[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 77.

neur0x

newbie

Activity: 12

Merit: 0

Quote from: zcrypts on January 15, 2018, 12:26:01 PM

These are IPS of the mining pool servers, check ping for each and choose one that works best for you

europe.equihash-hub.miningpoolhub.com 139.162.138.168
europe.equihash-hub.miningpoolhub.com 172.104.180.119
europe.equihash-hub.miningpoolhub.com 172.104.106.153
europe.equihash-hub.miningpoolhub.com 172.104.127.76
europe.equihash-hub.miningpoolhub.com 139.162.73.35
europe.equihash-hub.miningpoolhub.com 172.104.189.59

That being said, you should probably use fqdn as it will return the fastest server for your area, if I'm not mistaken.

I'm in Europe, only server under 250ms is 139.162.138.168 at 50ms for me and it's not accepting connections at the moment.

zcrypts

newbie

Activity: 27

Merit: 0

Every pool has issues from time to time, you will not be happy with any pool's support from my experience. Nanopool had similar issues recently, where mining stopped for a whole day and you think they issued an explanation or an apology? Yeah right...

You also have to be realistic, and know that pools will have downtimes from time to time. After all, updates need to be applied and machines restarted.

The best thing to do is to be patient. Issues like these affect pool owner's profits as well, so it's in their interest to fix it.
I started with Ethermine then found that Nanopool is rewarding more and showing better profit in their calculator so I switched. After 4 months, I came across MPH and I like the idea of multi coin mining, and so far I'm happy. It's easy to switch pools if you are not happy.

neur0x

newbie

Activity: 12

Merit: 0

I'm pretty sure they're just doing round robin DNS, as I had one rig on one of the true European servers and other rigs on the Japanese or whatever they are... So it depends, which you get on the first dns resolution.

It's happening on the eth-hub aswell, I already posted multiple times about this, I tweeted MPH, and zero response until now. I would like to keep my rigs on MPH, but i've been testing etherminer the last couple days and will do rerun of nanopool as the support on MPH on this issue has been non-existant.

bob7585

newbie

Activity: 5

Merit: 0

Hello I put a sum of ethereum on the automatic exchange, I wanted to put back on my normal wallet and I understand not, there is more my funds on my account Huh

?

ID : bob75

ID Date TX Type Status Payment Address TX # Block # Amount

1161118981 2018-01-15 17:21:41 (UTC) Debit_AE Confirmed n/a 0.07500469

zcrypts

newbie

Activity: 27

Merit: 0

These are IPS of the mining pool servers, check ping for each and choose one that works best for you

europe.equihash-hub.miningpoolhub.com 139.162.138.168
europe.equihash-hub.miningpoolhub.com 172.104.180.119
europe.equihash-hub.miningpoolhub.com 172.104.106.153
europe.equihash-hub.miningpoolhub.com 172.104.127.76
europe.equihash-hub.miningpoolhub.com 139.162.73.35
europe.equihash-hub.miningpoolhub.com 172.104.189.59

That being said, you should probably use fqdn as it will return the fastest server for your area, if I'm not mistaken.

crushed

member

Activity: 103

Merit: 11

Quote from: cryptoyes on January 15, 2018, 11:48:48 AM

I have no idea what you're on about ...

Code:

# ping 139.162.138.168
PING 139.162.138.168 (139.162.138.168) 56(84) bytes of data.
64 bytes from 139.162.138.168: icmp_seq=1 ttl=48 time=22.0 ms
64 bytes from 139.162.138.168: icmp_seq=2 ttl=48 time=21.9 ms
^C
--- 139.162.138.168 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 21.962/22.007/22.052/0.045 ms

That's from within Europe. I'm mining on it (port 17023)

EDIT: No, I'm not. Connections are now refused. Damn ... this pool is plagued with problems.

Code:

# telnet 139.162.138.168 17023
Trying 139.162.138.168...
telnet: Unable to connect to remote host: Connection refused

There are rolling restarts of mining servers to deal patch for the Meltdown vulnerability. From the main page:

- Some mining servers will be restarted one by one to patch Intel meltdown vulnerability. Mining rigs can be disconnected intermittently but will recover soon.

Might just want to redirect miners until the patching is completed.

cryptoyes

member

Activity: 297

Merit: 10

Quote from: sir_blacks on January 15, 2018, 09:50:00 AM

Quote from: cryptoyes on January 15, 2018, 09:41:19 AM

For the EU server, use the IP (don't use the fqdn!): 139.162.138.168 ... you're welcome, I don't want any bitcoins

Anyone knows if ETN is working for auto-switch on cryptonight? Only monero shows a port.

dear one 139.162.138.168 is server what was or is on Germany & what i say it just died or stop working it was not respond at any trace, ping from me or any other site what it can back trace ip ...

now i check agen & it semns it get try be alive high ping replay but at list it not say time out or not been found ...

same whats point have dns like "europe.equihash-hub.miningpoolhub.com" what behind there are 5 server 2 in Japan, 2 in Singapore & 1 on Germany ... my geography, geolocation it fail getting in a infinite loop error or my be europe was moved to Japan Cheesy

& i was not know :p

I have no idea what you're on about ...

Code:

# ping 139.162.138.168
PING 139.162.138.168 (139.162.138.168) 56(84) bytes of data.
64 bytes from 139.162.138.168: icmp_seq=1 ttl=48 time=22.0 ms
64 bytes from 139.162.138.168: icmp_seq=2 ttl=48 time=21.9 ms
^C
--- 139.162.138.168 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 21.962/22.007/22.052/0.045 ms

That's from within Europe. I'm mining on it (port 17023)

EDIT: No, I'm not. Connections are now refused. Damn ... this pool is plagued with problems.

Code:

# telnet 139.162.138.168 17023
Trying 139.162.138.168...
telnet: Unable to connect to remote host: Connection refused

CryptoWaffle

jr. member

Activity: 187

Merit: 2

Quote from: crushed on January 15, 2018, 10:31:25 AM

Quote from: zardozer on January 14, 2018, 10:57:47 PM

9) there are sites/tools to help make things easier with this pool

Which sites / tools are you guys using for MPH?
I know mph stats... anything else?

Thanks

A few are:

Awesome Miner
Nemos Miner
MultiPool Miner
mph_switch

You need to figure out if they work for your scenario or not and if you want to invest the time and, in some cases, money.

any of those where I can select my own coins for a specific algo ?

TYIA

alanon09

newbie

Activity: 9

Merit: 0

Again a nightmare with a European server equhash? Ping to the server became 54ms as it was before, but in the mainer again 300ms. Using 139.162.138.168 now does not work though the connection goes to this address, admin please help us!

Nooblife

newbie

Activity: 26

Merit: 0

Good morning.

I would appreciate some assistance with my difficulty setting. I am running two Bitmain Antminer L3+ and am interested in mining Verge (XVG).

I am using my name and worker properly. They do show up as active. I am using the following setup:

Myl3.111
Myl3.222 (not real info)

stratum+tcp://hub.miningpoolhub.com:17001

I am not mining anywhere close to estimates from WhatToMine. I know this is an estimator but still it is substantially lower by 25-40%.

Miner 1: Diff 272k Accepted 26 Rejected 00 Discarded 276
Miner 2: Diff 238k Accepted 59 Rejected 00 Discarded 752

TMP Dashboard estimates: 966 MH/s

TMP POOL stats:
966 MH/s 416 XVG estimates

So...what is wrong here? Did I use the wrong stratum? This is ASIC? How do I setup the difficulty to improve outputs?

Thank you in advance
Nooblife.

crushed

member

Activity: 103

Merit: 11

Quote from: zardozer on January 14, 2018, 10:57:47 PM

9) there are sites/tools to help make things easier with this pool

Which sites / tools are you guys using for MPH?
I know mph stats... anything else?

Thanks

A few are:

Awesome Miner
Nemos Miner
MultiPool Miner
mph_switch

You need to figure out if they work for your scenario or not and if you want to invest the time and, in some cases, money.

sir_blacks

jr. member

Activity: 119

Merit: 3

Quote from: cryptoyes on January 15, 2018, 09:41:19 AM

For the EU server, use the IP (don't use the fqdn!): 139.162.138.168 ... you're welcome, I don't want any bitcoins

Anyone knows if ETN is working for auto-switch on cryptonight? Only monero shows a port.

dear one 139.162.138.168 is server what was or is on Germany & what i say it just died or stop working it was not respond at any trace, ping from me or any other site what it can back trace ip ...

now i check agen & it semns it get try be alive high ping replay but at list it not say time out or not been found ...

same whats point have dns like "europe.equihash-hub.miningpoolhub.com" what behind there are 5 server 2 in Japan, 2 in Singapore & 1 on Germany ... my geography, geolocation it fail getting in a infinite loop error or my be europe was moved to Japan Cheesy

& i was not know :p

cryptoyes

member

Activity: 297

Merit: 10

For the EU server, use the IP (don't use the fqdn!): 139.162.138.168 ... you're welcome, I don't want any bitcoins

Anyone knows if ETN is working for auto-switch on cryptonight? Only monero shows a port.

sir_blacks

jr. member

Activity: 119

Merit: 3

Hello

@miningpoolhub can pls in name of all Gods to fix EU server!!!! Huh

what end to be in Japan & Singapore = mining with 300-400 mls is not good & last EU server it sems is stop working aka that one from Germany just died, kaput !!!

Atm for eu ppls is better to mine on US server coz at list it bring ~150 mls so FIX EU server is past around 1 week from when this happen

thx

NoOneLt

member

Activity: 140

Merit: 10

Hey guys, what latency do you have on europe.equihash-hub.miningpoolhub.com?

I need some help troubleshooting, i have ~400 ms ping wit 128 block size, and DSTM shows 400-600, pretty high i'd say, i am in EU and have pretty descent connection, and eu1.ethermine.org pings 30-40 ms.

UPD. Stable now 32-40

drwx101

newbie

Activity: 12

Merit: 0

Quote from: crushed on January 14, 2018, 03:52:47 PM

Quote from: Seb83 on January 14, 2018, 03:05:25 PM

Quote from: crushed on January 14, 2018, 02:56:37 PM

Quote from: drwx101 on January 14, 2018, 11:54:50 AM

Quote from: crushed on January 14, 2018, 11:24:26 AM

Quote from: drwx101 on January 14, 2018, 10:09:03 AM

Quote from: Lordas on January 14, 2018, 09:47:30 AM

ZCL appeared at exchange (my was set to auto).

Good to hear.
I don't know any legit pool that locks up and withholds their customers funds eligible for payout indefinitly for days or weeks and if my funds remain inaccesible and supposedly "stuck sitting on some exchange for days already just depreciating" for much longer I am inclined to believe MHP is just running some fractional scheme with their internal customer wallets.
The complete lack of communication from the admin stinks too with the money they rake in every day you would expect a higher quality service to come with it.

Holy crap, the entitlement is real. If you don't like the way the pool operates, go somewhere else. It really can't get any simpler than that.

If you've got a problem bigger than "My $5 worth of some useless coin hasn't auto exchanged in the last five hours" send the OP a PM with details he will need to solve the problem (txn ids, etc). In my experience, we will get back to you with a resolution. Just not within 10 minutes. This pool isn't for everyone. If you need hand holding, don't understand how this pool works, or have little patience, I would recommend you go to a different pool.

Thats a lot of bullshit you spout there buddy I am not talking about 5 hours or 10 minutes maybe you have a big problem reading and are entitled yourself.
I am just inquiring about customer funds that are eligible for payout being withheld for days and not 10 minutes or 5 hours as you misleadingly try to claim here and whether that is your normal modus operandi towards your customers to withhold your customer funds indefintly, but seeing your dishonest reply it seems it is.

You put a lot of words together there but I don't think you know what all of them mean. Regardless, the pool sends me the requested coin in the correct amounts based on my specified minimum payouts which works out to be daily. It's pretty basic and works well for me at this point in time. Again, see my statement about the pool not being for everyone.

So, because it works for you, everyone else can go f..k themselves, right?

No, just you and the other clown. As I said before, if you have an issue, post/PM/email the Pool Op the problematic transaction ids and what the issue is. If he never gets back to you, move to a different pool. Whining in a forum with vague statements and accusations doesn't help get your problem resolved.

lmao you are the clown here spouting bullshit making excuses for something that obviously doesn't work properly. Already am at other pools don't worry about me kid.

Zikkson

newbie

Activity: 70

Merit: 0

I have autoexchange set to LTC and it works well. But maxcoin is stuck in autoexchnage walle (maybe because i have only 0,01usd in it).

stfN2128

member

Activity: 882

Merit: 14

are there any problems known for autoexchange? set it to verge and no exchange since 2 or 3 days, coins stuck "on exchange"

Rhyn0

newbie

Activity: 11

Merit: 0

Quote from: Martimus on January 15, 2018, 03:28:15 AM

Does your https://miningpoolhubstats.com work? Mine keeps saying: Whoops, looks like something went wrong.

works for me.

Martimus

newbie

Activity: 8

Merit: 0

Does your https://miningpoolhubstats.com work? Mine keeps saying: Whoops, looks like something went wrong.

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 77. (Read 487870 times)