Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 96.

papamoi

sr. member

Activity: 378

Merit: 250

Quote from: Unacceptable on February 18, 2014, 04:12:20 AM

Quote from: papamoi on February 18, 2014, 03:26:13 AM

Quote from: Unacceptable on February 18, 2014, 03:16:24 AM

Quote from: papamoi on February 18, 2014, 03:14:44 AM

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?

some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too Huh

bitminter, and else

Ok,give me a little while,I'm mining there now to see what works Wink

It connected & started mining,but makin sure I get full power!! Cheesy

stratum+tcp://mint.bitminter.com:3333 is what I'm using...for the moment.

did you had to manage anything in the router port?
so stratum+tcp is fine?

maybe the issue of rebooting is coming from my psu...

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: papamoi on February 18, 2014, 03:26:13 AM

Quote from: Unacceptable on February 18, 2014, 03:16:24 AM

Quote from: papamoi on February 18, 2014, 03:14:44 AM

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?

some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too Huh

bitminter, and else

Ok,give me a little while,I'm mining there now to see what works Wink

It connected & started mining,but makin sure I get full power!! Cheesy

stratum+tcp://mint.bitminter.com:3333 is what I'm using...for the moment.

papamoi

sr. member

Activity: 378

Merit: 250

Quote from: Unacceptable on February 18, 2014, 03:16:24 AM

Quote from: papamoi on February 18, 2014, 03:14:44 AM

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?

some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too Huh

bitminter, and else

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: papamoi on February 18, 2014, 03:14:44 AM

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?

some told me they have remove the stratum+tcp

Seriously,what pool are you trying to connect too Huh

papamoi

sr. member

Activity: 378

Merit: 250

Beside this gay loashia who keep on licking everybody ass,anyone have the same issue?

some told me they have remove the stratum+tcp

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Unacceptable on February 18, 2014, 03:00:47 AM

Quote from: loshia on February 18, 2014, 02:22:25 AM

Quote from: papamoi on February 18, 2014, 02:16:13 AM

hi guys

i ve tried to set it up:

the machine is rebooting and after worker config

(i m not sure how to write the pools adress ,need to write the startum+tcp or not?

i don t see anything appearing in miner status and the machine is keeping on reboot every 2/3 min

solution guys??

Super I am glad to hear it Grin

Ask for volume discount and you can get an USER MANUAL for free Grin

you are pathetic papamoi Grin

----------------
(i m not sure how to write the pools adress ,need to write the startum+tcp or not?
---------------------

that made my day Grin

How do you expect to make any BTC related business when you do miss the basics Huh

Any way make a group buy and collect 2 or 3 times from what you are going to pay because of volume discount. This is the only thing which brainless idiot ca do Grin

The questions is how many brainless idiots (bigger than you) are left to send you their BTC Grin

Not to defend him,but if his network is anything other than...modem-->router,it can be a bit of a bear Wink

But setting up a pool addy (check at your pool's website for instructions) in these is too simple,hell,I'm a moron in regard to networking & software.

I can't even compile CGminer & I had my Ants up & mining in about 5 minutes,had to wait for changes to take effect took half that time up Cheesy

I am thankful in behalf of papmoi Grin

Thank you vey much Unacceptable Wink

Papamoi, as you see even morons can cope with such things. I am wondering if bigger idiot theory still works Huh

Or you papamoi are the biggest idiot of them all Grin

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: loshia on February 18, 2014, 02:22:25 AM

Quote from: papamoi on February 18, 2014, 02:16:13 AM

hi guys

i ve tried to set it up:

the machine is rebooting and after worker config

(i m not sure how to write the pools adress ,need to write the startum+tcp or not?

i don t see anything appearing in miner status and the machine is keeping on reboot every 2/3 min

solution guys??

Super I am glad to hear it Grin

Ask for volume discount and you can get an USER MANUAL for free Grin

you are pathetic papamoi Grin

----------------
(i m not sure how to write the pools adress ,need to write the startum+tcp or not?
---------------------

that made my day Grin

How do you expect to make any BTC related business when you do miss the basics Huh

Any way make a group buy and collect 2 or 3 times from what you are going to pay because of volume discount. This is the only thing which brainless idiot ca do Grin

The questions is how many brainless idiots (bigger than you) are left to send you their BTC Grin

Not to defend him,but if his network is anything other than...modem-->router,it can be a bit of a bear Wink

But setting up a pool addy (check at your pool's website for instructions) in these is too simple,hell,I'm a moron in regard to networking & software.

I can't even compile CGminer & I had my Ants up & mining in about 5 minutes,had to wait for changes to take effect took half that time up Cheesy

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: papamoi on February 18, 2014, 02:16:13 AM

hi guys

i ve tried to set it up:

the machine is rebooting and after worker config

(i m not sure how to write the pools adress ,need to write the startum+tcp or not?

i don t see anything appearing in miner status and the machine is keeping on reboot every 2/3 min

solution guys??

Super I am glad to hear it Grin

Ask for volume discount and you can get an USER MANUAL for free Grin

you are pathetic papamoi Grin

----------------
(i m not sure how to write the pools adress ,need to write the startum+tcp or not?
---------------------

that made my day Grin

How do you expect to make any BTC related business when you do miss the basics Huh

Any way make a group buy and collect 2 or 3 times from what you are going to pay because of volume discount. This is the only thing which brainless idiot ca do Grin

The questions is how many brainless idiots (bigger than you) are left to send you their BTC Grin

papamoi

sr. member

Activity: 378

Merit: 250

hi guys

i ve tried to set it up:

the machine is rebooting and after worker config

(i m not sure how to write the pools adress ,need to write the startum+tcp or not?

i don t see anything appearing in miner status and the machine is keeping on reboot every 2/3 min

solution guys??

freebit13

hero member

Activity: 616

Merit: 500

I got Satoshi's avatar!

Quote from: kryptoc007 on February 17, 2014, 05:50:21 PM

Quote from: eoakland on February 17, 2014, 04:27:40 PM

Quote from: S4VV4S on February 17, 2014, 03:32:37 PM

https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970
6. I see "x" in the ASIC Status

For the ASIC status wise, "x" doesn't necessary means the chip is faulty or failing. If the hashing power seems to be affected, please check your PSU and wiring and reboot and check the status a few times. It should go back to an average 168-180 gh/s range per AntMiner.

when you are getting "x" on the ASIC chip status, please turn off the antminer and double check your PSU cables are connected well and restart. Check the status in about 5 minutes and every 30 minutes for a few hours and see if the "x" are showing up constantly at the same chip or randomly changes or completely disappear.

"x's" do indicate the chip is failing or having issues---to my knowledge. power off the ant, give it a minute, then power back on....check if the Asics still have "x's".....contact either Sushi or Bitmain and ask them as to what they advise.

AND most definitely check your hashing speed with another site, slush is not the best for indicating speed, that site has had all kinds of issues lately.

thanks everyone for the help. After powering off/on I see only 2 Xs, but since I get approx 180 GH/s, I am going to leave it at that.

I had a bunch of X's showing up randomly, but proper cooling seems to have fixed the issue: https://bitcointalksearch.org/topic/m.5174775

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: meornot69 on February 17, 2014, 10:51:27 PM

hi,

Network   Protocol     Source     Destination     Transfer
IPV4     TCP   192.168.0.244:57834   unknown.servercentral.net:3333   14.58 KB (107 Pkts.)
IPV4     TCP   192.168.0.103:52635   192.168.0.244:80     6.55 KB (62 Pkts.)
IPV4     TCP   192.168.0.103:52637   192.168.0.244:80     2.57 KB (36 Pkts.)
IPV4     UDP   192.168.0.244:47585   wonder.bluepink.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:58324   ntp2.dooh.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:45263   wonder.bluepink.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:46730   ups.alsys.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:54204   ups.alsys.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:44309   89.149.54.18:123     76.00 B (1 Pkts.)

someone knows? what do they do those connections on upd port 123?

NTP - network time protocol

Your Antminer is updating/syncing it's clock. Normal.

meornot69

member

Activity: 87

Merit: 10

hi,

Network   Protocol     Source     Destination     Transfer
IPV4     TCP   192.168.0.244:57834   unknown.servercentral.net:3333   14.58 KB (107 Pkts.)
IPV4     TCP   192.168.0.103:52635   192.168.0.244:80     6.55 KB (62 Pkts.)
IPV4     TCP   192.168.0.103:52637   192.168.0.244:80     2.57 KB (36 Pkts.)
IPV4     UDP   192.168.0.244:47585   wonder.bluepink.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:58324   ntp2.dooh.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:45263   wonder.bluepink.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:46730   ups.alsys.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:54204   ups.alsys.ro:123     76.00 B (1 Pkts.)
IPV4     UDP   192.168.0.244:44309   89.149.54.18:123     76.00 B (1 Pkts.)

someone knows? what do they do those connections on upd port 123?

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: Epoch on February 17, 2014, 07:14:53 PM

Quote from: S.Z. on February 17, 2014, 07:08:10 PM

For best work antminer you must use local stratum proxy (in your network, ping must be 1-2ms) then speed goes to 200Gh\s

I know that antminer kan works without local proxy, but speed is lower for 30-40%.

Can anyone confirm this with the newer AntMiners?

I have a dozen and at least one from almost every GB. Never heard of this and never have a speed issue using ethernet.

pvnamk19

full member

Activity: 178

Merit: 100

@kryptoc007:
One of my Ants has xx on ASIC status and I just download the latest firmware from https://github.com/AntMiner/AntGen1/tree/master/firmware
- Download antMiner_openwrt20140207.bin to your computer.
- At Ant web page: select System => Backup/Flash Firmware and update the new firmware => proceed to reboot.

In my case I just use frequency 375 MHZ because I want to keep their Temp around 47-48: it boosts around 10GHz/ant.

Hope this help!

canford

member

Activity: 89

Merit: 10

I am running two Antminers, no proxy, just pointed them at pool. Used wired Ethernet, left WiFi alone. Stable at 203-204 GH/s each.

Epoch

legendary

Activity: 922

Merit: 1003

Quote from: S.Z. on February 17, 2014, 07:08:10 PM

For best work antminer you must use local stratum proxy (in your network, ping must be 1-2ms) then speed goes to 200Gh\s

I know that antminer kan works without local proxy, but speed is lower for 30-40%.

Can anyone confirm this with the newer AntMiners?

S.Z.

newbie

Activity: 16

Merit: 0

For best work antminer you must use local stratum proxy (in your network, ping must be 1-2ms) then speed goes to 200Gh\s

I know that antminer kan works without local proxy, but speed is lower for 30-40%.

kryptoc007

newbie

Activity: 5

Merit: 0

Quote from: eoakland on February 17, 2014, 04:27:40 PM

Quote from: S4VV4S on February 17, 2014, 03:32:37 PM

https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970

6. I see "x" in the ASIC Status

For the ASIC status wise, "x" doesn't necessary means the chip is faulty or failing. If the hashing power seems to be affected, please check your PSU and wiring and reboot and check the status a few times. It should go back to an average 168-180 gh/s range per AntMiner.

when you are getting "x" on the ASIC chip status, please turn off the antminer and double check your PSU cables are connected well and restart. Check the status in about 5 minutes and every 30 minutes for a few hours and see if the "x" are showing up constantly at the same chip or randomly changes or completely disappear.

"x's" do indicate the chip is failing or having issues---to my knowledge. power off the ant, give it a minute, then power back on....check if the Asics still have "x's".....contact either Sushi or Bitmain and ask them as to what they advise.

AND most definitely check your hashing speed with another site, slush is not the best for indicating speed, that site has had all kinds of issues lately.

thanks everyone for the help. After powering off/on I see only 2 Xs, but since I get approx 180 GH/s, I am going to leave it at that.

eoakland

hero member

Activity: 699

Merit: 504

Quote from: kano on February 17, 2014, 05:02:11 PM

Sigh ... to get the actual Paid GH/s on any normal pool you simply:

Convert "Elasped" to seconds - call it S:

2^32 * DiffA / S / 10^9

Pool's random rates, or even the displayed random rates are pretty much meaningless since they are either unstable, incorrect or include work you've done without being paid.

whatever that guy said....it reads super smart =)

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Sigh ... to get the actual Paid GH/s on any normal pool you simply:

Convert "Elasped" to seconds - call it S:

2^32 * DiffA / S / 10^9

Pool's random rates, or even the displayed random rates are pretty much meaningless since they are either unstable, incorrect or include work you've done without being paid.

Topic: Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 96. (Read 368330 times)