[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 46.

trusol

newbie

Activity: 1

Merit: 0

Quote from: ivitaliich on March 19, 2018, 03:17:54 PM

Quote from: vtrsp1 on March 18, 2018, 01:01:02 PM

Quote from: ivitaliich on March 18, 2018, 11:52:22 AM

@miningpoolhub
Hello. How long it takes to exchange LTC to zec?
https://imgur.com/QyPXAD7
https://imgur.com/Ip6mhhV
From 6 : 00 (UTC) till now funds are on autoexchange wallet. And dont go to the exchange.

it takes some time to send the currency to the exchange,they send it out in biger volumes.so thake a beer and relax you get your zec.....never lost a coin

More than 24 hrs. Still the same... Not on Exchange.

I feel yah. I've been waiting too. Did yours ever get onto the exchange?

phoentje

newbie

Activity: 5

Merit: 0

Quote from: nazzer on March 22, 2018, 09:05:26 AM

Quote from: phoentje on March 22, 2018, 02:23:17 AM

Quote from: nazzer on March 21, 2018, 07:27:52 PM

Quote from: phoentje on March 21, 2018, 05:20:04 AM

I started mining on XVG (where there is no DGB Scrypt mining on this pool).

1. Is there a way to calculate the difficulty settings for my Antminer L3+ on Verge?
2. Howcome I see 500.000+ in my miner config but on the pool status I reach no more then 400000khz

The pool doesn't know how fast the miner claims to be, it calculates hash rate based on shares received.

The L3+'s 504MH is based on ideal work - from experience, due to work restarts (new block) 450MH seems to be the achievable maximum based on the way the L3+ batches the work on the ASICs.

Miningpoolhub isn't great at showing historical share hash rate, just run it for a few days and look at the coins received on the dashboard to decide if it's worth mining there.

For me, fees are low - it's worth it Wink

Thanks for the reply!
So you are also not running on a fixed difficulty? Just variable?

On wich coin are you mining here? Atm I am getting around 180-200 XVG a day.

I'm not mining with my L3+ here anymore; wanted to mine a different coin.

I mine Ethereum on this pool though.

I'm not mining with my L3+ here anymore; wanted to mine a different coin.

Hint me !

nazzer

member

Activity: 238

Merit: 11

Quote from: phoentje on March 22, 2018, 02:23:17 AM

Quote from: nazzer on March 21, 2018, 07:27:52 PM

Quote from: phoentje on March 21, 2018, 05:20:04 AM

I started mining on XVG (where there is no DGB Scrypt mining on this pool).

1. Is there a way to calculate the difficulty settings for my Antminer L3+ on Verge?
2. Howcome I see 500.000+ in my miner config but on the pool status I reach no more then 400000khz

The pool doesn't know how fast the miner claims to be, it calculates hash rate based on shares received.

The L3+'s 504MH is based on ideal work - from experience, due to work restarts (new block) 450MH seems to be the achievable maximum based on the way the L3+ batches the work on the ASICs.

Miningpoolhub isn't great at showing historical share hash rate, just run it for a few days and look at the coins received on the dashboard to decide if it's worth mining there.

For me, fees are low - it's worth it Wink

Thanks for the reply!
So you are also not running on a fixed difficulty? Just variable?

On wich coin are you mining here? Atm I am getting around 180-200 XVG a day.

I'm not mining with my L3+ here anymore; wanted to mine a different coin.

I mine Ethereum on this pool though.

phoentje

newbie

Activity: 5

Merit: 0

Quote from: nazzer on March 21, 2018, 07:27:52 PM

Quote from: phoentje on March 21, 2018, 05:20:04 AM

I started mining on XVG (where there is no DGB Scrypt mining on this pool).

1. Is there a way to calculate the difficulty settings for my Antminer L3+ on Verge?
2. Howcome I see 500.000+ in my miner config but on the pool status I reach no more then 400000khz

The pool doesn't know how fast the miner claims to be, it calculates hash rate based on shares received.

The L3+'s 504MH is based on ideal work - from experience, due to work restarts (new block) 450MH seems to be the achievable maximum based on the way the L3+ batches the work on the ASICs.

Miningpoolhub isn't great at showing historical share hash rate, just run it for a few days and look at the coins received on the dashboard to decide if it's worth mining there.

For me, fees are low - it's worth it Wink

Thanks for the reply!
So you are also not running on a fixed difficulty? Just variable?

On wich coin are you mining here? Atm I am getting around 180-200 XVG a day.

nazzer

member

Activity: 238

Merit: 11

Quote from: phoentje on March 21, 2018, 05:20:04 AM

I started mining on XVG (where there is no DGB Scrypt mining on this pool).

1. Is there a way to calculate the difficulty settings for my Antminer L3+ on Verge?
2. Howcome I see 500.000+ in my miner config but on the pool status I reach no more then 400000khz

The pool doesn't know how fast the miner claims to be, it calculates hash rate based on shares received.

The L3+'s 504MH is based on ideal work - from experience, due to work restarts (new block) 450MH seems to be the achievable maximum based on the way the L3+ batches the work on the ASICs.

Miningpoolhub isn't great at showing historical share hash rate, just run it for a few days and look at the coins received on the dashboard to decide if it's worth mining there.

For me, fees are low - it's worth it Wink

HussoFPV

newbie

Activity: 3

Merit: 0

Where does MiningPoolHub get it's data from regarding profitability?

I've noticed it's saying on their site that currently MonaCoin is currently the most profitable coin to mine, but on awesome miner, my rigs haven't made the switch & according to whattomine.com, the MonaCoin is no where near profitable to what it's currently mining now (ETH).

Is MiningPoolHub incorrect or am i missing something here?

Thanks in advance!

phoentje

newbie

Activity: 5

Merit: 0

I started mining on XVG (where there is no DGB Scrypt mining on this pool).

1. Is there a way to calculate the difficulty settings for my Antminer L3+ on Verge?
2. Howcome I see 500.000+ in my miner config but on the pool status I reach no more then 400000khz

ivitaliich

newbie

Activity: 3

Merit: 0

Quote from: vtrsp1 on March 18, 2018, 01:01:02 PM

Quote from: ivitaliich on March 18, 2018, 11:52:22 AM

@miningpoolhub
Hello. How long it takes to exchange LTC to zec?
https://imgur.com/QyPXAD7
https://imgur.com/Ip6mhhV
From 6 : 00 (UTC) till now funds are on autoexchange wallet. And dont go to the exchange.

it takes some time to send the currency to the exchange,they send it out in biger volumes.so thake a beer and relax you get your zec.....never lost a coin

More than 24 hrs. Still the same... Not on Exchange.

nazzer

member

Activity: 238

Merit: 11

Quote from: ?? on ??

Where is the problem with XMR pool? 400% shares at a 18354.9 kh/s speed? The current block is mined by 5-6 hours, at least. At this speed, dozens should be already mined.

Fix your code, it's a waste of time and electricity. This problem started 3 days ago and i found no support for this pool.

You do realise mining is based on luck and probability, right?

1 in 54.6 blocks is statistically going to be at 400% shares ... see the CDF table below:

Code:

 0.39346934028737    50.000%  1 in 1.6
 0.63212055882856   100.000%  1 in 2.7
 0.77686983985157   150.000%  1 in 4.5
 0.86466471676339   200.000%  1 in 7.4
 0.95021293163214   300.000%  1 in 20.1
 0.98168436111127   400.000%  1 in 54.6
 0.99326205300091   500.000%  1 in 148.4
 0.99752124782333   600.000%  1 in 403.4
 0.99872735771441   666.666%  1 in 785.8
 0.99908811803445   700.000%  1 in 1096.6
 0.99966453737210   800.000%  1 in 2981.0
 0.99987659019591   900.000%  1 in 8103.1
 0.99999385578765  1200.000%  1 in 162754.8
 0.99999998477002  1800.000%  1 in 65659969.2
 0.99999999996225  2400.000%  1 in 26489113602.6
 1.00000000000000  3600.000%  1 in 4503599627370496.0

playfast

jr. member

Activity: 131

Merit: 3

Quote from: Call_Me_Bambi on March 18, 2018, 12:24:01 AM

Quote from: playfast on March 17, 2018, 04:10:18 PM

Anyone else getting lots of socket errors/failover with Claymore today?

I've been mining Ethereum with Claymore 11.4 and for the past 20 hours (had to do a bit of maintenance on the rig) have had not a single error, it's running like clockwork.

Back to normal today, problem yesterday was on my end, I have unreliable ISP Angry

vtrsp1

newbie

Activity: 31

Merit: 0

Quote from: ivitaliich on March 18, 2018, 11:52:22 AM

@miningpoolhub
Hello. How long it takes to exchange LTC to zec?
https://imgur.com/QyPXAD7
https://imgur.com/Ip6mhhV
From 6 : 00 (UTC) till now funds are on autoexchange wallet. And dont go to the exchange.

it takes some time to send the currency to the exchange,they send it out in biger volumes.so thake a beer and relax you get your zec.....never lost a coin

ivitaliich

newbie

Activity: 3

Merit: 0

@miningpoolhub
Hello. How long it takes to exchange LTC to zec?
https://imgur.com/QyPXAD7
https://imgur.com/Ip6mhhV
From 6 : 00 (UTC) till now funds are on autoexchange wallet. And dont go to the exchange.

aGeoM

newbie

Activity: 43

Merit: 0

@miningpoolhub

Hi

Do you have any plans to add new algos like nist5 (ethf.bwk)? Thank you.

All the best.

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: playfast on March 17, 2018, 04:10:18 PM

Anyone else getting lots of socket errors/failover with Claymore today?

I've been mining Ethereum with Claymore 11.4 and for the past 20 hours (had to do a bit of maintenance on the rig) have had not a single error, it's running like clockwork.

KnockUOut

newbie

Activity: 7

Merit: 0

Quote from: zac123 on March 17, 2018, 06:04:45 AM

Quote from: KnockUOut on March 16, 2018, 09:38:40 PM

Fix this MPH. WTF

Looks like it's all working now

Looks that way. Thanks

GUI_Center

member

Activity: 72

Merit: 10

If anyone would like to go back to MultiPoolMiner v2.7.1.4 pre-miner window hiding, I have a uploaded a repository with updated miners like Phoenix 2.7c and Claymore v11.5. Plan to keep miners up to date as best I can and release new versions when necessary. It also integrates with miningpoolhubstats.com for better web-based tracking.

playfast

jr. member

Activity: 131

Merit: 3

Anyone else getting lots of socket errors/failover with Claymore today?

Davhouck

newbie

Activity: 1

Merit: 0

ANyone know why i just started using SMOS and mining ZCASH with MPH with dstm miner and all the sudden my WALLET is not showing any new coins why?? suggestions ?

fbassett1

newbie

Activity: 2

Merit: 0

All seems to be working again.

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: Gorgo126 on March 16, 2018, 06:40:06 PM

Hi !

I'm new on Mining Pool Hub...
Just starting and all seem to work perfectly but a little question...

I configure to mine on Ethash algo because I would like to use CLaymore...
I configure Auto Exchange to Ethereum.

My miner mine... I see Ethereum coin in my balance menu.

My question 1 : How can I see wich crypto I mine at this moment ?
My question 2 : Can I disable Auto Exchange and make exhange after ?

Thanks a lot !
Gorgo

My Answer 1 :
You would have to check each Ethash coin to see which one is being mined. You could use the API KEY to do this, see your "Edit Account" page for your API Key and set a Web bookmark to view each coin to see which was being mined or use this app, it's free with some annoying adds, https://bitcointalksearch.org/topic/android-mining-pool-hub-monitor-free-application-2067709
API KEY commands: https://github.com/miningpoolhub/php-mpos/wiki/API-Reference

My Answer 2 :
Yes. When you decide want to exchange a coin set the "Auto Exchange Coin" to the coin you want to exchange to, then in the wallet, of the mined coin, click the arrow, in the TRANSFER box, to "Auto Exchange Wallet".

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 46. (Read 487796 times)