us-east.equihash-hub.miningpoolhub.com
Please help
Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 73. (Read 487870 times)
January 19, 2018, 07:24:28 PM
ping is messed up...use to get steady 52/53 ms now getting 200+ms since past couple days...whats going on here?
us-east.equihash-hub.miningpoolhub.com
Please help
us-east.equihash-hub.miningpoolhub.com
Please help
January 19, 2018, 06:51:24 PM
does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms... Is it the server intel patch? or just the servers being overloaded? or ME!!!!??
Nope, not only you.I had steady 43ms for the past two weeks. Left for 4 days; now back and have acceptance times in 2-5-hundreds ms also.
That is on US-East @ BTG and Equihash servers. And I think, Intel patch announcement came later than this happened/changed
Ok thats good to know.. If its a server issue i'm sure it's being worked on and will be fixed sooner than later.
16437 ms!
WOW!!!
January 19, 2018, 03:55:52 PM
The pool only reports effective hashrate there's usual some difference, sometimes it's lower, sometimes it's higher. Best way is to look at earnings per 24h not hashrates.
January 19, 2018, 03:48:17 PM
Double check if you have everything setup correctly on the mining software, 20 mins is usually more than enough to see an update on the dashboard/worker status.
I changed to the other server url and now its working - hashrate is low compared to what smos is reporting - 3050 avg in smos vs 2350 on mph
January 19, 2018, 03:32:25 PM
Double check if you have everything setup correctly on the mining software, 20 mins is usually more than enough to see an update on the dashboard/worker status.
January 19, 2018, 03:09:22 PM
You don't need to create the worker as the pool will do it automatically but that can take a lot of time, however your shares are still counted towards your balance. But you can manually create your workers (I did) and usually within a few minutes you get hashrate/shares info.
Waited about 20 minutes and nothing is showing up. No hashrate in dashboard and in worker it's marked X in active.
?? January 19, 2018, 02:55:56 PM
Dear fellow ethos amd mph users 
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
I added other algos to the sgminer.stub.conf and it kind of worked, but the problem is wherever the pool changes the algo/coin the miner restarts, and the GPU powertune level resets to 7. That made the cards overheat and throttle, and honestly I didn't see much gain in profitability, since it made the miner overheat, you also have a small 0.2% fee for exchange and ethash/ethereum is the most profitable anyway... So I just went back to mining only ETH and ocassionaly ETC.
Managing powertune levels and temps via miner is not recommended in ethos, it messes with their fan control etc.
January 19, 2018, 02:38:29 PM
You don't need to create the worker as the pool will do it automatically but that can take a lot of time, however your shares are still counted towards your balance. But you can manually create your workers (I did) and usually within a few minutes you get hashrate/shares info.
January 19, 2018, 02:15:08 PM
I'm new to miningpoolhub and just wanted to simply mine one coin zcl. So I created an account and went to the zcl pool and added a wallet address. I'm mining with SMOS so I followed their config settings:
--server us-east.zclassic.miningpoolhub.com --port 20570 --user account(i filled in my account name).$rigName --pass x
Switched my rig to this mining group in smos which connected to miningpoolhub and started mining.
In miningpoolhub it says no need to create a worker? I guess if my user account matches it will create one?
I did this and waited a few minutes but saw nothing - no worker, no hashrate, no balance or credits.
What didn't I do right here?
--server us-east.zclassic.miningpoolhub.com --port 20570 --user account(i filled in my account name).$rigName --pass x
Switched my rig to this mining group in smos which connected to miningpoolhub and started mining.
In miningpoolhub it says no need to create a worker? I guess if my user account matches it will create one?
I did this and waited a few minutes but saw nothing - no worker, no hashrate, no balance or credits.
What didn't I do right here?
January 19, 2018, 01:18:59 PM
@miningpoolhub
Trying to get litecoin exchanged to Ethereum, it just sits on the Auto Exchange wallet indefinitely. Other coins go through just fine...
Any news on fixing the european hub servers resolving to IP's with over 250+ ms from Europe?
Trying to get litecoin exchanged to Ethereum, it just sits on the Auto Exchange wallet indefinitely. Other coins go through just fine...
Any news on fixing the european hub servers resolving to IP's with over 250+ ms from Europe?
January 19, 2018, 12:40:08 PM
What about Electroneum pool? I have no connection.
January 19, 2018, 08:58:05 AM
WHAT THE HELL IS HAPPENED TO THE Auto Exchange!!!! 
January 19, 2018, 07:23:45 AM
why the Share accepted time increased?
on claymore 10.5 with ETH mining
Share accepted (94 ms) message became Share accepted (375 ms)
thanks,
Mego
on claymore 10.5 with ETH mining
Share accepted (94 ms) message became Share accepted (375 ms)
thanks,
Mego
January 19, 2018, 07:17:16 AM
Dear fellow ethos amd mph users
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
I wrote a small application which toggles algoritm API-based miningpoolhub. Unable to share - write to the PM.
Link to github?
I don't want to hand out free everyone its work.
Give a couple of people for tests. Then either I will sell or will include Commission.
LOL...good luck with that
January 19, 2018, 07:02:51 AM
Dear fellow ethos amd mph users
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
I wrote a small application which toggles algoritm API-based miningpoolhub. Unable to share - write to the PM.
Link to github?
I don't want to hand out free everyone its work.
Give a couple of people for tests. Then either I will sell or will include Commission.
January 19, 2018, 03:55:44 AM
Dear fellow ethos amd mph users
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
I wrote a small application which toggles algoritm API-based miningpoolhub. Unable to share - write to the PM.
Link to github?
January 19, 2018, 01:01:05 AM
does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms... Is it the server intel patch? or just the servers being overloaded? or ME!!!!??
Also now ping 250-300ms (last 2-3 days), before was 35-50ms. That happened?Cryptonight algo.
January 18, 2018, 10:51:03 PM
Dear fellow ethos amd mph users
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
Do any of you managed to use multi-algo switch on ethos using AMD cards (12XXX ports I guess?)? I would really appreciate local.conf, sgminer.stub.conf examples and if necessary MPH website settings. I am beating my brains out but I could only managed to use multi-coin single algo on MPH (17XXX ports) :S
I wrote a small application which toggles algoritm API-based miningpoolhub. Unable to share - write to the PM.
January 18, 2018, 10:04:01 PM
I don't understand, when I lower voltage, my I/s falls from 168 to 147 and Sol/s falls from 315 to 275, but my Shares per second, for what I receive payment, don't change. Does it mean that difficulty of share also vary and I will get less money or not? Is hashrate more valuable than shares per second?
If difficulty can go lower to accommodate your lower hash rate then it will do so. There is a limit of how low a difficulty can go, set by the pool. But yes hash rate is more important as youre solving bigger pieces.
January 18, 2018, 03:30:42 PM
I don't understand, when I lower voltage, my I/s falls from 168 to 147 and Sol/s falls from 315 to 275, but my Shares per second, for what I receive payment, don't change. Does it mean that difficulty of share also vary and I will get less money or not? Is hashrate more valuable than shares per second?
Jump to: