[ANN][POOL] HASH-TO-COINS #2 - page 11.

Timo66

newbie

Activity: 28

Merit: 0

Quote from: giantkin on May 09, 2018, 08:04:10 AM

My memory for detail is horrid...

   in the cmd window for the miner, i think it says the diff its using?

   use that as your start spot for all of them.

   then watch results.

ie: if ones crashing, thats easy. change down/up the diff.

if the outpush hash is high on one, mark down what Miner# it is, and what its set at. (next time, you know where to set it, etc) try other numbers for all
the miners. dont have to do it all one day... just keep and eye out and tweak.

gl

(if someone else knows where the number shows, plz say so. ) i am not looking at the window atm.)

g

I will read your comment over and over to understand it well then I will try to do what you said
Many thanks for your help

giantkin

hero member

Activity: 1176

Merit: 501

My memory for detail is horrid...

in the cmd window for the miner, i think it says the diff its using?

use that as your start spot for all of them.

then watch results.

ie: if ones crashing, thats easy. change down/up the diff.

if the outpush hash is high on one, mark down what Miner# it is, and what its set at. (next time, you know where to set it, etc) try other numbers for all
the miners. dont have to do it all one day... just keep and eye out and tweak.

gl

(if someone else knows where the number shows, plz say so. ) i am not looking at the window atm.)

g

Timo66

newbie

Activity: 28

Merit: 0

Quote from: giantkin on May 09, 2018, 07:46:03 AM

Quote from: nostrakhan on May 08, 2018, 08:40:10 AM

Quote from: surferdudemi on May 08, 2018, 08:38:39 AM

Quote from: giantkin on May 07, 2018, 10:44:47 PM

is d= your difficulty?

my miner doesnt start under 32k
(and it likes 100k) both of them actually. tho one liked 130k range

but really i thought the start point was 32k+ for L3++ 's ?
from all that i read anyhow.

I cant check my bat's etc until im at the office.

but i can look at the h2c site and see what i have running.
(1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building. it wont be on much longer either really.

The home page says 8192
"4444 MANUAL DIFF [512..524288] default 8192"

I use d=131072 for my L3+'s

Just like this yes.
Find your 'sweet spot' tho. (each miner has its own i've found)
i have 2, and they are different. (one likes closer to 100k, while the other likes the 132k)

How can I figure out this I have 6 L3+ should I keep trying each ? and how I know if it is good enough for each one? before I read this post I am using stratum+tcp://hash-to-coins.com:3333 Sad

giantkin

hero member

Activity: 1176

Merit: 501

Quote from: nostrakhan on May 08, 2018, 08:40:10 AM

Quote from: surferdudemi on May 08, 2018, 08:38:39 AM

Quote from: giantkin on May 07, 2018, 10:44:47 PM

is d= your difficulty?

my miner doesnt start under 32k
(and it likes 100k) both of them actually. tho one liked 130k range

but really i thought the start point was 32k+ for L3++ 's ?
from all that i read anyhow.

I cant check my bat's etc until im at the office.

but i can look at the h2c site and see what i have running.
(1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building. it wont be on much longer either really.

The home page says 8192
"4444 MANUAL DIFF [512..524288] default 8192"

I use d=131072 for my L3+'s

Just like this yes.
Find your 'sweet spot' tho. (each miner has its own i've found)
i have 2, and they are different. (one likes closer to 100k, while the other likes the 132k)

Timo66

newbie

Activity: 28

Merit: 0

Quote from: giantkin on May 09, 2018, 07:28:34 AM

Quote from: Timo66 on May 09, 2018, 07:19:03 AM

If I use MANUAL DIFF 4444 for my L3+ what is the best difficulty should I use ?
Thanks

130k range (someone just posted their number)

Do you mean I have to write d=130000?

giantkin

hero member

Activity: 1176

Merit: 501

Quote from: chatre7 on May 09, 2018, 06:06:20 AM

why user mining status not show?? Huh

Stats are the last thing shown.
they are just a guide.

(usually after an hour of running they start to show)

the Mining stuff is first.

then something else
then i would look at the coin stats...
then the miner stats display.

(i am guessing from past conversations and usage)

giantkin

hero member

Activity: 1176

Merit: 501

Quote from: surferdudemi on May 08, 2018, 09:48:00 PM

Quote from: giantkin on May 08, 2018, 11:48:40 AM

The L3's dont do it that way.

others might, but not the L3+'s

minimum start (i read) was 24xxx i think...or 32xxx (i read too much, lol)

for my rental setup, i have it suggested to be over 100k for best results lol
g

It works at 16384, too. Just not the "default" 8192. They should change that writeup.

Who should change what? (Antminer? they constantly change their stuff. making things diff.)

or do you mean h2c? shouldnt change that. default is just default. you can set it to whatever you like.

(there are other miners out there, that use lower numbers to start)

giantkin

hero member

Activity: 1176

Merit: 501

Quote from: Timo66 on May 09, 2018, 07:19:03 AM

If I use MANUAL DIFF 4444 for my L3+ what is the best difficulty should I use ?
Thanks

130k range (someone just posted their number)

Timo66

newbie

Activity: 28

Merit: 0

If I use MANUAL DIFF 4444 for my L3+ what is the best difficulty should I use ?
Thanks

chatre7

newbie

Activity: 1

Merit: 0

why user mining status not show?? Huh

surferdudemi

jr. member

Activity: 75

Merit: 1

Does anyone have the definitions of the terms on the home page? I'm most interested in:

Net Hash
BTC/Gh

Think I've got a handle on the others.

surferdudemi

jr. member

Activity: 75

Merit: 1

Quote from: giantkin on May 08, 2018, 11:48:40 AM

The L3's dont do it that way.

others might, but not the L3+'s

minimum start (i read) was 24xxx i think...or 32xxx (i read too much, lol)

for my rental setup, i have it suggested to be over 100k for best results lol
g

It works at 16384, too. Just not the "default" 8192. They should change that writeup.

giantkin

hero member

Activity: 1176

Merit: 501

The L3's dont do it that way.

others might, but not the L3+'s

minimum start (i read) was 24xxx i think...or 32xxx (i read too much, lol)

for my rental setup, i have it suggested to be over 100k for best results lol
g

surferdudemi

jr. member

Activity: 75

Merit: 1

Tried it again with d=32768 and that seems to work. Odd though. It should accept the lower diff as well and just adjust it to the preferred range.

nostrakhan

full member

Activity: 245

Merit: 105

Quote from: surferdudemi on May 08, 2018, 08:38:39 AM

Quote from: giantkin on May 07, 2018, 10:44:47 PM

is d= your difficulty?

my miner doesnt start under 32k
(and it likes 100k) both of them actually. tho one liked 130k range

but really i thought the start point was 32k+ for L3++ 's ?
from all that i read anyhow.

I cant check my bat's etc until im at the office.

but i can look at the h2c site and see what i have running.
(1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building. it wont be on much longer either really.

The home page says 8192
"4444 MANUAL DIFF [512..524288] default 8192"

I use d=131072 for my L3+'s

surferdudemi

jr. member

Activity: 75

Merit: 1

Quote from: giantkin on May 07, 2018, 10:44:47 PM

is d= your difficulty?

my miner doesnt start under 32k
(and it likes 100k) both of them actually. tho one liked 130k range

but really i thought the start point was 32k+ for L3++ 's ?
from all that i read anyhow.

I cant check my bat's etc until im at the office.

but i can look at the h2c site and see what i have running.
(1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building. it wont be on much longer either really.

The home page says 8192
"4444 MANUAL DIFF [512..524288] default 8192"

giantkin

hero member

Activity: 1176

Merit: 501

is d= your difficulty?

my miner doesnt start under 32k
(and it likes 100k) both of them actually. tho one liked 130k range

but really i thought the start point was 32k+ for L3++ 's ?
from all that i read anyhow.

I cant check my bat's etc until im at the office.

but i can look at the h2c site and see what i have running.
(1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building. it wont be on much longer either really.

nostrakhan

full member

Activity: 245

Merit: 105

Quote from: surferdudemi on May 07, 2018, 09:55:38 PM

Trying to point another worker at H2C again. I'm getting nothing. The L3+ shows that it's hashing. It shows accepted (and rejected) counts. It shows the stratum live. How long should I expect to wait for it to show up in the Workers page? I tried waiting 30 minutes. Then I treied creating a new worker and updated the worker name in the L3+. So far, nothing.

Here's the config string in the miner:

stratum+tcp://hash-to-coins.com:4444
[username].AML3d
d=8192

And the status line from the miner:
stratum+tcp://hash-to-coins.com:4444
surferdudemi.AML3d
Alive
8.19K
18
0
1,072
33,388
8,781,824
57,344

I don't see anything obviously wrong.

I think it can take like up to 1 hour to see the miners on the pool.

surferdudemi

jr. member

Activity: 75

Merit: 1

Is there someone from H2C in here? I don't see any posts from H2C anymore and no replies to my emails, ever.

surferdudemi

jr. member

Activity: 75

Merit: 1

Trying to point another worker at H2C again. I'm getting nothing. The L3+ shows that it's hashing. It shows accepted (and rejected) counts. It shows the stratum live. How long should I expect to wait for it to show up in the Workers page? I tried waiting 30 minutes. Then I treied creating a new worker and updated the worker name in the L3+. So far, nothing.

Here's the config string in the miner:

stratum+tcp://hash-to-coins.com:4444
[username].AML3d
d=8192

And the status line from the miner:
stratum+tcp://hash-to-coins.com:4444
surferdudemi.AML3d
Alive
8.19K
18
0
1,072
33,388
8,781,824
57,344

I don't see anything obviously wrong.

Topic: [ANN][POOL] HASH-TO-COINS #2 - page 11. (Read 28096 times)