How to cancel the freaking staking?It can't be transfered.
It will get staked, it takes just a very long time because of low network activity. Mine took something like 3 hours
Topic: [ANN]ROM - X11-POS ONLY. 15M - ANON WEBSITE: http://anon.romancryptocoin.info/ - page 25. (Read 48158 times)
June 02, 2014, 04:16:44 AM
It will get staked, it takes just a very long time because of low network activity. Mine took something like 3 hours
June 02, 2014, 04:07:43 AM
How to cancel the freaking staking?It can't be transfered.
June 02, 2014, 03:50:39 AM
For windows 8.1 64-bit new wallet is not syncing is there any solution for this
June 02, 2014, 03:40:25 AM
For wallet testing on OSX I use the following config:
irc=1
server=0
listen=1
checklevel=2
txindex=1
staking=0
I leave staking disabled until fully synced.
I do the following:
Copy Vericoin data dir to Vericoin.bak
CD into Vericoin & delete everything.
Create the romaincoin.conf with what I have above.
Run the wallet & let it sync.
Close the wallet & copy your old wallet.dat over
Run Romancoin-Qt -salvagewallet & let that complete
Close wallet
Edit romancoin.conf & change staking=0 to staking=1 & save
Re-open, verify end results.
pcmerc~
http://pool.kryptochaos.com
irc=1
server=0
listen=1
checklevel=2
txindex=1
staking=0
I leave staking disabled until fully synced.
I do the following:
Copy Vericoin data dir to Vericoin.bak
CD into Vericoin & delete everything.
Create the romaincoin.conf with what I have above.
Run the wallet & let it sync.
Close the wallet & copy your old wallet.dat over
Run Romancoin-Qt -salvagewallet & let that complete
Close wallet
Edit romancoin.conf & change staking=0 to staking=1 & save
Re-open, verify end results.
pcmerc~
http://pool.kryptochaos.com
This is the right tutorial syncing the wallet , thank you for the support. Now we need bigger exchange listing the Romancoin and everithing would be nice..
June 02, 2014, 03:15:20 AM
For wallet testing on OSX I use the following config:
irc=1
server=0
listen=1
checklevel=2
txindex=1
staking=0
I leave staking disabled until fully synced.
I do the following:
Copy Vericoin data dir to Vericoin.bak
CD into Vericoin & delete everything.
Create the romaincoin.conf with what I have above.
Run the wallet & let it sync.
Close the wallet & copy your old wallet.dat over
Run Romancoin-Qt -salvagewallet & let that complete
Close wallet
Edit romancoin.conf & change staking=0 to staking=1 & save
Re-open, verify end results.
pcmerc~
http://pool.kryptochaos.com
irc=1
server=0
listen=1
checklevel=2
txindex=1
staking=0
I leave staking disabled until fully synced.
I do the following:
Copy Vericoin data dir to Vericoin.bak
CD into Vericoin & delete everything.
Create the romaincoin.conf with what I have above.
Run the wallet & let it sync.
Close the wallet & copy your old wallet.dat over
Run Romancoin-Qt -salvagewallet & let that complete
Close wallet
Edit romancoin.conf & change staking=0 to staking=1 & save
Re-open, verify end results.
pcmerc~
http://pool.kryptochaos.com
This is the right tutorial syncing the wallet , thank you for the support. Now we need bigger exchange listing the Romancoin and everithing would be nice..
IS now the wallet working or not? As i hear a lot of crap, saying it is not working etc. Block is now 34661 and i didn't had any problems with my wallet, i receive a few stake coins and blocks are moving higher. The people with problems, ARE YOU USING THE LATEST WALLET!!!!???
June 02, 2014, 03:01:33 AM
For wallet testing on OSX I use the following config:
irc=1
server=0
listen=1
checklevel=2
txindex=1
staking=0
I leave staking disabled until fully synced.
I do the following:
Copy Vericoin data dir to Vericoin.bak
CD into Vericoin & delete everything.
Create the romaincoin.conf with what I have above.
Run the wallet & let it sync.
Close the wallet & copy your old wallet.dat over
Run Romancoin-Qt -salvagewallet & let that complete
Close wallet
Edit romancoin.conf & change staking=0 to staking=1 & save
Re-open, verify end results.
pcmerc~
http://pool.kryptochaos.com
irc=1
server=0
listen=1
checklevel=2
txindex=1
staking=0
I leave staking disabled until fully synced.
I do the following:
Copy Vericoin data dir to Vericoin.bak
CD into Vericoin & delete everything.
Create the romaincoin.conf with what I have above.
Run the wallet & let it sync.
Close the wallet & copy your old wallet.dat over
Run Romancoin-Qt -salvagewallet & let that complete
Close wallet
Edit romancoin.conf & change staking=0 to staking=1 & save
Re-open, verify end results.
pcmerc~
http://pool.kryptochaos.com
This is the right tutorial syncing the wallet , thank you for the support. Now we need bigger exchange listing the Romancoin and everithing would be nice..
June 02, 2014, 02:13:05 AM
so wallet still broke guys.how many cant sync past block 6671
June 01, 2014, 11:28:46 PM
[ROM] has been disabled on Europex because of sum amount differences on the wallet.
We are waiting for informations from the developper to be sure it's okay and back it up.
We are waiting for informations from the developper to be sure it's okay and back it up.
June 01, 2014, 09:49:50 PM
For wallet testing on OSX I use the following config:
irc=1
server=0
listen=1
checklevel=2
txindex=1
staking=0
I leave staking disabled until fully synced.
I do the following:
Copy Romancoin data dir to Romancoin.bak
CD into Romancoin & delete everything.
Create the romaincoin.conf with what I have above.
Run the wallet & let it sync.
Close the wallet & copy your old wallet.dat over
Run Romancoin-Qt -salvagewallet & let that complete
Close wallet
Edit romancoin.conf & change staking=0 to staking=1 & save
Re-open, verify end results.
pcmerc~
http://pool.kryptochaos.com
irc=1
server=0
listen=1
checklevel=2
txindex=1
staking=0
I leave staking disabled until fully synced.
I do the following:
Copy Romancoin data dir to Romancoin.bak
CD into Romancoin & delete everything.
Create the romaincoin.conf with what I have above.
Run the wallet & let it sync.
Close the wallet & copy your old wallet.dat over
Run Romancoin-Qt -salvagewallet & let that complete
Close wallet
Edit romancoin.conf & change staking=0 to staking=1 & save
Re-open, verify end results.
pcmerc~
http://pool.kryptochaos.com
June 01, 2014, 06:29:20 PM
I already had this:
addnode=188.226.153.94
Unfortunately it doesn't work. I see that other people have same issue, maybe Dev should consider place another versoin of wallet...
addnode=188.226.153.94
Unfortunately it doesn't work. I see that other people have same issue, maybe Dev should consider place another versoin of wallet...
June 01, 2014, 06:25:43 PM
We are experiencing these very same problems with the syncing of the new wallet. First we thought it was due to lack of nodes, but this appears to be something else. It has been syncing for 10 hours now and it is not anywhere near complete yet...
We are trying to find out what is wrong, but no luck so far.
We are trying to find out what is wrong, but no luck so far.
June 01, 2014, 06:03:48 PM
After adding this node my wallet still not in sync what a night mare with wallet
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
Just this
addnode=188.226.153.94
the wallet is still fucked, i lost again my minted pos coins
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
Just this
addnode=188.226.153.94
Do you have latest version?
I am having the same issues as him. Win 8.1 x64
It jumps to waiting for the last "block" to go way out of sync
me too
June 01, 2014, 05:39:44 PM
After adding this node my wallet still not in sync what a night mare with wallet
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
Just this
addnode=188.226.153.94
the wallet is still fucked, i lost again my minted pos coins
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
Just this
addnode=188.226.153.94
Do you have latest version?
I am having the same issues as him. Win 8.1 x64
It jumps to waiting for the last "block" to go way out of sync
June 01, 2014, 04:06:58 PM
After adding this node my wallet still not in sync what a night mare with wallet
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
Just this
addnode=188.226.153.94
the wallet is still fucked, i lost again my minted pos coins
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
Just this
addnode=188.226.153.94
Do you have latest version?
June 01, 2014, 04:02:00 PM
After adding this node my wallet still not in sync what a night mare with wallet
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
Just this
addnode=188.226.153.94
the wallet is still fucked, i lost again my minted pos coins
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
Just this
addnode=188.226.153.94
June 01, 2014, 03:55:01 PM
Block explorer done and working
http://romanchain.tk:5550/
You can donate if you like it RWJa3MSw7jceuhizuyrnRrUPiTQcYt2SG3
http://romanchain.tk:5550/
You can donate if you like it RWJa3MSw7jceuhizuyrnRrUPiTQcYt2SG3
June 01, 2014, 03:36:45 PM
the wallet is still fucked, i lost again my minted pos coins
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
Just this
addnode=188.226.153.94
June 01, 2014, 03:31:46 PM
the wallet is still fucked, i lost again my minted pos coins
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
Could you share your wallet conf settings..
June 01, 2014, 03:29:12 PM
the wallet is still fucked, i lost again my minted pos coins
Wallet is okay, but someone is still attacking and forking network.
No problems here, wallet is working, receive a few pos coins.
June 01, 2014, 03:21:41 PM
the wallet is still fucked, i lost again my minted pos coins
Wallet is okay, but someone is still attacking and forking network.
Jump to: