Auto profit switch not working!!!
The data obtained via the api "getminingandprofitsstatistics" and "getautoswitchingandprofitsstatistics" are not relevant!!! PLZ fix it !!!!
Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 74. (Read 487870 times)
January 18, 2018, 02:42:38 PM
January 18, 2018, 01:30:48 PM
My siacoin is stuck and has not been auto exchanged even when both Bittrex and Poloniex were up. It has been 1-2 weeks and I get there is delays but is the coin not exchanging still or what can I do the get it to exchanged to
my selection etherum.
my selection etherum.
Same here. Only way to wait until Bittrex make SC wallet enabled again... It was opened for several hours, moved there and got stuck.
SC has too many problems with their code and network, not the best coin for mining...
Isn't Poloniex Siacoin exchange working? Why can't the coins be exchanged there?
It looks like Bittrex is open and accepting Siacoin per Siacoin reddit. It would be nice to get it exchanged since Siacoin is booming.
https://www.reddit.com/r/siacoin/comments/7ld1ic/siacoin_exchange_issues_megathread/
January 18, 2018, 11:51:50 AM
hi
we are mining zcl at MPH and it looks like auto exchange is confusing, pls clarify
example: when we set auto exchange to ETC , where should we change our wallet address?
shall we change all our payment zcl address to ETC address?
we still don`t know where should we introduce our auto exchange wallet address.
my user id is 254350
pls clarify
Just here...we are mining zcl at MPH and it looks like auto exchange is confusing, pls clarify
example: when we set auto exchange to ETC , where should we change our wallet address?
shall we change all our payment zcl address to ETC address?
we still don`t know where should we introduce our auto exchange wallet address.
my user id is 254350
pls clarify
January 18, 2018, 08:39:00 AM
I did an exchange from DGB to ETH.
For over a day it is showing as
Debit_AE (confirmed) with a Blank Payment Address and has not shown up under my ETH Wallet.
In the past it has take a few hours, now over a day. Does this mean my coins are lost in limbo or is something else going on?
For over a day it is showing as
Debit_AE (confirmed) with a Blank Payment Address and has not shown up under my ETH Wallet.
In the past it has take a few hours, now over a day. Does this mean my coins are lost in limbo or is something else going on?
I had the same problem as you but it just takes a bit longer, it took about a full week for me.
When you manually try to push confirmed coins on the auto-exchange it can take a much longer time to exchange them then regular direct auto-exchanges that arent pushed manually from your balance, so beware of that if you want to push confirmed coins on your balance into auto-exchange to exchange them for another crypto.
Miningpoolhub settles everything eventually so you just have to wait basically, it can take up to one day to about a week to exchange them.
It is something Miningpoolhub might be able to improve in the future to speed up auto-exchange orders that are pushed on the exchange manually but for now it just takes a bit longer sometimes,
however it does work and Miningpoolhub does settle the balances eventually.
I agree with the other users that said no pool is perfect and from all the pools I tested Mininpoolhub is one of the better and reliable ones, I think if Miningpoolhub speeds up manual auto-exchange and limits customer funds getting stuck to a day or so at maximum and not a week and ups their customer support a bit they can really give most other pools a run for their money in terms of speed, functionality, reliability. and availability
I have seen in the past take a day but going on 5 days now. I will wait it out. I stopped mining and moved to TheBlocksFactory for now since I can see my coins piling up at TheBlockFactory but the balances stopped growing at MPH. Seems like there are other issues going on.
January 18, 2018, 07:32:35 AM
please add verge for verge for blake2b for upcomming A2 and also verge-groestl for the X10
we are losing alot a profitablity missing verge
we are losing alot a profitablity missing verge
January 18, 2018, 06:27:53 AM
Anyone knows if ETN is working for auto-switch on cryptonight? Only monero shows a port.
it won't switch, because cryptopia is not one of the three exchanges that pool uses.
January 18, 2018, 04:36:08 AM
I did an exchange from DGB to ETH.
For over a day it is showing as
Debit_AE (confirmed) with a Blank Payment Address and has not shown up under my ETH Wallet.
In the past it has take a few hours, now over a day. Does this mean my coins are lost in limbo or is something else going on?
For over a day it is showing as
Debit_AE (confirmed) with a Blank Payment Address and has not shown up under my ETH Wallet.
In the past it has take a few hours, now over a day. Does this mean my coins are lost in limbo or is something else going on?
I had the same problem as you but it just takes a bit longer, it took about a full week for me.
When you manually try to push confirmed coins on the auto-exchange it can take a much longer time to exchange them then regular direct auto-exchanges that arent pushed manually from your balance, so beware of that if you want to push confirmed coins on your balance into auto-exchange to exchange them for another crypto.
Miningpoolhub settles everything eventually so you just have to wait basically, it can take up to one day to about a week to exchange them.
It is something Miningpoolhub might be able to improve in the future to speed up auto-exchange orders that are pushed on the exchange manually but for now it just takes a bit longer sometimes,
however it does work and Miningpoolhub does settle the balances eventually.
I agree with the other users that said no pool is perfect and from all the pools I tested Mininpoolhub is one of the better and reliable ones, I think if Miningpoolhub speeds up manual auto-exchange and limits customer funds getting stuck to a day or so at maximum and not a week and ups their customer support a bit they can really give most other pools a run for their money in terms of speed, functionality, reliability. and availability
January 17, 2018, 10:50:16 PM
does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms... Is it the server intel patch? or just the servers being overloaded? or ME!!!!??
Nope, not only you.I had steady 43ms for the past two weeks. Left for 4 days; now back and have acceptance times in 2-5-hundreds ms also.
That is on US-East @ BTG and Equihash servers. And I think, Intel patch announcement came later than this happened/changed
Ok thats good to know.. If its a server issue i'm sure it's being worked on and will be fixed sooner than later.
Definitely hope so. I just posted on another error I got today. Might be related, for all I know
January 17, 2018, 10:43:59 PM
I wanted to try today MultiPoolMiner but got not-described error: "Index was out of range. Must be non-negative and less than the size of the collection". Waiting on Github for a possible solution...
So, I tried Multi-algo switch mining (Port 12XXX) different algo coins by using Hub feature,via the hub worker -- Claymore miner @ us-east-equihash-hub.miningpoolhub.com:12023 (SSL/TLS)
and after some time the miner would give first:
"...
Stratum -- reading socket failed 0, disconnect
ZEC: Connection lost, retry in 20 sec...
..."
then, the attempt to connect with the message "ZEC: Stratum -- Connected"
and then
"...
ZEC: Authorization failed
: {"id":2."result":false,"error":null}
..."
Happened few times today. Before, I was mining non-stop BTG (port 20595) for 10 days without a single error (and only 7 rejected shares). So, I am afraid to leave this switching miner on for the night; went back to a single-coin (btg).
Is it me? Or the servers' updates did do some bad service?..
So, I tried Multi-algo switch mining (Port 12XXX) different algo coins by using Hub feature,via the hub worker -- Claymore miner @ us-east-equihash-hub.miningpoolhub.com:12023 (SSL/TLS)
and after some time the miner would give first:
"...
Stratum -- reading socket failed 0, disconnect
ZEC: Connection lost, retry in 20 sec...
..."
then, the attempt to connect with the message "ZEC: Stratum -- Connected"
and then
"...
ZEC: Authorization failed
: {"id":2."result":false,"error":null}
..."
Happened few times today. Before, I was mining non-stop BTG (port 20595) for 10 days without a single error (and only 7 rejected shares). So, I am afraid to leave this switching miner on for the night; went back to a single-coin (btg).
Is it me? Or the servers' updates did do some bad service?..
January 17, 2018, 10:34:19 PM
does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms... Is it the server intel patch? or just the servers being overloaded? or ME!!!!??
Nope, not only you.I had steady 43ms for the past two weeks. Left for 4 days; now back and have acceptance times in 2-5-hundreds ms also.
That is on US-East @ BTG and Equihash servers. And I think, Intel patch announcement came later than this happened/changed
Ok thats good to know.. If its a server issue i'm sure it's being worked on and will be fixed sooner than later.
January 17, 2018, 10:21:15 PM
does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms... Is it the server intel patch? or just the servers being overloaded? or ME!!!!??
Nope, not only you.I had steady 43ms for the past two weeks. Left for 4 days; now back and have acceptance times in 2-5-hundreds ms also.
That is on US-East @ BTG and Equihash servers. And I think, Intel patch announcement came later than this happened/changed
January 17, 2018, 09:39:49 PM
These are IPS of the mining pool servers, check ping for each and choose one that works best for you
europe.equihash-hub.miningpoolhub.com 139.162.138.168
europe.equihash-hub.miningpoolhub.com 172.104.180.119
europe.equihash-hub.miningpoolhub.com 172.104.106.153
europe.equihash-hub.miningpoolhub.com 172.104.127.76
europe.equihash-hub.miningpoolhub.com 139.162.73.35
europe.equihash-hub.miningpoolhub.com 172.104.189.59
That being said, you should probably use fqdn as it will return the fastest server for your area, if I'm not mistaken.
europe.equihash-hub.miningpoolhub.com 139.162.138.168
europe.equihash-hub.miningpoolhub.com 172.104.180.119
europe.equihash-hub.miningpoolhub.com 172.104.106.153
europe.equihash-hub.miningpoolhub.com 172.104.127.76
europe.equihash-hub.miningpoolhub.com 139.162.73.35
europe.equihash-hub.miningpoolhub.com 172.104.189.59
That being said, you should probably use fqdn as it will return the fastest server for your area, if I'm not mistaken.
I'm in Europe, only server under 250ms is 139.162.138.168 at 50ms for me and it's not accepting connections at the moment.
Try us-east.ethash-hub.miningpoolhub.com, it pings ~180ms from where I'm at (East Europe)
I've been using it as a backup, i'm from Western Europe so I get ~100ms, however, I think it's getting hammered because the European servers are all messed, and miners are switching over to the us...
January 17, 2018, 08:46:19 PM
why are we mining siacoin if its not worth anything? I have over 200 siacoin and can't exchange them but really looking up there value is crap not sure why we even mine them.
January 17, 2018, 06:19:26 PM
My siacoin is stuck and has not been auto exchanged even when both Bittrex and Poloniex were up. It has been 1-2 weeks and I get there is delays but is the coin not exchanging still or what can I do the get it to exchanged to
my selection etherum.
my selection etherum.
Same here. Only way to wait until Bittrex make SC wallet enabled again... It was opened for several hours, moved there and got stuck.
SC has too many problems with their code and network, not the best coin for mining...
Isn't Poloniex Siacoin exchange working? Why can't the coins be exchanged there?
January 17, 2018, 06:16:01 PM
Anyone else with coins never reaching your wallet after auto-exchange>?
https://i.imgur.com/EopqDLV.png
https://i.imgur.com/EopqDLV.png
I did an exchange from DGB to ETH.
For over a day it is showing as
Debit_AE (confirmed) with a Blank Payment Address and has not shown up under my ETH Wallet.
In the past it has take a few hours, now over a day. Does this mean my coins are lost in limbo or is something else going on?
For over a day it is showing as
Debit_AE (confirmed) with a Blank Payment Address and has not shown up under my ETH Wallet.
In the past it has take a few hours, now over a day. Does this mean my coins are lost in limbo or is something else going on?
January 17, 2018, 04:34:43 PM
With other pools, I am used to difficulty being based on 2^n formula. Therefore 2^13 = 8192. 2^12 = 4096
Standard format then was name.worker_diffXXXX
I am not sure what d=0.01 or d=0.0001 represents or how I would represent that with this pool for an Antminer.
Is there an Admin here that can solve this?
Nooblife.
Standard format then was name.worker_diffXXXX
I am not sure what d=0.01 or d=0.0001 represents or how I would represent that with this pool for an Antminer.
Is there an Admin here that can solve this?
Nooblife.
If I'm not wrong 0.00x is 1/diff.
So if you want 15000 diff you enter d=0.0000666666666666
January 17, 2018, 03:50:55 PM
does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms... Is it the server intel patch? or just the servers being overloaded? or ME!!!!??
January 17, 2018, 03:18:08 PM
Hello,
Dash lowered the transaction fees by 10x with their new version. Will you lower dash withdrawal fees too?
Dash lowered the transaction fees by 10x with their new version. Will you lower dash withdrawal fees too?
January 17, 2018, 12:48:48 PM
With other pools, I am used to difficulty being based on 2^n formula. Therefore 2^13 = 8192. 2^12 = 4096
Standard format then was name.worker_diffXXXX
I am not sure what d=0.01 or d=0.0001 represents or how I would represent that with this pool for an Antminer.
Is there an Admin here that can solve this?
Nooblife.
Standard format then was name.worker_diffXXXX
I am not sure what d=0.01 or d=0.0001 represents or how I would represent that with this pool for an Antminer.
Is there an Admin here that can solve this?
Nooblife.
January 17, 2018, 02:32:35 AM
Can you please give an example.
Noob.555_diff8192?
Like this?
No. You put the difficulty setting in the password field of config settings/file for your miner. Like this:
SuperMiner --server us-east.equihash-hub.miningpoolhub.com --port 17023 --user whatever --pass d=0.01
I don't know on port 17023 but I tested this command on europe.equihash-hub.miningpoolhub.com ports 20570, 20575, 20594 & 20595
It is not working, you can use d=0.1 or 0.00001 or what you want, it always start at 4095H diff.
Jump to: