Topic: [ANN][POOL] ipoMiner - Profitable multipool targeting new coins + merged mining! - page 18. (Read 366235 times)
November 05, 2014, 07:22:56 PM
What is this EDT X11 coin we're mining? Cant find any thread on it. Thanx.
November 02, 2014, 11:18:38 PM
SparkCoin withdrawals have been enabled again following a community takeover of SPARK and resolution of its forked blockchain. I reset pending cashout requests and set everyone's automatic withdrawal threshold to 100,000 SPARK to prevent unintentional automatic withdrawals going to an old/forked wallet. I've also cleared everyone's saved withdrawal address, just to make sure you don't withdraw to an old address by mistake.
Please confirm that wherever you are withdrawing to is on the correct blockchain! Bittrex is still working on it so it is disabled there, and Bter has enabled trading but is not taking deposits for it last I heard.
Please confirm that wherever you are withdrawing to is on the correct blockchain! Bittrex is still working on it so it is disabled there, and Bter has enabled trading but is not taking deposits for it last I heard.
For anyone with some SPARK I've managed to release a Windows version of the fixed wallet now, you can download it from Github at https://github.com/RentaMouse/Spark/releases/tag/v1.2.0
IPOminer can confirm but I believe the pool was on the "correct" fork all along so no miners should have lost out, it seems that some of the exchanges and maybe one pool who joined after launch received a different version of the wallet to the launch release and that contributed to the network fork.
Correct. I've already updated SPARK to RentaMouse's wallet previously, and we were on the main fork so there were no losses from mining. As I posted in the news, withdrawals for SPARK were enabled again.
The site/stratum should be back up now. I've rerouted some server traffic through another provider. There could be some lingering intermittent issues with accessing the site frontend if the attack on the datacenter's network continues through the night, but mining shouldn't be affected anymore.
November 02, 2014, 09:33:39 PM
SparkCoin withdrawals have been enabled again following a community takeover of SPARK and resolution of its forked blockchain. I reset pending cashout requests and set everyone's automatic withdrawal threshold to 100,000 SPARK to prevent unintentional automatic withdrawals going to an old/forked wallet. I've also cleared everyone's saved withdrawal address, just to make sure you don't withdraw to an old address by mistake.
Please confirm that wherever you are withdrawing to is on the correct blockchain! Bittrex is still working on it so it is disabled there, and Bter has enabled trading but is not taking deposits for it last I heard.
Please confirm that wherever you are withdrawing to is on the correct blockchain! Bittrex is still working on it so it is disabled there, and Bter has enabled trading but is not taking deposits for it last I heard.
For anyone with some SPARK I've managed to release a Windows version of the fixed wallet now, you can download it from Github at https://github.com/RentaMouse/Spark/releases/tag/v1.2.0
IPOminer can confirm but I believe the pool was on the "correct" fork all along so no miners should have lost out, it seems that some of the exchanges and maybe one pool who joined after launch received a different version of the wallet to the launch release and that contributed to the network fork.
November 02, 2014, 09:14:51 PM
I can't seem to access the website right now. Is anybody else having the same problem?
Yes, there's a large attack going on presently targeting the core network of our provider. It's not related to us, but we're unfortunately affected.
Good to know that is not an attack against Hashx or Ipominer .
November 02, 2014, 08:40:39 PM
I can't seem to access the website right now. Is anybody else having the same problem?
Yes, there's a large attack going on presently targeting the core network of our provider. It's not related to us, but we're unfortunately affected.
November 02, 2014, 08:21:16 PM
I can't seem to access the website right now. Is anybody else having the same problem?
November 02, 2014, 07:42:24 PM
There's a network issue at one of our providers currently, which is affecting the website and may cause intermittent packet loss to stratum servers as well. I'm in contact with them about it, and will post an update when I have more information or have resolved it.
Just fyi, the problem is definitely affecting the pools (at least the X11 pools) as well the website. Here's what I've been getting for the past hour or so...
[19:35:16] No servers were found that could be used to get work from.
[19:35:16] Please check the details from the list below of the servers you have input
[19:35:16] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[19:35:16] Pool: 0 URL: stratum+tcp://pool.ipominer.com:3335 User: --------------------------
[19:35:16] Pool: 1 URL: stratum+tcp://pool.ipominer.com:3626 User: --------------------------
[19:35:16] Pool: 2 URL: stratum+tcp://pool.ipominer.com:3601 User: --------------------------
[19:35:16] Press any key to exit, or sgminer will try again in 15s.
November 02, 2014, 06:20:10 PM
There's a network issue at one of our providers currently, which is affecting the website and may cause intermittent packet loss to stratum servers as well. I'm in contact with them about it, and will post an update when I have more information or have resolved it.
Thanks for posting this info. Just noticed that there are problems with your site
November 02, 2014, 06:13:15 PM
There's a network issue at one of our providers currently, which is affecting the website and may cause intermittent packet loss to stratum servers as well. I'm in contact with them about it, and will post an update when I have more information or have resolved it.
November 02, 2014, 09:59:37 AM
Hi, are we gonna be mining camorra coin at ipominer? https://bitcointalksearch.org/topic/ann-camorracoin-cam-scrypt-stealth-addresses-encrypted-messaging-827956
Ended up switching pools for seed then noticed it was on ipominer so switched back trying to avoid the fuss
Ended up switching pools for seed then noticed it was on ipominer so switched back trying to avoid the fuss
November 02, 2014, 02:27:29 AM
Could you probably add Mona (scrypt) to the multipool?
I could, but it is very rarely the best coin to mine - it's mined ~1% of the time on Multipool.us, for example. And we have a few coins that are more profitable here, so I suspect it would almost never be mined. Also, every coin that's added to a multiport increases the amount that people need to mine to have enough to get past dust levels for trades..
November 02, 2014, 02:22:58 AM
Could you probably add Mona (scrypt) to the multipool?
October 31, 2014, 12:27:23 PM
SparkCoin withdrawals have been enabled again following a community takeover of SPARK and resolution of its forked blockchain. I reset pending cashout requests and set everyone's automatic withdrawal threshold to 100,000 SPARK to prevent unintentional automatic withdrawals going to an old/forked wallet. I've also cleared everyone's saved withdrawal address, just to make sure you don't withdraw to an old address by mistake.
Please confirm that wherever you are withdrawing to is on the correct blockchain! Bittrex is still working on it so it is disabled there, and Bter has enabled trading but is not taking deposits for it last I heard.
Please confirm that wherever you are withdrawing to is on the correct blockchain! Bittrex is still working on it so it is disabled there, and Bter has enabled trading but is not taking deposits for it last I heard.
October 30, 2014, 06:05:59 AM
Added RubyCoin as an option for the scrypt multiport to mine, and on its own direct port on 3471.
Jaw, it looks like it is on 3471
Didn't read that. Thanks a lot!!
Yes, Rubycoin is available for direct mining on port 3471. I had tweeted about it, but hadn't added it to the homepage yet by the time you had asked. Thanks @Bizquick for helping out.
October 29, 2014, 04:53:47 PM
Added RubyCoin as an option for the scrypt multiport to mine, and on its own direct port on 3471.
Jaw, it looks like it is on 3471
Didn't read that. Thanks a lot!!
October 29, 2014, 04:06:35 PM
Added RubyCoin as an option for the scrypt multiport to mine, and on its own direct port on 3471.
Jaw, it looks like it is on 3471
October 29, 2014, 11:32:27 AM
Does Ruby have a separate port or can I only mine it using the multiport?
October 29, 2014, 08:02:37 AM
can you pls withdraw my spark
acount:
Username: Rigsus
User Id: 8116
thx for help
acount:
Username: Rigsus
User Id: 8116
thx for help
October 29, 2014, 04:46:26 AM
loving the new page 
just tried the neoscrypt port constantly getting waiting for work, work available, waiting for work and so on
any ideas
also how longs the hashx beta price going on for? i really must buy some more
just tried the neoscrypt port constantly getting waiting for work, work available, waiting for work and so on
any ideasalso how longs the hashx beta price going on for? i really must buy some more
I get that same issues, but I still get about 75-80KH/s per 280x. The weird thing I can't figure out is at another neoscrypt pool I don't get the waiting for work every other line, but still am at 75-80KH/s. So basically I just ignore it, as long as your speed is reporting correctly in your miner and at the pool, don't worry about it, neoscrypt is new and buggy.
I can get only 59KH/s per 280x, Gigabyte, cards 55C/1950rpm. No difference AMD driver is 13.12 or 14.9 (last with 13.12 .bin-s).
cgminer.exe --neoscrypt -u [stratum+user+pass] --no-submit-stale -I 13 -g 4 -w 128 --gpu-fan auto --gpu-engine 1075 --gpu-memclock 1500 gpu-powertune 0
Need to do something, but no idea, these are best settings...
CD C:\_mine\cgminer-3.7.7b.neoscrypt
cgminer.exe --neoscrypt -o [stratum,username,password] --no-submit-stale -I 13 -g 1 -w 32 -s 15 -Q 3 -E 60 --gpu-fan auto --gpu-engine 1075 --gpu-memclock 1500 --gpu-memdiff 325,300 --gpu-powertune -10
AMD driver 13.12, w7-64bit = 75kh/s, WU:69/m, temp 62C, 2400rpm (PC case, opened)
AMD driver 14.9, w7-64bit= 76 kH/s, WU:69.5/m, temp 56C, 2100rpm (rig, 13.12 BIN files)
I was close: -I 13, -g 1, -w 32 and then after these "strange" settings like: -s 15 -Q 3 -E 60 --gpu-memdiff 325,300 hashrate was going twice up and I think the result about 75 kh/s is max for these Gigabyte cheap cards and beta neoscrypt cgminer.
Thanks everyone and sorry for posting directly non-related hardware/software issues to IPO forum.
Now fire up your 280x-s and make some FTC-s @ pool.ipominer.com:4401 !
October 28, 2014, 11:03:20 PM
loving the new page
just tried the neoscrypt port constantly getting waiting for work, work available, waiting for work and so on any ideas
also how longs the hashx beta price going on for? i really must buy some more
just tried the neoscrypt port constantly getting waiting for work, work available, waiting for work and so on
any ideasalso how longs the hashx beta price going on for? i really must buy some more
I get that same issues, but I still get about 75-80KH/s per 280x. The weird thing I can't figure out is at another neoscrypt pool I don't get the waiting for work every other line, but still am at 75-80KH/s. So basically I just ignore it, as long as your speed is reporting correctly in your miner and at the pool, don't worry about it, neoscrypt is new and buggy.
I can get only 59KH/s per 280x, Gigabyte, cards 55C/1950rpm. No difference AMD driver is 13.12 or 14.9 (last with 13.12 .bin-s).
cgminer.exe --neoscrypt -u [stratum+user+pass] --no-submit-stale -I 13 -g 4 -w 128 --gpu-fan auto --gpu-engine 1075 --gpu-memclock 1500 gpu-powertune 0
Need to do something, but no idea, these are best settings...
Jump to: