[ANN][POOL] ipoMiner - Profitable multipool targeting new coins + merged mining! - page 89.

RentaMouse

sr. member

Activity: 252

Merit: 250

Quote from: cyneverdie on April 18, 2014, 01:28:27 PM

Hi!
@ipominer specially.

I am a noob...please do explain to me why profitability has plummeted and been stuck at .00767 Btc/Mh/Day ?
Is it because difficulty of WC has risen?
But the exchange rate has also risen QUITE A BIT @ 0.00001616 !?

SO why has profitability plummeted!!??

Please someone enlighten me!

Thanks a TON!

@IPOminer can tell you exactly how the profitability is calculated, but if you check out your stats for WC (click the coin name in the profitability table, then change it to "your stats") you can see your avg hash rate and estimated coins per day. From that and the exchange rate for the coin you can work out your BTC/MH/day rate, which is basically how the site does it. The two variables are coins per day and exchange rate, and the main factor determining coins per day (your hash rate doesnt matter because its BTC per MH) is the difficulty. The "your stats" page for the coin also helpfully shows the difficulty graph, you'll see for WC its been increasing steadily as more and more people have been mining because the profitability is so good.

PondSea

legendary

Activity: 1428

Merit: 1000

Anyone know how long WC will take to confirm?

PDcologne

full member

Activity: 154

Merit: 100

Quote from: bmoconno on April 18, 2014, 02:28:49 PM

Quote from: TheFuneral on April 18, 2014, 12:39:12 PM

Quote from: ipominer on April 18, 2014, 11:29:16 AM

The site uses shares submitted, which isn't really a reflection of your "hashrate" reported by your miner - it is what your miner calls work units. On my own Gridseeds, I've noticed that if I use higher difficulty I see a big variance in my shares submitted per 10 minutes. I use 128 for my 6MH and 10MH rigs of Gridseeds. For less than 16 of the 5-chip Gridseeds, I would use 64 for your difficulty.

I have 20 GS grids each as one worker with your pool. Is there a place I can see shares submitted then instead of hash rate if it's not the most useful of number? If I increase my difficulty you're saying I'll see a hashrate closer reflecting what I see locally, but it sounds like that doesn't really matter, more of an appearance issue?

I've noticed that if I have my seeds clocked higher than 850, they look like they are running awesome on my end (no HW or anything), but the rate reported by the pool is always 2-3 Mh/s lower than what I'm seeing.

My assumption is that they actually aren't actually running that great, even at 855 I see this problem. So I put them back to 850 and now what I'm seeing on my end, and what I'm seeing at the pool are just about the same (minor variance but nothing worth sweating over).

+1 i leave mine at 850 - very little variance, and completely stable at that frequency....

bmoconno

sr. member

Activity: 280

Merit: 261

New In Town...

Quote from: TheFuneral on April 18, 2014, 12:39:12 PM

Quote from: ipominer on April 18, 2014, 11:29:16 AM

The site uses shares submitted, which isn't really a reflection of your "hashrate" reported by your miner - it is what your miner calls work units. On my own Gridseeds, I've noticed that if I use higher difficulty I see a big variance in my shares submitted per 10 minutes. I use 128 for my 6MH and 10MH rigs of Gridseeds. For less than 16 of the 5-chip Gridseeds, I would use 64 for your difficulty.

I have 20 GS grids each as one worker with your pool. Is there a place I can see shares submitted then instead of hash rate if it's not the most useful of number? If I increase my difficulty you're saying I'll see a hashrate closer reflecting what I see locally, but it sounds like that doesn't really matter, more of an appearance issue?

I've noticed that if I have my seeds clocked higher than 850, they look like they are running awesome on my end (no HW or anything), but the rate reported by the pool is always 2-3 Mh/s lower than what I'm seeing.

My assumption is that they actually aren't actually running that great, even at 855 I see this problem. So I put them back to 850 and now what I'm seeing on my end, and what I'm seeing at the pool are just about the same (minor variance but nothing worth sweating over).

cyneverdie

newbie

Activity: 7

Merit: 0

Hi!
@ipominer specially.

I am a noob...please do explain to me why profitability has plummeted and been stuck at .00767 Btc/Mh/Day ?
Is it because difficulty of WC has risen?
But the exchange rate has also risen QUITE A BIT @ 0.00001616 !?

SO why has profitability plummeted!!??

Please someone enlighten me!

Thanks a TON!

TheFuneral

sr. member

Activity: 356

Merit: 250

Quote from: ipominer on April 18, 2014, 11:29:16 AM

The site uses shares submitted, which isn't really a reflection of your "hashrate" reported by your miner - it is what your miner calls work units. On my own Gridseeds, I've noticed that if I use higher difficulty I see a big variance in my shares submitted per 10 minutes. I use 128 for my 6MH and 10MH rigs of Gridseeds. For less than 16 of the 5-chip Gridseeds, I would use 64 for your difficulty.

I have 20 GS grids each as one worker with your pool. Is there a place I can see shares submitted then instead of hash rate if it's not the most useful of number? If I increase my difficulty you're saying I'll see a hashrate closer reflecting what I see locally, but it sounds like that doesn't really matter, more of an appearance issue?

shai_

hero member

Activity: 728

Merit: 500

is something wrong with the pool?
first of all luck looks bad ? not sure about that
and also i notice that one of my pcs trying to solve previous block and not updating from stratum ? it does update but with a big lag

stumblios

newbie

Activity: 14

Merit: 0

Quote from: ipominer on April 18, 2014, 11:29:16 AM

The site uses shares submitted, which isn't really a reflection of your "hashrate" reported by your miner - it is what your miner calls work units. On my own Gridseeds, I've noticed that if I use higher difficulty I see a big variance in my shares submitted per 10 minutes. I use 128 for my 6MH and 10MH rigs of Gridseeds. For less than 16 of the 5-chip Gridseeds, I would use 64 for your difficulty.

Thanks for this info. I think it might be a good idea to update the difficulty section of the help page on the website, as of right now it suggests significantly higher levels of difficulty than what you gave here.

Frosty45

newbie

Activity: 44

Merit: 0

Have we really been stuck on the last WC block for an hour?

ipominer

legendary

Activity: 1050

Merit: 1000

Mine the hottest new coins at ipoMiner.com

The site uses shares submitted, which isn't really a reflection of your "hashrate" reported by your miner - it is what your miner calls work units. On my own Gridseeds, I've noticed that if I use higher difficulty I see a big variance in my shares submitted per 10 minutes. I use 128 for my 6MH and 10MH rigs of Gridseeds. For less than 16 of the 5-chip Gridseeds, I would use 64 for your difficulty.

Wings1987

sr. member

Activity: 418

Merit: 250

Quote from: TheFuneral on April 18, 2014, 09:36:28 AM

Any idea why my ASICs report 7MH/s locally, but on the 10 minute hashrate of the site I see 4.5MHs-5.5MHs? Should I not be worried and go by what my local mining software is reporting?

Thanks again for running this pool it's awesome!

Curious about this also. I have 2 Gridseed rigs and 3 GPU Rigs. The 3 GPU and 1 gridseed all report properly. My second gridseed is 8MH but reports in the same range. 4.5-5.5. Switching it away from ipominer and I get the proper hashrate. I have also fooled with the difficulty and that doesn't seem to make a difference. Any thoughts?

Thank for the great pool!

TheFuneral

sr. member

Activity: 356

Merit: 250

Any idea why my ASICs report 7MH/s locally, but on the 10 minute hashrate of the site I see 4.5MHs-5.5MHs? Should I not be worried and go by what my local mining software is reporting?

Thanks again for running this pool it's awesome!

PDcologne

full member

Activity: 154

Merit: 100

Quote from: PDcologne on April 18, 2014, 08:54:26 AM

Quote from: Reese212 on April 18, 2014, 08:38:08 AM

you've seen what's Happening on mintpal?

WC - 1800sat....

yes but was at 5k before the dump - i did not have time to move my WC.... oh well 10k before the weekend is out

credit to ipominer yet again....

PDcologne

full member

Activity: 154

Merit: 100

Quote from: Reese212 on April 18, 2014, 08:38:08 AM

you've seen what's Happening on mintpal?

WC - 1800sat....

yes but was at 5k before the dump - i did not have time to move my WC.... oh well 10k before the weekend is out

Reese212

full member

Activity: 210

Merit: 100

you've seen what's Happening on mintpal?

WC - 1800sat....

bruiser

member

Activity: 68

Merit: 13

AC pool front-end having issues?

edit: appears to be fine now. Wasn't sure because I was seeing ~50m block on AC

Acrospore

newbie

Activity: 10

Merit: 0

Quote from: infofront on April 17, 2014, 09:12:51 PM

What price are you guys holding out for on WC?

I came to the conclusion of holding for a bit of a bump, then selling. so mine are sold except for daily mining. I figure I can always day trade it later if it is a successful coin.

nightengale

hero member

Activity: 574

Merit: 500

Quote from: infofront on April 17, 2014, 09:12:51 PM

What price are you guys holding out for on WC?

I may regret it, but I've just been selling on the way up. We've been doing on average more than 0.01 BTC per 1 MH/s, and that being about double what you might make on Clevermining, etc., I've just been cashing out. I could have done better had I held on for a couple of days, but with guaranteed income that good, for me it was not worth the risk of holding.

infofront

legendary

Activity: 2646

Merit: 2842

Shitcoin Minimalist

What price are you guys holding out for on WC?

ipominer

legendary

Activity: 1050

Merit: 1000

Mine the hottest new coins at ipoMiner.com

@Pricoin19w Not at the moment.

Topic: [ANN][POOL] ipoMiner - Profitable multipool targeting new coins + merged mining! - page 89. (Read 366235 times)