Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 48. (Read 487796 times)

mined almost 24hr verge, the calculator said around 90 coins, got 40...staying away from this pool for good...

Is this pool going to be up to speed with the XMR fork right away when it happens in a couple weeks?

Electroneum and Gamecredits (along with some others) will not autoexchange as the exchanges MPH uses to do the autoexchange do not have either of these coins. Have a look at the "Auto Exchange Coin" page on MPH and you will see these coins are crossed out.
You will have to maually send them to an exchange that has these coins.

EDIT: Gamescredits only delayed for autoexchange, but this may be a long time as it depends on the exchange,
        Update form MPH "Gamecredits wallet is under maintenance on Bittrex. Auto exchange requests related to Gamecredits would be stopped or delayed temporarily."

This error "Failed to update your account: Address is already in use"  will occur if there is another account on MPH using the same address.
What looks like has happened is that you, and someone else, have entered the ETN address but forgotten to put in the Payment ID provided by Kucoin.
(Kucoin probably uses the same address for everyone but the Payment ID will be unique and this is what will identify your account)

MHP mentions it here, under "Check before you start." https://electroneum.miningpoolhub.com/

The format on MPH is (the "." is required):


Your ETN address, with Payment ID, would then look like this:

Hi, would you consider adding Argentum to your pool.

6 mining algorithms. Sha256, Scrypt, Lyra2rev2, Argon2d, Yescrypt, Myriad-Groestl.

SHA256 and Scrypt are AUXPOW

https://bitcointalksearch.org/topic/annarg-argentum-a-new-begining-update-your-wallet-1432608

https://github.com/argentumproject/argentum

I am having the same problem with Electroneum sitting in my Auto Exchange Wallet for days.

Newly mined Electroneum is not automatically moved to the Auto Exchange wallet.  It can be manually moved.

I tried manually moving the Electronium back to the Normal Wallet and then back to the the Auto Exchange Wallet.  The transfers between the wallets work but I never see the transfer to Litecoin.


(Auto Exchange is enabled for Electroneum and my Auto Exchange Coin is Litecoin.)

ETN has an address and a PaymentID field. Doesn't Kucoin provide you with a PaymentID? Or MPH doesn't give you the option to input the ID?
If you get the error that the address is already in use, then obviously Kucoin uses one address for every client but gives different PaymentIDs to each one.

i have pointed my titan to scrypt auto switch. is there stats for the page? how can i know my hashrate?

The problem is GAME itself - it went through an emergency hard fork, I wouldn't be surprised the exchange is delayed somewhat.

Hi

Is there a problem with the Auto Exchange feature?  I mined some game credits over a few days ended up with about 85.  I enabled auto exchange but its been 4 days and the balances page says its just sitting on the exchange.  Hope you can help.

https://1drv.ms/u/s!AuCm-nE2dL8pmTqThtKRMU-aL4LV

Cheers

Hey peeps,

ETN just got listed on Kucoin, I'd like to move my ETN to the exchange.

When I enter my Kucoin ETN deposit address to MPH wallet it says "Failed to update your account: Address is already in use"

Do you guys know what to do?

Thank you.

I don't know how Awesome miner works but ports 17xxx are for different coins on the same algo and ports 20xxx are for individual coins so the profit numbers will be different.
A long time would be at least 24 hours, you will not get anywhere near an acurate reading from 20 minutes.

I've tried "multipool/algo switching" mining programs and didn't like them. There is an inherent delay in the switching time (time wasted losing you money) the small advantage you may have had switching is lost in the switching delay. Find a coin you like and use a miner specifically made for that coin, this will give you the best return (you can set each card to mine a different coin on a different pool with different/same mining programs - or any combination you want).

I've started mining early January this year and was using NiceHash until the end of February.  I've started using Awesome Miner and mining in MPH pools.  I wonder what is the best way to mine considering my setup of 6x 1070 GPUs.  I've tried adding individual pools and combining that into a custom pool:
https://i.imgur.com/1vPq2D3.jpg


I've also tried just ticking the MPH button as pointed to by the red arrow:
https://i.imgur.com/nopPech.jpg


What I've noticed is that pools from the MPH button are ports 17XXX while the ones that I've added are ports 20XXX and that the profit numbers do not match.  I was told that the 17XXX port algos get their profit numbers from MPH whereas the 20XXX port algos get their profit numbers from WhatToMine.  I have a feeling I'm doing things wrong but I can't exactly figure out what.

Is it better to be mining a specific coin, ie, ZEC for a long time considering PPLNS?  Therefore using a 20570 port?
Is it better to be mining a specific algo, ie, Equihash for a long time considering PPLNS?  Therefore using a 17023 port?
Is it better just to tick the MPH box and let it mult-algo, multi-coin for a long time considering PPLNS?

What exactly is "a long time"?  Looking at MPH ZCL page, it looks like blocks are found every 2-3 minutes, so is 20 minutes a long enough time considering PPLNS?

Comparing ZCL with ZEC,
ZCL says Est. Avg. Time per round (network) is 2min 15sec, Est Avg. Time per round (pool) is 3min 2sec
ZEC says Est. Avg. Time per round (network) is 2min 47sec, Est Avg. Time per round (pool) is 27min 16sec
Why is the ZEC (pool) time much longer?  What does that mean?

Thanks!

Thanks, still dont work, i try to add stratum://tcp: at the beggining of url but...

sounds more like you have  bugged wallet....

at this link they go over the steps to restore the wallet... longest part is the blockchain re-sync
i have had to use this myself..  after which the wallet worked fine for electroneum

https://www.downloadsource.net/how-to-fix-electroneum-etn-wallet-showing-0-balance/n/11022/

is anything wrong with ethereum pool?
getting errors with AM connecting to it (port 20536) and if i change to port 20535 miner dont accept shares.
change to profit managed and I only get equihash mining

Never mind. Looks like the same block is still being worked on

Anyone having issues with Dash transactions not being updated?

Been running at 12GH for a few hours, dashboard shows correct hashrate, worker shows as active, but no updates to transactions/balance.

I do not use antminer but I believe instead of usrid it would be username, pass leave it blank, is what I know about antminer configuration

Hope this helps

Hi, what is the config for a D3 for startcoin mining?
I have this:
-->http://hub.miningpoolhub.com:20509/
-->mynumberid.myworker
-->pass
But nothing is showing

Can you help¿