Author

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 257. (Read 487870 times)

newbie
Activity: 8
Merit: 0
I did this more or less as an experiment Smiley

The idea of preferring slow speeds is that you contribute to with a small % (say 1%) to each block
worded by your mining pool. If your MiningPool wins that block, you get your 1% of the reward associated
with that block. Otherwise my computational power is lost.

So, if your mining Pool wins say 10blocks/day, after 1 day of work statistically you get (10*Reward_of_each_block)* (1%).



The problem, instead, of renting a lot of computational power for a short time is that I might
contribute 50% just for a couple of blocks, and if those blocks don't win, I'm screwed.
(If the win, instead, I can get much more reward).


Is what I wrote above correct? Sorry I'm a total noob with mining! Smiley


Another specific question: what are the 'Round Shares' ? Are they collected over multiple blocks, or reset to zero after each block (won or lost)?
sr. member
Activity: 476
Merit: 250
Hello everybody,

I discovered the service https://www.nicehash.com/

They rent computational power. I would like to use it with miningpoolhub.com.

I've tried and started it and invested 0.05BTC on mining Monero, without putting any limit (in GH/sec)

I didn't see the point of putting a limit, in fact the quicker the better?!? But I guess I missed something...

Indeed miningpoolhub.com only gave me 1.27 XMR in return, while 0.05BTC is worth more than twice than that.

What did I do wrong? What's the problem?
Any suggestion about using  https://www.nicehash.com/ in combination with miningpoolhub.com?

Thanks a lot in advance for any answer! Smiley

Mining is estimations and luck. You should rent for hours/days at slow speeds. You are unlikely to gain anything though; if you want to convert BTC to XMR then I recommend using an exchange.
newbie
Activity: 8
Merit: 0
Hello everybody,

I discovered the service https://www.nicehash.com/

They rent computational power. I would like to use it with miningpoolhub.com.

I've tried and started it and invested 0.05BTC on mining Monero, without putting any limit (in GH/sec)

I didn't see the point of putting a limit, in fact the quicker the better?!? But I guess I missed something...

Indeed miningpoolhub.com only gave me 1.27 XMR in return, while 0.05BTC is worth more than twice than that.

What did I do wrong? What's the problem?
Any suggestion about using  https://www.nicehash.com/ in combination with miningpoolhub.com?

Thanks a lot in advance for any answer! Smiley
sr. member
Activity: 476
Merit: 250
I've been mining with multipoolminer for quite a while.

I wonder if there is a way to check hash at miningpoolhub? For example, say I am connected. Can I look at miningpoolhub and see ah, this rig is producing this much that rig is producing that much?

How much money we lost on "autoexchange"? Just curious.

I think MiningPoolHub is trying to add features like that but maintenance and new coins take a lot of time.

You can see the live hashrate of each worker if you go into each coin but that's it; it's all quite disconnected.
hero member
Activity: 960
Merit: 514
I've been mining with multipoolminer for quite a while.

I wonder if there is a way to check hash at miningpoolhub? For example, say I am connected. Can I look at miningpoolhub and see ah, this rig is producing this much that rig is producing that much?

How much money we lost on "autoexchange"? Just curious.
hero member
Activity: 960
Merit: 514
I saw this table at miningpoolhub
Code:
Equihash Zcash 17023 6,362.14238 703.63K 2
Cryptonight Monero 17024 1,732.88262 2.45M 1
Yescrypt Myriadcoin-Yescrypt 17021 78.42032 133.00K 2
NeoScrypt Feathercoin 17012 1.76224 309.16M 3
Lyra2z Zcoin 17025 1.54223 13.59G 1
Ethash Ethereum 17020 0.06424 1.67T 3
Lyra2RE2 Vertcoin 17018 0.05724 3.86G 1
Scrypt Gamecredits 17001 0.05640 567.43M 4
Qubit Digibyte-Qubit 17014 0.05438 6.40G 2
Groestl Groestlcoin 17004 0.04902 380.95M 1
Myriad-Groestl Myriadcoin-Groestl 17005 0.04031 2.23G 2
X11 Dash 17007 0.02006 706.00G 8
Skein Digibyte-Skein 17016 0.00890 29.66G 2
Sia Siacoin 17022 0.00057 2.32T 1
Keccak Maxcoin 17003 - 2.85G 1

So equihash is 6362
and ethash is .064

I think that's why miningpoolminer uses ethash

However, when ratio between hash between ethash and equihash is 30Mh/s per 300h/s so that means 100k times, whattomine would recommend equihash right now

Oh no. Still ethash. Hmmmm... Musiccoin though. Zclassic is not avaialable either in miningpoolhub.

Groestl is on top again.

Hmm your miner selection is correct then. Nvm.

Whattomine shows list sorted by average profitability for last 24 hours. But miningpoolhub shows sorted by realtime, current profitability.
I sometimes check whattomine and find myself confused by this little difference.


You sure? Whattomine display 4 numbers. Current, last 24 hours, 3 days and 7 days I think. I always select current. I sorted by current




Hey, then that's not the problem.
Both profitability thing doesn't need to match same because hardware normalization is manually set.

FYI, Zclassic was already listed, Musicoin is newly added on miningpoolhub now.
I know what you mean. The number in whattomine presume that an RX 480 will produce 300h/s equihash or 30mh/s ethash. I took that into account.

Also, besides at miningpoolhub front page, where else can we see un normalized BTC/GH/s/day? Just curious. The current ones.

The number in miningpoolhub doesn't take into account miningpoolhub "luck" right? It's exact number that should be universal based on difficulty etc.


I
newbie
Activity: 50
Merit: 0
Is the .0004 BTC fee for autopayments or only for cash outs? It isn't clear to me.
sr. member
Activity: 476
Merit: 250
I understand how the server-side dynamic coin switching works and how it waits till a block is found.  What I'm wondering is how that comes into play with PPLNS since its possible for the most profitable coin to change frequently.

For instance, I'm mining ethash only, port 17020. ETH is the most profitable, but then ETC becomes more profitable. ETH finds a block switches to ETC. Five minutes into ETC we find a block and ETH is more profitable again so it switches back. I'm not sure what the PPLNS is set for but I would only get 5 minutes worth of hashing for that round. Maybe MininigPoolHub can explain the math here? Why is there no "rounds" page at MPH?

The pool is working correctly from experience.

This may help but MiningPoolHub will be online to check your post later:

PPLNS is not that simple in our pool.

Pool uses quite longer period to calculate and this minimizes some switching user's loss.
Also pool distributes coins even at next height block who already switched to other coins but included in PPLNS range.

Without PPLNS, sometimes big hash miner gets whole block amount at fast block. This is not frequent on long block time coins like dash, but it happens quite frequently on ethereum like fast coins.

PPLNS is de-facto standard these days for pools, and have many variation settings.
We use longer period PPLNS, so it should be quite fair.
full member
Activity: 126
Merit: 100
I'm curious about the 17XXX ports.

Since each coin pool is PPLNS isn't coin switching essentially like pool hoping and therefor would lead to less profits long-term? Is PPLNS calculated per coin or per algo? If it were per algo I don't think it would be a problem.

It's per coin but this has been discussed before; you wont be penalized.

Any technical explaination on this? Are clients connected to the 17XXX port on a different PPLNS calculation or what? 100+ pages is a lot to go through.

No, each coin has it's own pool then the 17XXX port is like dynamic port forwarding.

I understand how the server-side dynamic coin switching works and how it waits till a block is found.  What I'm wondering is how that comes into play with PPLNS since its possible for the most profitable coin to change frequently.

For instance, I'm mining ethash only, port 17020. ETH is the most profitable, but then ETC becomes more profitable. ETH finds a block switches to ETC. Five minutes into ETC we find a block and ETH is more profitable again so it switches back. I'm not sure what the PPLNS is set for but I would only get 5 minutes worth of hashing for that round. Maybe MininigPoolHub can explain the math here? Why is there no "rounds" page at MPH?
sr. member
Activity: 476
Merit: 250
I'm curious about the 17XXX ports.

Since each coin pool is PPLNS isn't coin switching essentially like pool hoping and therefor would lead to less profits long-term? Is PPLNS calculated per coin or per algo? If it were per algo I don't think it would be a problem.

It's per coin but this has been discussed before; you wont be penalized.

Any technical explaination on this? Are clients connected to the 17XXX port on a different PPLNS calculation or what? 100+ pages is a lot to go through.

No, each coin has it's own pool then the 17XXX port is like dynamic port forwarding.
full member
Activity: 126
Merit: 100
I'm curious about the 17XXX ports.

Since each coin pool is PPLNS isn't coin switching essentially like pool hoping and therefor would lead to less profits long-term? Is PPLNS calculated per coin or per algo? If it were per algo I don't think it would be a problem.

It's per coin but this has been discussed before; you wont be penalized.

Any technical explaination on this? Are clients connected to the 17XXX port on a different PPLNS calculation or what? 100+ pages is a lot to go through.
sr. member
Activity: 476
Merit: 250
I'm curious about the 17XXX ports.

Since each coin pool is PPLNS isn't coin switching essentially like pool hoping and therefor would lead to less profits long-term? Is PPLNS calculated per coin or per algo? If it were per algo I don't think it would be a problem.

It's per coin but this has been discussed before; you wont be penalized.
full member
Activity: 126
Merit: 100
I'm curious about the 17XXX ports.

Since each coin pool is PPLNS isn't coin switching essentially like pool hoping and therefor would lead to less profits long-term? Is PPLNS calculated per coin or per algo? If it were per algo I don't think it would be a problem.
legendary
Activity: 1456
Merit: 1006
Mining Pool Hub
Musicoin Mining Pool Hub

https://musicoin.miningpoolhub.com


Musicoin pool is now open
Come and mine together

legendary
Activity: 1456
Merit: 1006
Mining Pool Hub
I've rented some scrypt hash power at nicehash, pointed it to mining pool hub at stratum+tcp://hub.miningpoolhub.com:17001, and turned it loose with a worker whose "job" is "Scrypt". I tested the worker setup at nicehash and it was all good. Mining pool hub says it's currently mining gamecredits on Scrypt at 17001, but I have no coins at all in gamecredits after 10 hours.

There's no errors on the nicehash side. Under the gamecredits dashboard it shows .02 share/sec with Your Valid   10,870,308.6511
Your Invalid   52,919.9375 (0.48%) under round shares.

It seems like it's all connected but no coins are showing up in mining pool hub. What's wrong?


17001 changes mining coin frequently so you may have got some other coins like SXC, Verge.
Gamecredits pool finds blocks rarely. You will get reward when block is found. You can see detailed info at Blocks page

It's limited from my side. Please leave your id or username if you want me to analyze what the problem is.
legendary
Activity: 1456
Merit: 1006
Mining Pool Hub
How much does a GTX 1070 do in ethereum?

Whattomine says 28.5 Mh/s currently.
legendary
Activity: 1456
Merit: 1006
Mining Pool Hub
I saw this table at miningpoolhub
Code:
Equihash Zcash 17023 6,362.14238 703.63K 2
Cryptonight Monero 17024 1,732.88262 2.45M 1
Yescrypt Myriadcoin-Yescrypt 17021 78.42032 133.00K 2
NeoScrypt Feathercoin 17012 1.76224 309.16M 3
Lyra2z Zcoin 17025 1.54223 13.59G 1
Ethash Ethereum 17020 0.06424 1.67T 3
Lyra2RE2 Vertcoin 17018 0.05724 3.86G 1
Scrypt Gamecredits 17001 0.05640 567.43M 4
Qubit Digibyte-Qubit 17014 0.05438 6.40G 2
Groestl Groestlcoin 17004 0.04902 380.95M 1
Myriad-Groestl Myriadcoin-Groestl 17005 0.04031 2.23G 2
X11 Dash 17007 0.02006 706.00G 8
Skein Digibyte-Skein 17016 0.00890 29.66G 2
Sia Siacoin 17022 0.00057 2.32T 1
Keccak Maxcoin 17003 - 2.85G 1

So equihash is 6362
and ethash is .064

I think that's why miningpoolminer uses ethash

However, when ratio between hash between ethash and equihash is 30Mh/s per 300h/s so that means 100k times, whattomine would recommend equihash right now

Oh no. Still ethash. Hmmmm... Musiccoin though. Zclassic is not avaialable either in miningpoolhub.

Groestl is on top again.

Hmm your miner selection is correct then. Nvm.

Whattomine shows list sorted by average profitability for last 24 hours. But miningpoolhub shows sorted by realtime, current profitability.
I sometimes check whattomine and find myself confused by this little difference.


You sure? Whattomine display 4 numbers. Current, last 24 hours, 3 days and 7 days I think. I always select current. I sorted by current




Hey, then that's not the problem.
Both profitability thing doesn't need to match same because hardware normalization is manually set.

FYI, Zclassic was already listed, Musicoin is newly added on miningpoolhub now.
legendary
Activity: 1456
Merit: 1006
Mining Pool Hub
Hi everyone Smiley

I mined Ethereum. I set Auto Exchange to Bitcoin. For last two weeks everything working great. But on 2017-04-15 some of mined coins (0.15 ETH) get stuck in column "On Exchange", and after three days, this coins are still there.

In the past, coins was exchange to Bitcoin in approx. 6 hours. What's wrong?

Best regards,
Shymmy

P.S. I'm sorry for my poor English Smiley

Hi
Some coins were stuck due to exchange API error. Most coins were exchanged correctly but some were stuck waiting admin to review the stat.

I believe it's all resolved now.
Please leave message with your id if you still experience some problem.

Thanks.
legendary
Activity: 1456
Merit: 1006
Mining Pool Hub
Ok I am confused. I am using  MultiPoolMiner

I want to use MPH as I am tired of switching between Zclassic, Zcash. But by default, my miners point to port 17023. Not 12xxx.

So what is the difference between the 3 ports:

europe.equihash-hub.miningpoolhub.com:12023
europe.equihash-hub.miningpoolhub.com:17023
europe.equihash-hub.miningpoolhub.com:20575

Do I need to change anything? If so where do I change it.




12023 is equihash endpoint. You need to set hub worker's job to use this feature. This is little bit complicate but has the most flexible configuration. You can set coin/algo/multi-algo with one click.
17023 is equihash auto switch port. You may mine zcash, and zclassic. You don't need multipoolminer to mine one algo. Just point to 17023 port and pool will switch internally.
20575 is zclassic's port. It's common classic port like other pools.


There's no one page view to see miner stats if you use coin/algo switching. I'll add that.
sr. member
Activity: 476
Merit: 250
What is the method used to figure out your share of BTC doing SHA mining?

You will never find anything:
https://bitcoin.miningpoolhub.com/
Quote
You can mine bitcoin at here but we don't recommend.
Actually this is not a pool for mining, but a pool to credit bitcoins from auto exchanges.

Just set your 'Auto Exchange' coin to Bitcoin then mine a different algorithm.
Jump to: