[ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins - page 9.

JayDDee

full member

Activity: 1372

Merit: 216

Quote from: pinpins on January 11, 2020, 07:13:32 AM

if default startdiff is too high you can explore sd= setting to customize it for you.

I have also reduced default start diff on this algo too.

Vardiff is working much better on many algos now, even CPU mining of GPU algos,
no need for d= or sd= anymore. Thanks.

joblo

legendary

Activity: 1470

Merit: 1114

An FYI for those that noticed the addition of scryptn2 to the pool.

scryptn2 is just scrypt with N = 1024**2 and has been available in cpuminer-opt for a long time:

Code:

cpuminer -a scrypt:1048576 -o ...

MrPlus

member

Activity: 514

Merit: 11

Released NPlusMiner 6.1.10
https://github.com/MrPlusGH/NPlusMiner/releases

Last Release:

Discord: https://discord.gg/2BCqPxe

NPlusMiner with AI, GUI, AutoUpdate, Earnings Tracker and Monitoring

Candidate for AutoUpdate = Yes
- NPlusMiner checks for updates every 24 hours.
- If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

ChangeLog

- Added scryptn2 support (Verium)

++++++
Discord
https://discord.gg/2BCqPxe
BitCoinTalk
https://bitcointalksearch.org/topic/nplusminer-multirig-remote-managementaiautoupdatepoolalgo-switching-2965976

Avadon

newbie

Activity: 41

Merit: 0

Documentchain (DMS) not mined by the video card fix it in yourselves

pinpins

member

Activity: 1022

Merit: 19

UPDATE

1. Updated first bitcointalk post in Zergpool thread.

2. Summarizing all features we currently support below

Detailed features description

Autoexchange to any coin we mine at pool
Stratum endpoints in Japan, Singapore, London, Virginia, Texas-Dallas, Amsterdam, Miami, California, Los-Angeles
Anycast network - you use one URL, and optimal network is selected automatically based on your location
Guaranteed payouts to BTC, LTC, DASH, BCH, DOGE currencies
Payouts in any currency we mine, but please watch pool mines enough blocks of desired coin
More than 250 coins
More than 70 algorithms
Profit switching or target/specific coin mining
0.5% fee
Frequent payouts for balance above 0.0025 BTC, above 0.15 LTC
Personalized payout balance levels
Solo and Party mode for mining
Mining command line generator
Merged mining extra reward benefits
Configurable Web interface for better monitoring
Support of old ASIC hardware with lower difficulties(read section Difficulty configuration on front page)
Supported by many popular of crypto software and services - Awesome Miner, NPlusMiner, MinerStat, Google and IoS monitoring apps and more.

pinpins

member

Activity: 1022

Merit: 19

Update

1. We are now supporting low difficulty miners (with difficulty 10x less than starting). To run old hardware and start it at lower difficulty you must utilize sd= parameter in password. (Example, scrypt default start diff is 80000, you can old HW on it, by specifying sd=8000 in password)

Avadon

newbie

Activity: 41

Merit: 0

How to get a coin video card Documentchain??

pinpins

member

Activity: 1022

Merit: 19

UPDATE

1. Safex (SFX) deposits are finally opened, so autoexchange is working again
2. Some minor improvements for web GUI have been conducted: faster loading, plus pager to have access for more of found blocks history and wallet earnings.
3. You can now reduce amount of rows in miner Web GUI section, you can use formulas in filter fields(>0, <0, or by characters)
4. New coin - Streamies at skunk algo
5. New coin $BSHA3 and sha3d algo, for GPU / FPGA mining
6. New coin $AEON at k12 algo
7. New coin $TRTL at argon2d-chukwa variant, refer to "chukwa" algo at zergpool.com
8. New coin $BLOC at cryptonight_haven algo.

Reminding our guaranteed payout coins are BTC, LTC, BCH, DOGE, DASH.

cheers, pinpin

MrPlus

member

Activity: 514

Merit: 11

Released NPlusMiner 6.1.9
https://github.com/MrPlusGH/NPlusMiner/releases

Last Release:

Discord: https://discord.gg/2BCqPxe

NPlusMiner with AI, GUI, AutoUpdate, Earnings Tracker and Monitoring

Candidate for AutoUpdate = Yes
- NPlusMiner checks for updates every 24 hours.
- If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

ChangeLog

- Added sha3d support
- Added Cuckaroom support
- Added Eaglesong support
- Fixed NiceHash Estimations

++++++
Discord
https://discord.gg/2BCqPxe
BitCoinTalk
https://bitcointalksearch.org/topic/nplusminer-multirig-remote-managementaiautoupdatepoolalgo-switching-2965976

hammerxp

jr. member

Activity: 71

Merit: 4

Update AlgoMiner to v0.27
- Added display of accepted-rejected shares in the main algorithms window
- Added algorithms for the pool zergpool (cn_saber, cn_gpu, cn_conceal, chukwa)
- Updated miners.

https://bitcointalksearch.org/topic/algominer-automatic-mining-3452243

SPQRCoin

legendary

Activity: 2380

Merit: 1132

There is a promising TDC - True Decentralized Coin. Don't want to add it to your pool? It has a unique mining lyra2TDC algorithm, which is currently mining only for CPU and nVidia based GPU. In this case, you will be the first.
Topic - https://bitcointalksearch.org/topic/tdc-5214033
Developer - https://bitcointalksearch.org/user/neiros-21182
Discord TDC channel - https://discord.gg/Wmp3fmT

joblo

legendary

Activity: 1470

Merit: 1114

Thanks for responding.

The values depend on the algo. My interests are in algos that can be mined with a
reasonable CPU, which is almost anything.

Like I said the starting diff is not the problem for CPUs if vardiff can lower it to
a reasonable level (3 shares/min seems appropriate). There doesn't need to be an absolute
minimum as long as vardiff is in control.

Currently vardiff will only adjust down by one step resulting in a share time of several
minutes on many algos even with a 16 thread CPU. It also affects some smaller GPUs.

If vardiff had a wider range it would reduce the need for manual setting with "d=" or "sd=".

pinpins

member

Activity: 1022

Merit: 19

Quote from: joblo on January 11, 2020, 09:28:20 PM

Quote from: pinpins on January 11, 2020, 07:13:32 AM

Quote from: somaton on January 11, 2020, 05:17:29 AM

And again same story like before - crazy high difficulty and ignoring miner settings -> timeouts every few shares because of crazy high difficulty. Why you always trying to break something that is working fine? There is less then 1000 miners and not 2000 miners like it was few weeks ago and it was working fine just week ago...talking about x21s.

if default startdiff is too high you can explore sd= setting to customize it for you.

I have also reduced default start diff on this algo too.

Start diff is not the problem, minimum diff is.

What would the value your mining HW would cope with? I will fine tune

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: pinpins on January 11, 2020, 07:13:32 AM

Quote from: somaton on January 11, 2020, 05:17:29 AM

And again same story like before - crazy high difficulty and ignoring miner settings -> timeouts every few shares because of crazy high difficulty. Why you always trying to break something that is working fine? There is less then 1000 miners and not 2000 miners like it was few weeks ago and it was working fine just week ago...talking about x21s.

if default startdiff is too high you can explore sd= setting to customize it for you.

I have also reduced default start diff on this algo too.

Start diff is not the problem, minimum diff is.

Gromran

newbie

Activity: 6

Merit: 5

I have a problem with the -p parameter (in Awesome Miner)
It works on a NVidia test system (ccminer)
On an AMD rig (Claymore NeoScrypt) this is not accepted at the pool, possibly because it is not -p but rather -psw with Claymore.
How do I get this done?

antminerguruguy

newbie

Activity: 328

Merit: 0

Quote from: pinpins on January 11, 2020, 07:13:32 AM

Quote from: somaton on January 11, 2020, 05:17:29 AM

And again same story like before - crazy high difficulty and ignoring miner settings -> timeouts every few shares because of crazy high difficulty. Why you always trying to break something that is working fine? There is less then 1000 miners and not 2000 miners like it was few weeks ago and it was working fine just week ago...talking about x21s.

if default startdiff is too high you can explore sd= setting to customize it for you.

I have also reduced default start diff on this algo too.

pinpin you ever find me that litecoin block you owe me?

pinpins

member

Activity: 1022

Merit: 19

Quote from: somaton on January 11, 2020, 05:17:29 AM

And again same story like before - crazy high difficulty and ignoring miner settings -> timeouts every few shares because of crazy high difficulty. Why you always trying to break something that is working fine? There is less then 1000 miners and not 2000 miners like it was few weeks ago and it was working fine just week ago...talking about x21s.

if default startdiff is too high you can explore sd= setting to customize it for you.

I have also reduced default start diff on this algo too.

somaton

jr. member

Activity: 204

Merit: 5

And again same story like before - crazy high difficulty and ignoring miner settings -> timeouts every few shares because of crazy high difficulty. Why you always trying to break something that is working fine? There is less then 1000 miners and not 2000 miners like it was few weeks ago and it was working fine just week ago...talking about x21s.

MrPlus

member

Activity: 514

Merit: 11

Released NPlusMiner 6.1.7
https://github.com/MrPlusGH/NPlusMiner/releases

Last Release:

Discord: https://discord.gg/2BCqPxe

NPlusMiner with AI, GUI, AutoUpdate, Earnings Tracker and Monitoring

Candidate for AutoUpdate = Yes
- NPlusMiner checks for updates every 24 hours.
- If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

ChangeLog

- Added RandomARQ support (CPU / NVIDIA / AMD)
- Added Cryptonight_UPX support (CPU / NVIDIA)

++++++
Discord
https://discord.gg/2BCqPxe
BitCoinTalk
https://bitcointalksearch.org/topic/nplusminer-multirig-remote-managementaiautoupdatepoolalgo-switching-2965976

pinpins

member

Activity: 1022

Merit: 19

UPDATE

1. Happy new 2020 year! hope it will be a good one!

2. Conceal coin at cryptonight_conceal algo was added
3. Safex coin at randomSFX algo was added
4. Masari coin at cryptonight_fast algo was added
5. Haven coin at cryptonight_haven algo was added
6. Nibion Cash coin at cryptonight_heavy algo was added
7. X-cash coin cryptonight_xcash algo was added
8. BitTube coin cryptonight_saber algo was added

Topic: [ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins - page 9. (Read 57342 times)