Topic: [ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins - page 72. (Read 57735 times)

Hi, can you write settings for asic's? need for test some d3.

Do you mean Bitcaps?

Thanks pinpins!

Any word on new coin support?  Ninja, etc...?  How about BCTP?

UPDATE

1. Everyone who experienced connection problems. It took for me 48 hours for RCA.(root cause analyses).  Conclusion is that it is either DDoS protection or backend stratum problems.
2. First of all I have introduced second endpoint located in Europe europe.mine.zergpool.com. If you are in Europe you can mine there for better latency, and also as backup in case mine.zergpool.com acting up.
3. If you hit stratum_subscribe issue, please take a 2 screenshots one against US server and EU servers at the same time period (2-3 mins) and send it to me, that would be really appreciated in order to prove DDoS protection aggressiveness.
4. Nevertheless I did many TCP tweaks to improve situation on backend also. Don't know if this will help going forward, please let me know if it is again acting up. But then it is important to get that proof doing screenshots.

Thank you for your support !
pinpin

No, we cannot change them yet, just holding. Yesterday Cryptopia promised to get it back online, they still didn't. So need to watch out situation

http://zergpool.com is only mining Lux on Phi1612. So, yeah: is autotrading active?

The algo is active on some pools but for other coins.  Not on AH due to the cryptopia issue.

I was asking the pool operator

Hi, sorry but what is LUX ? and what means "cryptopia had disabled it" ?

i start mining x11 whiteout a specific coin. In the list of coin i mined there was also Magnet. So i change it and mined dirctly the Magnet MAG coin because is was on top of the profitably column and was not signed in red.

 

Is autotrading for LUX activated? I thought cryptopia had disabled it??

Hi, i mining about 24 hour for Magnet (MAG) coin on zergpool. The  estimated average time to find a block at full pool speed is about 2 hour. Bit if i got to http://www.zergpool.com/site/block?id=2366 there no blocks listed.
Is that correct ? Can it be that no block will be found within 24 hour for that coin?

Do i something wrong ?

thanks in advance.

Coming from awesomeminer on MPH , gonna give zerg a try.... making sure I got my settings correct.

 I wanna autoexchange for LTC. My LTC address is MNvbDu2vUfZZGHqWmxqP3HprfkEXBkvXHR

I put my address in awesomeminer profitswitching zergpool bitcoin address. Is this correct even though I want LTC?

I did put the online services password to c=LTC

thanks in advance.

Hello Pinpins,

Could you take another look at this one when you get a moment? If you could push payout, that'd be splendid, I imagine the drop in balance was related to it thinking it'd go to exchanges, but this was just a straight mine.

Thanks!

It means that pool administrator should care more about what happens with mined coins ?

All that matters is the amount received in 24h or 48h and something happened with mined coins that was not sent to exchange.

Very easy to notice when something happened with your coins is when you check 24h balance and yellow line with pending has a sudden drop without an increase in blue "balance" line. This means my conins vanished and was removed form the database because of various reasons the pool administrator knows very well.

I recently moved a part of my rigs from another pool to your pool and you noticed that the number of miners increased by 50% from 1k to 1,5k in the last few days.

Also because Patrike from Awesome Miner included Zerg pool into default configuration of AwesomeMiner it is a very big responsibility for you and a very big opportunity at the same time, all you have to take care is to maintain the highest profitability when compared with other pools like AhashPool or Zpool.

Stability and high profitability of ZergPool should be top priority for you and what happens with the coins and the exchanges you use are very important also.

Best regards to you all.

If you had hundreds of rigs as you say (which I doubt, considering the level of noobishness you're displaying), you'd know there are many factors to consider (pool luck, different coins, too short observation time etc) which you haven't even thought of.

Accusing people of scamming because you compared apples to oranges for a short amount of time is laughable at best.

Than how do you explain that a different pool with 1% fee for mining and also 6% fee for Exchange is 10% more profitable on BTC payments than your pool ?

Are you altering the database values and skimming 17% of the amounts from the payments in BTC ?

It is mandatory that everyone should test for 24 hours this pool and a different pool and use the pool that has the highest BTC payments after 24 hours, because I ca not explain how is this possible to have such a difference in paid amount.

I have hundreds of RIGs and if the amount invested to buy the GPUs is huge and I want the pools to be fair and only the pools with the highest payments to be used, and the pools that are not well maintained and with poor performance not to be used anymore by miners because the pools that steal from the miners should know that if we do simple tests to benchmark performance we can know very easy wich pool is better and every miner should do the same.

Sorry you earned a lot and protection from too high payments worked. I have processed payment now

if it all makes you more comfortable, I have nothing to hide

define('YAAMP_FEES_MINING', 0);
define('YAAMP_FEES_EXCHANGE', 0);
define('YAAMP_FEES_RENTING', 0);
define('YAAMP_PAYMENTS_FREQ', 12*60*60);
define('YAAMP_PAYMENTS_MINI', 0.01);

I advise you all use 2 identical rigs with identical settings, one with zergpool and the other with another pool selected and use 2 separate payout addresses and see what pool has more BTC after 24 hours and you can see if zergpool 0% fee is a lie or not.  (real values for define('"'"'YAAMP_FEES_MINING'"'"', 0.5); define('"'"'YAAMP_FEES_EXCHANGE'"'"', 2); )

The owner refused to tell us the real fee values he configured and I did some tests that proved he is misleading us and the amounts from zergpool in BTC are not as good as I hoped.

All that matters is the real BTC payments after 24 or 48 hours. If we all do tests, we are avoiding loosing money. Besides the fee that is shown it matters the value for the fee that is configured for exchange and it is very high compared to other pools.

My tests proved 10% lower performance on zergpool compared to other better performing pools and this means the configured exchange fee is 10% instead of 0% and also that pool is not managed correctly to exchange the coins and you end by mining and receiving ZERO for rigs that you invested your money to buy the GPUs.

I own hundreds of RIGs and the most important thing is how pool is administrating the pool that I use the most profitable pool.

So, until we hear an official response from pool administrator, pinpins and some explanations from him about why pool performance on real tests with comparison of identical rigs on BTC real payments, I do advise you all do the tests as I advised if you want to maximize your return of your investment in GPUs.  


Best wishes.

Got an extra 200 GH/s of x11 I'll point your way.

Hope for good reports. Will update the thread after I trial it for a while.
Comparing to zpool.ca right now, pulling ~.25 LTC a day

Thanks!