Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 183. (Read 487800 times)

https://aurora-qubit.miningpoolhub.com/  - main menu error
need https://auroracoin-qubit.miningpoolhub.com/

Musicoin Mining Pool Hub

https://musicoin.miningpoolhub.com

Fixed forked blockchain sync problem.
Block info, pool payouts are working as before.

Your hashpower is temporarily routed to ethereum because musicoin blockchain file corrupted with their release.
I'm rebuilding musicoin blockchain to run musicoin pool again.


Here's more info I wrote on musicoin bitcointalk.
https://bitcointalksearch.org/topic/m.22832700

Musicoin Mining Pool Hub

Musicoin hardfork did not work well due to binary release error.
Musicoin payouts, block info updates are temporarily disabled and hashpower routed to Ethereum instead. Will recover within 30 minutes.


Here's more detail what happened.
https://bitcointalksearch.org/topic/m.22832700

I'm not sure at this moment.




Djm34 build sends normal shares and previous block's shares.
Those previous block's shares are totally useless and treated as invalid. So it's intended action actually.

I believe that invalid share percent goes up and down radically. It should be okay most times, isn't it?

What happened to the MUSIC coin pool in the last few hours?  I have not generated any new coins even though everything on my side appears normal and shares are being found.  The pool hash rate on MPH shows zero and my hash rate shows 1831 when normally it sound be around 100 and my unconfirmed total is not being confirmed.  Something is very wrong with the pool.

@miningpoolhub I started some hours ago using your zcoin pool, checked just a minute and:

Est. Shares    142,393 (done: 69.81%)
Your Valid    87.7301
Your Invalid    28.8445 (24.74%)

Any tip for improve this insane amount of invalid shares?
Im using last djm's ccminer like its recommended

Thanks in advise

Will you support BitCoin Gold? Will we be able to mine it here?

There's no way to set static diff for zcoin. "d=" option is for starting difficulty of miner connection. It's not that useful in most cases.
Can you tell me your id? I'll check your invalid share.




Coins sent to exchange sites will get back when certain conditions are met.
You can see your coin's distributtion at Balances page.
https://miningpoolhub.com/?page=account&action=balances


It usually needs about 4~12 hours. Sometimes more if you exchange to unpopular coins.

Hi.

i have Auto exchange set to Bitcoin Cash, and i am mining with Auto switching algo. I see transactions on my balance page, coins go from "Credited" to "Credited for Auto Exchange" to "On exchange"..... them i do not know where they are. after 3 hours i did check the Bitcoin Cash wallet and only have 0 balance. Where are my coins?

I cant seem to set diff for zcoin, tried adding "-p d=10" on batch file but it did not work. Any way to set fixed diff?  Im also having invalid shares about 5-15% invalid shares most of the time on zcoin dashboard but no invalid shares on miner. Like ex Im getting 5213/5213 shares, no invalid/rejected shares on miner side but on mph zcoin dashboard im getting about 10% invalid shares  Im using the latest djm34 ccminer. Tested both releases. Anyone else experienced this?

Thanks! Appreciate for your feedback




That transaction is transferring from your "normal credit wallet" to "exchange wallet"
8699926 transaction means "debit from your credit wallet" and right next transaction 8699927 means "credit to your auto exchange wallet".

You will see same 0.06221663 amounts moved internally but did not withdrawn to your wallet.
Your coins are transferred to auto exchange wallet and sent to exchange site. At transaction id 8729430, you can see Debit_AE (Debit for auto exchange)

Hi,

I'm using autoexchange in MiningPoolHub from Monero to Bitcoin.
Could you check tx id 8699926 with amount 0.06221663 XMR? It should be on exchange several hours ago, but it did not appear.

regards,
agismaniax

autoexchange @phub is the feature that makes phub different to other pools...really awesome service..thanks for that
im small miner for example...if i would mine somewhere else, i had to wait until i have enough to withdraw and i had to pay shitload of fees and i had all the work with that transfering and exchanging shit...

on phub just turn on my miner and work gets done

No you don't need to configure something if you don't use 12xxx ports and Hub Workers.
e.g.) Multi algo switch things.






Just type d=xxx

You don't need to consider worker password from website at all. Just change password from your mining rig and connect.





How's your Graphs page? You see less hashrate too?
I haven't heard this kind of issue until now. What's your actual hashrate from console?






Try latest djm34's ccminer. tpruvot ccminer tend to omit some shares AFAIK.
Visit https://zcoin.miningpoolhub.com and you will see miner link.






Let's say you exchange coins from Monero to Ethreum.

Your coin will move like this order.
Monero -> Send to exchange site -> Exchange to BTC -> Buy Ethereum with exchanged BTC -> Withdraw to pool.


Let's look into it in detail.

1. Monero ->
2. Send to exchange site (free. Pool pays network fee) ->
3. Exchange to BTC (exchange fee from exchange site. Charged in percentage) ->
4. Buy Ethereum with exchanged BTC (exchange fee from exchange site. Charged in percentage) ->
5. Withdraw to pool (withdrawal fee from exchange site. 1/n to all participants)

Also additional 0.2% fee from pool is charged. This is mostly equal or similar to network fee that is written at number 2.


Auto exchange is not for traders but it's for convenient feature for miners. This auto exchange doesn't consider about buy/sell strategy stuffs, but only buy/sell at market price immediately to reduce to risk of price changes.
There's no way to skip or not pay exchange fee if you exchange manually. Pool has to pay them too.

Here's some advantages that pool would be better sometimes because of aggregated amount volume.

(1) Exchange sites ask minimum trading volume to buy or sell, so if you mined only small amount of coins then you will not even able to exchange manually.

(2) It becomes harder problem when it comes to ETH type coins too. Big exchange sites like Poloniex and Bittrex confirm your deposit only when it exceeds 0.1 or 1 ETH.
This is not easy to overcome for small miners. This is big advantage too.

(3) Withdrawal fee is not charged by rate, but charged per withdrawal request. As pool withdraw bigger amount than one personal miner, you pay less. 1/n of fee to all amounts.

(4) Some coins like Monero has high transaction network fee itself. (0.015 XMR is needed to withdraw from pool)
As pool sends big amounts in one transaction for auto exchange, pool only charge them 0.2% fee. Compare 0.2% fee and 0.015 XMR. You pay less if you withdraw less than 7.5 XMR.


Auto exchange is one of the most beloved feature at miningpoolhub.
If it was making things worse or unfair, people would have not use it.

It's quite old problem but there were no solutions until few days ago.
It was caused by ccminer tpruvot release's internal bug dealing with share submission. Try djm34's latest release. It will solve your problem.

Link is posted at zcoin pool page.
https://zcoin.miningpoolhub.com


Also keep in mind that pool doesn't show accurate numbers. Pool shows accurate numbers estimating according to inserted shares.
Check Graphs page. It's accurate than dashboard or Workers page because it samples longer period of time.






stratum+tcp://hub.miningpoolhub.com:17007

Use id not email address.





Sorry for late. I've been doing background jobs daily.
Zcoin, Monero, OTP feature, performance tuning things.




Nope. Just wait and you will get coins.





If you paid for even rejected shares, then nicehash should refund your coin.








Use one more account?
Actually I once tried to make some auto exchange rate amount you asked. But dropped this idea because it would make things more complicate for users. I like simpler UI and intuitive logic.
I feel like miningpoolhub is complex already for beginners. I'm afraid to add more options and switches.







Yeah. I'm in South Korea. How did you know that? I'm curious.
Withdraw automatically and pray for me. 




Sorry for inconvenience. Several pools were down due to datacenter problem. Also zcoin wallet had some internal bug that causing crash again and again.

I believe it's all solved and working great.




Also switches only when current mining coin's block is found.
I'll add HUSH, ZEN, KMD. Really.






No. Pool was designed for mining only. There's no transfer feature between accounts.





Maybe your miner is switching coins?



Thank you for suggestion. I'll consider it.

@mjmeans With all the respect you deserve.

I think in the beginning all of us think about fees, but hey everything in life have a cost, just take all in consideration and keep on mining.
We pay (in mining world) for the pool, for transfers, for developer of mining software, for convert to fiat, electricity, ventilation, extra AC circuits, and the list goes longer, hey we pay even for receive transfers (Localbitcoins case).
In the end is just something we must pay, and never was part of our income, because if we dont pay the cost, we dont have the full thing, so without costs we have nothing  .

In the time i owned just some gpus (and before that, just one fx 6300 cpu) i used to think like that, (i need to save every penny), but after a while i realize that even my time cost (oh boy, i invest so many time asking me those questions). An even now i can tell you, exprimenting so many variable paths to go from my rig to a dollar in my account, cost you even more, because crypto is a very volatile world.

I will give you just example about what was applied in the past, and i think maybe is worth for you give it a try. If you want low fees, autoexchange to a little coin, in this example "EXP" (You pay only 0.0005 EXP, like 0.0008731 USD ), then you can cashout to Polo, sale in Polo for BTC and pay only 10,000 sat to get in gdax (Like 0.4329 USD).

But then you get the cons (Many time worst than the ones you can find using autoexchange), like exp 90 confirmations or 132 minutes, the coin change the price, you convert in a crash, etc, etc. But most of all "How many of your time you invest in doing that"

Just something to think about.

My best Wishes to all!

Well, I disagree. When I mine ETH on nanopool, I see the pool fee and the exchange fee that transfers to my wallet. Everything is documented and traceable. And I exchange directly to cash on GDAX not to BTC first. And that exchange has no exchange fee on a limit sell. I'm not going to pay even a fraction of a percent if I don't have to. The cash out fees on MPH are 0.0003 BTC for BTC (~$1.30) or 0.001 ETH for ETH (~$0.30). So each daily cash out of BTC costs more as long as the pool is not causing me to lose more than 0.003 ETH in any auto-exchange to ETH.

Then it's a none issue. Send it to the exchange yourself or let the pool do it. You're most likely using the same exchanges.

I'm sure most people convert everything to bitcoin as it's the easiest to convert to cash. You can literally send it to a Bitcoin card, withdraw from one cash machine, deposit into your current account and is all available within an hour then go live the dream and stop worrying.

It may be a none issue for those who are investing. That's not me. I'm not investing. I'm not holding on to any crypto currency, I'm cashing out at first opportunity. When cash flowing like this the direct immediate costs are most important because I'm not choosing when to sell. Whenever payout happens to my wallet within a day at most I've already sold for cash. Cash is then available to use to when I find a good deal on a GPU(s). As more GPU's are added I can expand faster and faster. There will be a time when I decide to stop expanding and only at that point will the issue be relatively low importance.