AntMiner noob, what do Bitmain mean by pre-shipping?
February 23, 2014, 08:26:40 PM
Funny thing is the 24 pin Bridge connectors I ordered wont be on time. Looks like paper clip for a few days. This has to be one of the best problems I have had with ASIC vendor!
February 23, 2014, 01:35:45 PM
February 23, 2014, 01:08:21 PM
YAY!!!! My Ant is shipping tomorrow 
From Bitmain website:
PRE-SHIPMENT!
All units orderred before 11:00pm BeiJing time Feb 23rd, will be shipped out on Feb 24th and Feb 25th.
BITMAIN always do the fastest shipment !!!
From Bitmain website:
PRE-SHIPMENT!
All units orderred before 11:00pm BeiJing time Feb 23rd, will be shipped out on Feb 24th and Feb 25th.
BITMAIN always do the fastest shipment !!!
YEEAAAHHHHHHH!!!!!!!!!!!!!!!!!!
February 23, 2014, 11:49:30 AM
YAY!!!! My Ant is shipping tomorrow
From Bitmain website:
PRE-SHIPMENT!
All units orderred before 11:00pm BeiJing time Feb 23rd, will be shipped out on Feb 24th and Feb 25th.
BITMAIN always do the fastest shipment !!!
From Bitmain website:
PRE-SHIPMENT!
All units orderred before 11:00pm BeiJing time Feb 23rd, will be shipped out on Feb 24th and Feb 25th.
BITMAIN always do the fastest shipment !!!
February 23, 2014, 10:10:07 AM
shalalala Preshipping!
Bitmain > All
Bitmain > All
February 22, 2014, 07:51:53 AM
BREAKING NEWS!!!!!
CURRENTLY IN DEVELOPMENT!!!!!
The Antminator S1 is based on our latest technology of 1nm Chips and Nano technology.
It punches an astonishing 180PH power and......
It fits in the palm of your hand!!!!!
The best of all, it consumes 0 ELECTRICITY!!!!!!!!
Its nano solar panels charge the nano battery so all you need is the minimum amount of sunlight you can get per day!!!!
Pre orders yours today only BTC10,000
Shipping starts Q1 2050.
CURRENTLY IN DEVELOPMENT!!!!!
The Antminator S1 is based on our latest technology of 1nm Chips and Nano technology.
It punches an astonishing 180PH power and......
It fits in the palm of your hand!!!!!
The best of all, it consumes 0 ELECTRICITY!!!!!!!!
Its nano solar panels charge the nano battery so all you need is the minimum amount of sunlight you can get per day!!!!
Pre orders yours today only BTC10,000
Shipping starts Q1 2050.
February 21, 2014, 10:17:30 PM
February 21, 2014, 09:45:36 PM
Anybody have problems with their AntMiner Just shutting itself off Randomly ??
sounds like a faulty or underpowered psu. Is your ant overclocked? and what is your psu that you are using for it?
My First Unit was a 600 Watt one ...
my Any is not Over clocked at all
The new Power Supply is a Coolmax ZU-700B 700 Watt
Have you tried putting a +5v load on it? I have that PSU (coolmax zu-700b) and it requires a +5v load to stay running. I connected an old CDROM drive to mine and it runs 24/7 just fine.
Connected a CDROM drive to it and comes up mines for like 5 minutes and still shuts itself off ... I took the power supply from a Scrypt mining box we upgraded and it ran fine in there , Unless the ANT is defective then im like not so sure about shipping to China .
It sure sounds like a PSU problem. In the Setup & Troubleshoot guide, scroll down to the Troubleshooting section and follow the steps in bullet point 3 to make sure the PSU is setup/connected correctly and to test each blade individually. If each blade runs fine by itself then it's a PSU issue according to the guide.
https://bitcointalksearch.org/topic/m.3696062
Well ... So i decided last night to try something and it seems to work at least for the last 12 hours , I hooked a mother board up to the power supply also .. and put it in bios , Now its staying on .. Weird but hopefully this works long term !
Did you not do the jump wire trick?
I did indeed try the trick this power supply did not seem to like that , So i this way it works and the motherboard uses very little power !
Jump to: