Topic: [ANN][ROI] ROI Coin | CPU Only Solo Mining Hybrid | 15% POS | 593% Term Deposit - page 171. (Read 107976 times)
November 07, 2017, 12:19:45 PM
First payments sent out, the minimum payment is 20 now. this will be adjusted later to a good value!
November 07, 2017, 12:03:56 PM
Obtain using a computer usually is nonsense! We need a farm. You will pay more for electricity.
November 07, 2017, 11:58:48 AM
i made a pool: http://coinspool.cu.cc/info_roicoin
cpu miner (not compiled by me!):
Windows binary: https[Suspicious link removed]
Source: https://github.com/Optiminer/hodlminer-wolf
pool is not fully tested, block diff to high...
cpu miner (not compiled by me!):
Windows binary: https[Suspicious link removed]
Source: https://github.com/Optiminer/hodlminer-wolf
pool is not fully tested, block diff to high...
Can anyone confirm that they are successfully using the mining pool?
Yes edit this line to mine
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u RJsFF8fgC7QVYvVSa93x8J2VhTtiS1mtwz -p x -t 4 -q -D
your wallet key and -t for threads
Use this miner its faster than the old one http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Is there any way to set up the diff ? or higher diff port?
THanks
hello there is only one port to define the difficulty of the POOL?
November 07, 2017, 11:54:51 AM
Minimum payment10000 this is insane min payout on that pool
November 07, 2017, 11:18:10 AM
I tried solo mining using the wallet where I got hash rate of 40-45 hps for some reason so then I switched to using the HODL miner with the pool which took my hashrate to 170-180 hps, now here is my problem:
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
Put a space after 2 and -u
There is a space between those 2. The same exact command works well on the other, supposedly newer version. Also if I change 3 back to 4, it again works perfectly fine.
I could do that (not in front of the machine right now) but there should be some reason as well - more like a root cause?
November 07, 2017, 11:09:14 AM
hodlminer linux
git https://github.com/Optiminer/hodlminer-wolf
download:
https://yadi.sk/d/7dn9amsD3PVGRU
git https://github.com/Optiminer/hodlminer-wolf
download:
https://yadi.sk/d/7dn9amsD3PVGRU
November 07, 2017, 11:04:56 AM
I tried solo mining using the wallet where I got hash rate of 40-45 hps for some reason so then I switched to using the HODL miner with the pool which took my hashrate to 170-180 hps, now here is my problem:
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
Put a space after 2 and -u
There is a space between those 2. The same exact command works well on the other, supposedly newer version. Also if I change 3 back to 4, it again works perfectly fine.
I could do that (not in front of the machine right now) but there should be some reason as well - more like a root cause?
November 07, 2017, 10:49:34 AM
I tried solo mining using the wallet where I got hash rate of 40-45 hps for some reason so then I switched to using the HODL miner with the pool which took my hashrate to 170-180 hps, now here is my problem:
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
Put a space after 2 and -u
There is a space between those 2. The same exact command works well on the other, supposedly newer version. Also if I change 3 back to 4, it again works perfectly fine.
November 07, 2017, 10:49:21 AM
Great looking project just sent pm..
Started mining or old pc has cheap has gonna move other gpus over.
Is it best to solo or pool atm
Started mining or old pc has cheap has gonna move other gpus over.
Is it best to solo or pool atm
It's up to you if you have enough hash you can get blocks solo mining right from the wallet with one mouse click. If not you can always pool mine for sure. Pool can be checked out here http://coinspool.cu.cc/info_roicoin
On your PM here I sure don't have even 1 ROI coin for sale however you are very welcome to go make a coin buy request at the community marketplace which is here: https://roi-coin.com/forum/topic/3
You could also wait for the faucets to start running or do a needed contribution of rendered service(s) for the coin to obtain a bounty reward
November 07, 2017, 10:47:57 AM
I tried solo mining using the wallet where I got hash rate of 40-45 hps for some reason so then I switched to using the HODL miner with the pool which took my hashrate to 170-180 hps, now here is my problem:
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
Put a space after 2 and -u
There is a space between those 2. The same exact command works well on the other, supposedly newer version. Also if I change 3 back to 4, it again works perfectly fine.
November 07, 2017, 10:42:49 AM
Great looking project just sent pm..
Started mining or old pc has cheap has gonna move other gpus over.
Is it best to solo or pool atm
Started mining or old pc has cheap has gonna move other gpus over.
Is it best to solo or pool atm
November 07, 2017, 10:40:29 AM
I tried solo mining using the wallet where I got hash rate of 40-45 hps for some reason so then I switched to using the HODL miner with the pool which took my hashrate to 170-180 hps, now here is my problem:
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
Put a space after 2 and -u
November 07, 2017, 10:39:42 AM
Im in took me a day to find you guys. Fair start. nice wallet active dev. look nice to me. Can i buy your coins pm me? Fish
Awesome! Just noticed your coin purchase post at the website community marketplace https://roi-coin.com/forum/topic/3
Got your PM here and I think you can bump up your mining hash nicely. Please try adding the flag -optimineraes to the startup .exe icon. Right click the .exe startup icon, click on properties and at the end of the existing text in the target box put one space and add the flag. Check your hash before and after the flag to verify it helps.
November 07, 2017, 10:34:02 AM
Wanted to share a couple of items this morning but first off a huge thanks goes out to the community and it's awesome to see the fast pace of this coin at launch with people solo mining, pool mining and ongoing questions and discussions here in this thread. We've also had positive activity at Facebook, Twitter, YouTube and the website!
We've added another seed node in Bangalore India and several more will be online very soon to make sure we don't have any issues with connections and blockchain synchronization.
The 1st block explorer is up and running and many thanks to OldCoinGuru for taking care of that and his bounty of 100,000 ROI coins have already been paid out and he's also working up a faucet for ROI coin. You can find the block explorer at http://blockexplorer.roi-coin.com We will be adding one or two more block explorers in the very near future.
We've decided on initially listing on 5 exchanges: Yobit with a faucet there, Trade Satoshi, CoinsMarkets, Southxchange, KUcoin.
Spotted a little write up on ROI at Steemit and you can view it here: https://steemit.com/cryptocurrency/@phash/roicoin-howto-mine-to-localnetwork
Spotted a little write up on ROI in Russian language and you can view it here: https://golos.io/ru--novaya/@georgu/kriptovalyuta-roi-algo-hodl
We've added another seed node in Bangalore India and several more will be online very soon to make sure we don't have any issues with connections and blockchain synchronization.
The 1st block explorer is up and running and many thanks to OldCoinGuru for taking care of that and his bounty of 100,000 ROI coins have already been paid out and he's also working up a faucet for ROI coin. You can find the block explorer at http://blockexplorer.roi-coin.com We will be adding one or two more block explorers in the very near future.
We've decided on initially listing on 5 exchanges: Yobit with a faucet there, Trade Satoshi, CoinsMarkets, Southxchange, KUcoin.
Spotted a little write up on ROI at Steemit and you can view it here: https://steemit.com/cryptocurrency/@phash/roicoin-howto-mine-to-localnetwork
Spotted a little write up on ROI in Russian language and you can view it here: https://golos.io/ru--novaya/@georgu/kriptovalyuta-roi-algo-hodl
November 07, 2017, 10:31:32 AM
I tried solo mining using the wallet where I got hash rate of 40-45 hps for some reason so then I switched to using the HODL miner with the pool which took my hashrate to 170-180 hps, now here is my problem:
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
When I use all 4 threads with https://github.com/madzebra/hodlminer-binary/raw/master/hodlminer.exe, it takes 100% of CPU and my Windows crashes so I tried using only 3 threads, so that it remains stable, with the following parameters:
hodlminer.exe -o stratum+tcp://coinspool.cu.cc:3042 -u mywalletaddress -p x -t 3 -q -D
When I do this the miner window closes after a few seconds however the same parameters are working fine with this version of the miner (which gives a lower hashrate): http://cryptomining-blog.com/wp-content/download/hodlminer-wolf-2.zip
Any thoughts why that is happening?
November 07, 2017, 10:31:20 AM
Im in took me a day to find you guys. Fair start. nice wallet active dev. look nice to me. Can i buy your coins pm me? Fish
November 07, 2017, 10:17:39 AM
this coin really takes very very long time to mature....
Yes agreed as in 360 blocks or approximately 12 hours. That parameter coupled with the MIDAS will hopefully keep the blockchain nice and healthy...
November 07, 2017, 10:15:52 AM
Is there a way to see the number of coins that have been deposited, and for the length of time, across all users?
Nothing like that at this time but that would be an interesting idea!
November 07, 2017, 09:52:06 AM
no one on the pool earned a single ROI yet?
Not yet. I have been mining since yesterday when the pool started. My hash rate is 75h/s.
November 07, 2017, 09:32:27 AM
this coin really takes very very long time to mature....
Jump to: