Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 50. (Read 487796 times)
March 07, 2018, 06:09:11 AM
anyone with 1080ti can tell me how much is making per card? i use multipoolminer and mine it shows .00038 per card +-15%.
March 06, 2018, 08:02:35 AM
i have my auto pay set to ethereum, but sometimes i get ethereum sent to the auto exchange wallet...
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
If you want payouts in ETH you need to turn off ETH on the auto exchange page so everything goes into the normal ETH wallet and not the ETH auto exchange wallet.
no you dont
March 06, 2018, 05:11:53 AM
i have my auto pay set to ethereum, but sometimes i get ethereum sent to the auto exchange wallet...
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
I noticed that too some time ago. Just disable autoexchange for ethereum on the "Auto Exchange" page
March 06, 2018, 02:59:58 AM
March 06, 2018, 12:57:06 AM
i have my auto pay set to ethereum, but sometimes i get ethereum sent to the auto exchange wallet...
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
If you want payouts in ETH you need to turn off ETH on the auto exchange page so everything goes into the normal ETH wallet and not the ETH auto exchange wallet.
hmm i figured that would be automatic if you specify an auto exchange coin.. i turned ethereum off.. lets see if that fixes it.
March 05, 2018, 07:13:48 PM
i have my auto pay set to ethereum, but sometimes i get ethereum sent to the auto exchange wallet...
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
If you want payouts in ETH you need to turn off ETH on the auto exchange page so everything goes into the normal ETH wallet and not the ETH auto exchange wallet.
March 05, 2018, 04:18:19 PM
i have my auto pay set to ethereum, but sometimes i get ethereum sent to the auto exchange wallet...
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
i been just sending it back when i notice, but this is a bug? if i dont notice where would those coins go?
March 05, 2018, 11:20:03 AM
A Little Help PLEASE from MPH support.
I have successfully configured Awesome Mining to work with MPH (Mining Pool Hub) with GPU and CPU.
I had mined more than 70 coins which were stored in the normal wallet without an "AUTOMATIC PAYOUT THRESHOLD" being set.
About a week ago I decided to set an Auto Payout Threshold for the coins to go to my wallet address, but they have not arrived and I can't see the transaction on on MPH.
Could the Electroneum pool hardfork bug have blocked or destroyed the transfer to my wallet?
I would appreciate if someone at MPH would check if the transfer was made to my wallet address: etnkPiKgUPHKKjVp9qoBaJSu4cL8bgGe3SAcARHz5bHPGypaN895vf9JTgCXzqHbgTP4Ykuge58ded1 p6wLNkLeX1cmrStt4BF
NOTE I have since used a different wallet address to which I have received coins ok .
Any help from MPH support would be greatly appreciated.
I have successfully configured Awesome Mining to work with MPH (Mining Pool Hub) with GPU and CPU.
I had mined more than 70 coins which were stored in the normal wallet without an "AUTOMATIC PAYOUT THRESHOLD" being set.
About a week ago I decided to set an Auto Payout Threshold for the coins to go to my wallet address, but they have not arrived and I can't see the transaction on on MPH.
Could the Electroneum pool hardfork bug have blocked or destroyed the transfer to my wallet?
I would appreciate if someone at MPH would check if the transfer was made to my wallet address: etnkPiKgUPHKKjVp9qoBaJSu4cL8bgGe3SAcARHz5bHPGypaN895vf9JTgCXzqHbgTP4Ykuge58ded1 p6wLNkLeX1cmrStt4BF
NOTE I have since used a different wallet address to which I have received coins ok .
Any help from MPH support would be greatly appreciated.
March 05, 2018, 09:17:12 AM
auto-switching? you mean auto-exchange?
auto-switching is just that, switching to mine different coin.
yes sorry that's what i meant. auto-exchange
rgs
zac
March 05, 2018, 09:11:36 AM
just want to confirm fees with MPH.
so there is a 0.0001 fee for transfer to my wallet & a 0.9% fee for the pool? is this correct? any other fees?
are there any fees for auto switching?
also is the 0.9% taken automatically before my balance appears?
thanks
zac
so there is a 0.0001 fee for transfer to my wallet & a 0.9% fee for the pool? is this correct? any other fees?
are there any fees for auto switching?
also is the 0.9% taken automatically before my balance appears?
thanks
zac
auto-switching? you mean auto-exchange?
auto-switching is just that, switching to mine different coin.
March 05, 2018, 08:28:32 AM
just want to confirm fees with MPH.
so there is a 0.0001 fee for transfer to my wallet & a 0.9% fee for the pool? is this correct? any other fees?
are there any fees for auto switching?
also is the 0.9% taken automatically before my balance appears?
thanks
zac
so there is a 0.0001 fee for transfer to my wallet & a 0.9% fee for the pool? is this correct? any other fees?
are there any fees for auto switching?
also is the 0.9% taken automatically before my balance appears?
thanks
zac
March 05, 2018, 05:25:45 AM
Now you can set starting difficulty value by typing like "d=0.01" at worker's password.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value.
Keep in mind that difficulty value must be stabilized.
We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX"
ex) d=0.0312
Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again.
You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug.
d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value.
Keep in mind that difficulty value must be stabilized.
We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX"
ex) d=0.0312
Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again.
You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug.
d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
Please can you to be more clear about point "2", I see that claymore setting the diff with number without "dot" example "52216", can you write an example string to put in the config file? Thanks in advance
good luck with it... I've yet to get the d=xxx to work on any of my antminers ... I've been hoping for them to get the Siacoin pool to work with the A3 but no luck there (it keeps setting the diff to 1 no matter what I put). If they would get it to work they could save the siacoin pool on MPH instead of having a dead pool in the list. In the mean time I'm sending 3.4TH to siamining.com waiting on MPH to get this to work. I guess that is why the scrypt and x11 also don't seem to get much traffic.
March 04, 2018, 07:45:21 PM
Any idea when Bitcoin Private pools will be up?
They announced they will add it ?
Its already up on Supernova and others
this is not how it works. Admin is insanely lazy now we need an alternative asap
They posted on their twitter acc that they will support btcp but want to test the wallet first. But latter posts said they are not sure if they will add it if i read it right. I hope they will add it
https://twitter.com/MiningPoolHub/status/969222871909253120
Ok cool, then probably the next week or two should be up, the wallets are working great so far. Hope they get all that up soon, prefer MPH over Supernova and others.
March 04, 2018, 06:55:25 PM
anyone know how can I claim the btcp from zcl coins I had stuck in cash out from mph pool at the time of snapshot? They arrived to my wallet one hour after the snapshot
nope i guess only the MPH team can tell you.
March 04, 2018, 06:43:46 PM
Any idea when Bitcoin Private pools will be up?
They announced they will add it ?
Its already up on Supernova and others
this is not how it works. Admin is insanely lazy now we need an alternative asap
They posted on their twitter acc that they will support btcp but want to test the wallet first. But latter posts said they are not sure if they will add it if i read it right. I hope they will add it
https://twitter.com/MiningPoolHub/status/969222871909253120
March 04, 2018, 05:55:01 PM
Any idea when Bitcoin Private pools will be up?
They announced they will add it ?
Its already up on Supernova and others
this is not how it works. Admin is insanely lazy now we need an alternative asap
March 04, 2018, 05:54:25 PM
anyone know how can I claim the btcp from zcl coins I had stuck in cash out from mph pool at the time of snapshot? They arrived to my wallet one hour after the snapshot
March 04, 2018, 04:54:25 PM
Any idea when Bitcoin Private pools will be up?
They announced they will add it ?
Its already up on Supernova and others, i would hope they would add it since they support ZCL which its forked from. Would prefer to mine using MPH over the others.
March 04, 2018, 08:09:29 AM
Any idea when Bitcoin Private pools will be up?
They announced they will add it ?
March 04, 2018, 07:50:29 AM
Having problems with Equihash autoswitch
MPH multi-algo switching
https://miningpoolhub.com/?page=gettingstarted
asia.equihash-hub.miningpoolhub.com:12023
us-east.equihash-hub.miningpoolhub.com:12023
most of the cases doesn't mine the most profitable coin, and doesn't switch properly.
MPH Custom autoswitch (3 equihash coin)
asia.equihash-hub.miningpoolhub.com:17023 (ZEN)
asia.equihash-hub.miningpoolhub.com:17023 (ZEC)
asia.equihash-hub.miningpoolhub.com:17023 (BTG)
same case. And yes, I have the profit switch threshold on
Bminer Multi-algo switch mining on Miningpoolhub
https://www.bminer.me/examples/
stratum://foo.w:[email protected]:17023
sometimes gives like $3 above from what it says in awesome miner, sometimes gives like $2 less.
From the other hand, sometimes mine not the most profitable. so what's the point of this pool???
MPH multi-algo switching
https://miningpoolhub.com/?page=gettingstarted
asia.equihash-hub.miningpoolhub.com:12023
us-east.equihash-hub.miningpoolhub.com:12023
most of the cases doesn't mine the most profitable coin, and doesn't switch properly.
MPH Custom autoswitch (3 equihash coin)
asia.equihash-hub.miningpoolhub.com:17023 (ZEN)
asia.equihash-hub.miningpoolhub.com:17023 (ZEC)
asia.equihash-hub.miningpoolhub.com:17023 (BTG)
same case. And yes, I have the profit switch threshold on
Bminer Multi-algo switch mining on Miningpoolhub
https://www.bminer.me/examples/
stratum://foo.w:[email protected]:17023
sometimes gives like $3 above from what it says in awesome miner, sometimes gives like $2 less.
From the other hand, sometimes mine not the most profitable. so what's the point of this pool???
Jump to: