[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 262.

blimeyfool

newbie

Activity: 10

Merit: 0

Quote from: blimeyfool on March 30, 2017, 07:46:40 PM

Hi -

Sorry if this is an obvious question, but I've looked everywhere and can't find it.

I've been mining ETH for the last couple of days and have been very happy with the service. Love the auto exchange feature. I just changed my config to point to the ethash switch pool (us-east.miningpoolhub.com:17020) and added SIA (using Claymore).

SIA is mining just fine and I can see the worker and hash rate on that page. ETH is connected to the pool, showing shares and hash rate in the miner. However, I don't see a worker or any hash rate on the ETC pool page (ethash is mining ETC now). I believe this is because it is going to a hub pool and not the ETC pool. However, it would be nice if there was somewhere to see that. Is there a dashboard/worker page somewhere for the switching pool?

Thanks and looking forward to continuing to mine here (next step will be setting up multi-algo!)

Bump - sorry to be a pest, but is there anywhere to monitor hub worker status, i.e. hash rate, coin being mined, etc.? Everything seems to be working since I can see different coins on the Balances page go from having unconfirmed to confirmed to on exchange and then into my coin of choice, but it would be nice to have a more real time view that things are working.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: Kevin77 on March 31, 2017, 04:24:11 PM

How does the autopool decides which coin is the most profitable and mine?
According to that programming can’t we just mine the most profitable ourselves as well? I didn’t know it could be calculated that easily. Hopefully there will be more pools keep doing this, it is the most profit optimized version. Good Job.

Currently server calculates raw profitability values for each coin.
https://miningpoolhub.com/?page=home&normalize=none
You can see that earning per GH/Day.
It is just raw profitability assuming all algo at 1GH of mining power which is not that suitable for real GPU hardwares.

Pool normalizes them to average AMD/NVIDIA performance.
https://miningpoolhub.com/?page=home&normalize=amd
https://miningpoolhub.com/?page=home&normalize=nvidia
So that pool can compare profitability overall different algo types

If you think your GPU is far from AMD/NVIDIA average performance, you'd better try multipoolminer.
That uses raw profitability numbers from miningpoolhub but adapts normalization process to each hardware's real performance.
This way, mining coin is selected from client.

Or... you can just switch coin from website with single click also. This can be achieved by hub workers page and 12xxx ports.
https://miningpoolhub.com/?page=gettingstarted

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: PovertyByte on March 30, 2017, 10:38:20 PM

Quote from: DrX on March 30, 2017, 04:17:16 AM

Sorry for asking again,

Are you planing to add Decred anytime soon?

Second this. It's been requested for some time now.

There is definitely interest for DCR to be added to MPH.

Yeah. I'm gonna add DCR.
Still doing hard work at server maintenance and backend optimization.

Sorry for late.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: blimeyfool on March 30, 2017, 07:46:40 PM

Hi -

Sorry if this is an obvious question, but I've looked everywhere and can't find it.

I've been mining ETH for the last couple of days and have been very happy with the service. Love the auto exchange feature. I just changed my config to point to the ethash switch pool (us-east.miningpoolhub.com:17020) and added SIA (using Claymore).

SIA is mining just fine and I can see the worker and hash rate on that page. ETH is connected to the pool, showing shares and hash rate in the miner. However, I don't see a worker or any hash rate on the ETC pool page (ethash is mining ETC now). I believe this is because it is going to a hub pool and not the ETC pool. However, it would be nice if there was somewhere to see that. Is there a dashboard/worker page somewhere for the switching pool?

Thanks and looking forward to continuing to mine here (next step will be setting up multi-algo!)

Well there's no hub pool.
Hub just redirects internally to each coin pool. So you should see workers and hashrate at ETC target pool if it's mining ETC.

Maybe website caching caused that.
There may be about 5 ~ 12 minutes delay showing hashrate because of backend server share collecting and optimization.
maybe adding worker manually will show hashrate faster. It also has some caching inside.

Let me know if there's still problem there.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: pornluver on March 30, 2017, 01:19:47 PM

Let me try to understand.

What is a share?

Some says that not every hash count as a share. You have to multiply that by a certain number first.

So only hash that serve some difficulty would work.

Say difficulty is 1000. People submit about 500 shares. Then suddenly difficulty drops to 1. So https://miningpoolhub.com/?page=home&normalize=none will report sky high value right?

Obviously it's time to send massive hashing power.

Now, say people send 1 share and the block is solved. He got 1 BTC (obviously we don't mine BTC, but this is just for simplicity sake).

How much money he got?

Notice it's not just luck. The first 500 shares are mining when difficulty is high. The guy that send massive hash when difficulty drops is the one getting you block. How would you distribute the fund?

Every share has its own difficulty value.

Let's say..
Miner A inserts a share of 0.5 difficulty value.
Miner B inserts a share of 0.2 difficulty value.
Miner A again inserts a share of 0.7 difficulty value.

Then miner A's total sum of share is 1.2, and miner B's total sum of share is 0.2.
Block reward is distributed to
A : 1.2 / (1.2 + 0.2)
B : 0.2 / (1.2 + 0.2)
I think you'd get the point from this formula.

The difficulty value is set from pool side. Pool sends each miner appropriate difficulty value to solve in certain time period.
Say, pool sets 0.3 difficulty level for miner A
If miner A finds share difficulty like 0.7 which is higher than 0.3, then he sends the share solution.
Then it is counted as 0.3 from pool side.
If miner inserts share frequently than average, then pool raises difficulty level for miner A.
This repeats infinitely, so every miner gets appropriate difficulty level. Shares are inserted, and counted, distributed.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: pornluver on March 30, 2017, 10:00:11 AM

So you use last few blocks? How few? Last 10? Last 20?

I am not aiming for 2% profit difference. I am aiming for 30% profit difference. Sometimes price in nicehash differ from price in miningpoolhub by big margin. I uses bot. And after exchange and stuff, still lost money.

I will try again and tell you the result.

last 3~7 blocks.

What algo/coin are you mining?

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: secondcomingwp on March 30, 2017, 08:37:45 AM

Quote from: not.you on March 30, 2017, 07:42:33 AM

Quote from: miningpoolhub on March 30, 2017, 02:57:41 AM

Quote from: secondcomingwp on March 29, 2017, 07:43:17 AM

Is there an issue with the monero pool at the moment, I have several workers which keep getting socket closed errors and they are showing as inactive on the workers page (even though they do seem to be reconnecting and submitting eventually).

There were some connectivity issues for some miners due to overloaded users at monero pool.
Sorry about it. It's all resolved now.

I believe this kind of issue will not happen anymore.

I am still having issues. About half of my miners are showing inactive on the pool side. Dashboard hashrate is also showing about half of what it should be. The miners themselves seem to be connected and working however.

Same here

Sorry I adjusted minimum difficulty because of massive load of some miners.
I lowered it again. I hope it's resolved now.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: not.you on March 30, 2017, 07:42:33 AM

Quote from: miningpoolhub on March 30, 2017, 02:57:41 AM

Quote from: secondcomingwp on March 29, 2017, 07:43:17 AM

Is there an issue with the monero pool at the moment, I have several workers which keep getting socket closed errors and they are showing as inactive on the workers page (even though they do seem to be reconnecting and submitting eventually).

There were some connectivity issues for some miners due to overloaded users at monero pool.
Sorry about it. It's all resolved now.

I believe this kind of issue will not happen anymore.

I am still having issues. About half of my miners are showing inactive on the pool side. Dashboard hashrate is also showing about half of what it should be. The miners themselves seem to be connected and working however.

Sorry I adjusted minimum difficulty because of massive load of some miners.
I lowered it again. I hope it's resolved now.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: jkminkov on March 30, 2017, 11:27:44 AM

I have problem with monero, worker.2 works fine, for worker.1 pool gives me difficulty 200 000 and if I start worker.3, for some reason all workers start to lose connection

Sorry I adjusted minimum difficulty because of massive load of some miners.
I lowered it again. I hope it's resolved now.

carlo_0000

legendary

Activity: 1281

Merit: 1003

no xmr is not profitable anymore for weeks already (amd)
it s eth and zec

i just have 1 ring on xmr because it crash on zec and can't do eth

rickadone

legendary

Activity: 1176

Merit: 1024

Quote from: not.you on April 02, 2017, 10:21:05 PM

Hooray! XMR pool looks like everything is working again. Unconfirmed went through, miners all showing connected, vardiff working.

What happened with the price though, is it still the most profitable for you guys?

I have been trying to do the math manually instead of checking multipools and I wanted to come here and ask you guys if it is the most profitable altcoin to mine or not. Since the price surge it maybe the most profitable one but not sure for the long term.

asc_one

newbie

Activity: 22

Merit: 0

I've got a little problem with the autoexchange. There are about 0.092 Ethereum stuck at "On Exchange" since weeks.
User is : asc_one

vlcmstne

newbie

Activity: 19

Merit: 0

What's the Status on this?

We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.

Payouts disabled, you will not receive any coins to your offline wallet for the time being
Blockupdate disabled, blocks and transactions confirmations are delayed
Findblocks disabled, new blocks will currently not show up in the frontend

not.you

legendary

Activity: 1726

Merit: 1018

Hooray! XMR pool looks like everything is working again. Unconfirmed went through, miners all showing connected, vardiff working.

2zacminer

newbie

Activity: 3

Merit: 0

Good Night,Once again the miningpoolhub with problems !!! This is difficult to work with you, since Saturday that the balance does not update the balance of my wallet, another problem with the workers that is not activating,
I and other friends occupy all the top positions of the monero pool rank and we are very dissatisfied, we need different support because we are the ones that we give the most money to you in monero, so how do we do? Are you going to help us? I await an urgent decision until the end of the day.I ask for a quick solution or whe will take all machines out of the pool. Users: 2zacminer, mineirinho, manotrol

Regards Rafael

Smokeyw

full member

Activity: 228

Merit: 100

Quote from: crazyearner on April 02, 2017, 02:21:04 PM

Please support musicoin algo ether

yes plz and Ubiq coin both are ethash

crazyearner

legendary

Activity: 1820

Merit: 1001

Please support musicoin algo ether

manotroll

sr. member

Activity: 305

Merit: 250

Is there a problem with xmr acknowledgments?

secondcomingwp

newbie

Activity: 14

Merit: 0

Quote from: secondcomingwp on March 30, 2017, 11:58:40 AM

Quote from: not.you on March 30, 2017, 11:24:28 AM

Quote from: secondcomingwp on March 30, 2017, 08:37:45 AM

Quote from: not.you on March 30, 2017, 07:42:33 AM

Quote from: miningpoolhub on March 30, 2017, 02:57:41 AM

Quote from: secondcomingwp on March 29, 2017, 07:43:17 AM

Is there an issue with the monero pool at the moment, I have several workers which keep getting socket closed errors and they are showing as inactive on the workers page (even though they do seem to be reconnecting and submitting eventually).

There were some connectivity issues for some miners due to overloaded users at monero pool.
Sorry about it. It's all resolved now.

I believe this kind of issue will not happen anymore.

I am still having issues. About half of my miners are showing inactive on the pool side. Dashboard hashrate is also showing about half of what it should be. The miners themselves seem to be connected and working however.

Same here

I believe the problem is that the difficulty is very high for all workers and vardiff does not seem to be enabled. So when a worker does not find a share for a long time it shows as not active. All of my workers show a difficulty of 200,000 in the web interface.

Mine keep dropping off at random and the ones that do connect show at 200,000 difficulty as you say

https://i.imgur.com/tduKjb2.png

still broken here, I've even stopped all miners, removed all the workers and then let them re-add again.

Cryptofi$h

sr. member

Activity: 331

Merit: 252

Any chance we can get pinkcoin added to a pool somewhere? Just launched with a new algorithm...

https://t.co/8gkQ7n7Er0

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 262. (Read 487803 times)